Download TANGO125 ANG

Transcript
ENGLISH
Rieju chassis
Chassis
21. ENGINE
*Remove the front lateral plates, the carburettor and the exhaust.
To make the task easier, remove the rear brake lever.
Disconnect the spark plug (A/F -36), the clutch cable (B/F -36) and the ventilation tube of
the engine (C/F -36).
To gain access to the top part disconnect the 2 terminals of the engine (D/F -37).
Unscrew the 2 bolts (E/F -36) of the engine front support.
After, unscrew the 4 bolts (F/F -36) that hold the engine.
ATTENTION: Extract the engine from the chassis cavity by the right side.
A
B
C
F
F
E
F-36
D
F-37
38