Download 11D - Road Race Engineering

11D-4
ENGINE OVERHAUL <2.4L ENGINE>
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS
Item
M1113023403892
Specification
Generator and ignition system
Idler pulley bolt
48 ± 7 N⋅ m (36 ± 4 ft-lb)
Auto tensioner bolt
22 ± 4 N⋅ m (17 ± 2 ft-lb)
Crankshaft pulley center bolt
210 N⋅ m (155 ft-lb)
Generator nut
44 ± 10 N⋅ m (32 ± 7 ft-lb)
Generator bolt
44 ± 10 N⋅ m (32 ± 7 ft-lb)
Ignition coil bolt
10 ± 2 N⋅ m (89 ± 17 in-lb)
Spark plug
25 ± 5 N⋅ m (18 ± 4 ft-lb)
Power steering pump bracket bolt (M8)
23 ± 2 N⋅ m (17 ± 1 ft-lb)
Power steering pump bracket bolt (M10)
44 ± 8 N⋅ m (33 ± 5 ft-lb)
Throttle body and EGR system
Vacuum pipe and hose bolt
11 ± 1 N⋅ m (98 ± 8 in-lb)
Throttle body bolt
9.5 ± 2.5 N⋅ m (84 ± 22 in-lb)
Throttle body stay bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
EGR valve support bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
EGR pipe bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
EGR support stay A bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
EGR support stay B bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
EGR valve bolt
24 ± 3 N⋅ m (18 ± 1 ft-lb)
Manifold absolute pressure (MAP) sensor screw
4.0 ± 1.0 N⋅ m (36 ± 8 in-lb)
Purge solenoid valve screw
4.0 ± 1.0 N⋅ m (36 ± 8 in-lb)
Intake manifold and fuel system
Oil dipstick guide bolt
10 ± 2 N⋅ m (89 ± 17 in-lb)
Injector protector rear bolt
3.5 ± 1.5 N⋅ m (31 ± 13 in-lb) →20 ± 2 N⋅ m
(15 ± 1 ft-lb)
Fuel rail bolt
3.5 ± 1.5 N⋅ m (31 ± 13 in-lb) →20 ± 2 N⋅ m
(15 ± 1 ft-lb)
Intake manifold bolt and nut
3.5 ± 1.5 N⋅ m (31 ± 13 in-lb) →20 ± 2 N⋅ m
(15 ± 1 ft-lb)
Intake manifold stay bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
Injector protector front bolt
3.5 ± 1.5 N⋅ m (31 ± 13 in-lb) →20 ± 2 N⋅ m
(15 ± 1 ft-lb)
Generator bracket bolt
44 ± 8 N⋅ m (33 ± 5 ft-lb)
Knock sensor bolt
20 ± 2 N⋅ m (15 ± 1 ft-lb)
Engine oil pressure switch
10 ± 2 N⋅ m (89 ± 17 in-lb)
Exhaust manifold
Exhaust manifold upper cover bolt <Except vehicles for
California>
14 ± 1 N⋅ m (124 ± 8 in-lb)
Exhaust manifold upper cover bolt <Vehicles for California>
8 ± 2 N⋅ m (71 ± 17 in-lb)
TSB Revision