Download W360 Multifunction Tabber System

W360 Tabber Service Manual
DISASSEMBLY AND ASSEMBLY
Feeder Front View
1.
Motor Speed Control
2. Low
er Forwarding Rollers
3. Upper
Forwarding Rollers
4. Feed
Rollers
5.
Feeder Main Drive Motor.
Removing the Drive Motor
10. Unplug the feeder from its power source.
11. Remove the non-operator side cover.
12. Unplug the motor from the Motor Speed control PC Board.
13. Remove the Take-up Roller by removing
the Allen screw [1].
14. Remove the four screws [2] that attach the
motor to the feeder frame.
15. Reassemble in reverse order.
47
SV62477 Rev. A