Download SRM-510ES

2
SERVICE INFORMATION
SRM-510ES
1 SERVICE INFORMATION
1-1 Specifications
Model
Dimensions* Length
Width
Height
Dry weight*
Engine
Type
Rotation
Displacement
Carburettor
Ignition
Starter
Fuel
Clutch
Handle
SRM-510ES (L)
mm(in)
mm(in)
mm(in)
kg(lb)
cm3(in3)
Bore
mm(in)
Stroke
mm(in)
Compression ratio
Type
Model
Venturi size -Throttle bore mm(in)
Metering diaphragm pressure
Type
SRM-510ES (U)
1860 (73.2)
355 (14.0)
655 (25.8)
324 (12.8)
460 (18.1)
8.5 (18.7)
8.8 (19.3)
KIORITZ, air-cooled, two-stroke, single cylinder
Anticlockwise as viewed from the output end
51.7 (3.155)
44.0 (1.732)
34.0 (1.339)
5.8
Rotary type : Diaphragm, horizontal-draught, with primer†
Walbro WYK-341
13.5 - 15.0 (0.531 - 0.591)
Lead pressure from inside of cleaner case
CDI (Capacitor discharge ignition) system
Digital magneto
RCJ-6Y, BPRM7A
ES (effortless-start)
3.8 x 1150 (0.15 x 45.3)
Premixed two-stroke fuel
50 : 1 (2 %)
Minimum 89 octane petrol (RON)
ISO-L-EGD (ISO/CD13738), JASO FC/FD
1.0 (33.8)
Centrifugal, 2 - shoe pivot
Spark plug
Type
Rope diameter x length mm(in)
Type
Mixture ratio
Petrol
Two-stroke air cooled engine oil
Tank capacity
L (U.S.fl.oz.)
Type
Front : Crescent loop with cushion grip
Type
Rear : Integrated control grip with cushion
Drive shaft
Type
Inner shaft: Diameter - Length
Gear case
Cutter
mm(in)
U-handle
with integratedcontrol grip
Solid, hollow type with serration (10-tooth)
8 - 1588 (0.31 - 62.5)
28 - 24 (1.10 -0.94)
1530 (60.2)
1.33
Spiral bevel gear
Housing
OD -ID mm(in)
(Main pipe)
Length mm(in)
Reduction ratio
Gear tooth
Lithium based grease or ECHO XTended Protection TM Lubricant
Lubrication
Type
Nylon line cutter
3-tooth blade (255mm)
Pilot diameter
mm(in)
25.4 (1.0)
Fastener type, size
mm
Left-hand thread nut, M10 x 1.25 pitch
Cutting rotation
Anticlockwise as viewed from top
OD: Outer diameter.
* Without shoulder harness and standard cutter.
†
Primer is on cleaner case.
ID: Inner diameter.