Download Certification Report

CRP-C0396-01
(6)
Panel
An exclusive control device for the operation of MFP, equipped with a touch panel of a
liquid crystal monitor, ten-key, start key, stop key, screen switch key, etc. It is
controlled by "the part which provides interface via the panel."
(7)
Scanner unit / automatic document feeder
A device that scans images and photos from paper and converts them into digital data.
It is controlled by "the part which controls each device."
(8)
Printer unit
A device that actually prints the image data which were converted for printing when
receiving a print request by MFP controller. It is controlled by "the part which controls
each device."
(9)
Ethernet
It supports 10BASE-T, 100BASE-TX, and Gigabit Ethernet. It is controlled by "the
part which provides interface through the network."
(10) USB
It can be connected with a card reader corresponded to IC card. A card reader is not
pre-installed in MFP as a standard for selling circumstances, but sold as an optional
part. It is an essential component under this ST assumption.
(11) IC card
An IC card that supports the standard specification of Common Access Card (CAC)
and Personal ID Verification (PIV).
It supports "the part which executes common management" by the function which
decrypts a common key, operates a signature to message digest, and prepares a public
key.
(12) RS-232C
Serial connection using D-sub 9 pins connectors is usable. The maintenance function
is usable through this interface in case of failure.
(13) FAX Unit (*Optional part)
A device that has a port of Fax public line, which is used for transmitting and
receiving FAX via the public line.
It is not pre-installed in the MFP as a standard for selling circumstances, but sold as
an optional part. Fax unit is purchased when an organisation needs it, and the
installation is not indispensable.
13