Download TC-320 RDA Service manual

Product Controls
Service Manual
Item
Indication
z
The Status Indicator glows green during cloning.
z
The green Status Indicator goes out once cloning
Status of the target radio in
Wired Clone Mode
is completed.
When the radio is turned on, a power-on alert tone
sounds and the Status Indicator flashes orange once.
Power On (to enter User Mode)
When the radio is currently on a blank channel, it will
sound beep tones continuously.
Powering off
Low Battery Alert
When the radio is turned on, a power-off alert
tone will sound.
The Status Indicator will flash red, and a low-pitched
tone will sound every 10 seconds.
The Status Indicator will glow red during transmitting.
z
When the TOT timer expires, the radio will sound
beep tone continuously.
Transmitting
z
A TOT pre-alert tone will sound before the TOT
timer expires.
Receiving
The Status Indicator will glow green when carrier is
present.
z
The Status Indicator will flash green once per
second during scanning.
Scanning
z
Scan Start Alert (programmable by the dealer):
One beep will sound.
z
Scan End Alert (programmable by the dealer):
One beep will sound.
z
The Status Indicator glows red when the PC is
reading data from the radio.
Writing/Reading
4