Download Arbitrary/Function Generators - Stanford Product Realization Lab

Arbitrary/Function Generators — AFG 3011 / 3021B / 3022B / 3101 / 3102 / 3251 / 3252
Characteristic
Other Waveforms
Noise Bandwidth (-3 dB)
Noise type
DC (into 50 Ω)
Arbitrary Waveforms
Arbitrary waveforms in Burst
Mode
Effective analog
bandwidth (-3 dB)
Nonvolatile memory
Memory: Sample rate
AFG3011
AFG3021B
AFG3022B
AFG3101
AFG3102
AFG3251
AFG3252
1 µHz to 100 kHz
10 MHz
1 µHz to 250 kHz
25 MHz
1 µHz to 1 MHz
100 MHz
1 µHz to 2.4 MHz
240 MHz
-10 V to +10 V
1 mHz to 5 MHz
1 mHz to 2.5 MHz
White Gaussian
-5 V to +5 V
-5 V to +5 V
1 mHz to 12.5 MHz
1 mHz to 50 MHz
1 mHz to 6.25 MHz
1 mHz to 25 MHz
-2.5 V to +2.5 V
1 mHz to 120 MHz
1 mHz to 60 MHz
8 MHz
34 MHz
100 MHz
4 waveforms
2 to 128 K: 250 MS/s
4 waveforms
2 to 128 K: 250 MS/s
4 waveforms
>16 K to 128 K: 250 MS/s
2 to 16 K: 1 GS/s
14 bits
≤8 ns
1 ns at 1 GS/s
4 ns at 250 MS/s
20 mVp-p to 10 Vp-p
Vertical resolution
Rise/Fall time
Jitter (RMS)
14 bits
≤80 ns
4 ns
Amplitude, 50 Ω Load
20 mVp-p to 20 Vp-p
Amplitude, Open Circuit
40 mVp-p to 40 Vp-p
Accuracy
±(2% of setting +2 mV)
(1 kHz sine wave, 0 V offset,
>20 mVp-p amplitude)
Resolution
Units
Output impedance
Load impedance setting
Isolation
Short-circuit protection
External voltage protection
DC offset range, 50 Ω load
DC offset range, open circuit
Accuracy
Resolution
225 MHz
4 waveforms
>16 K to 128 K: 250 MS/s
2 to 16 K: 2 GS/s
14 bits
14 bits
≤20 ns
≤3 ns
4 ns
500 ps at 2 GS/s
4 ns at 250 MS/s
10 mVp-p to 10 Vp-p
≤200 MHz: 50 mVp-p to 5 Vp-p
>200 MHz: 50 mVp-p to 4 Vp-p
20 mVp-p to 20 Vp-p
40 mVp-p to 20 Vp-p
≤200 MHz: 100 mVp-p to 10 Vp-p
>200 MHz: 100 mVp-p to 8 Vp-p
±(1% of setting +1 mV) (1 kHz sine wave, 0 V offset, >10 mVp-p amplitude)
0.1 mVp-p, 0.1 mVRMS, 1 mV, 0.1 dBm or 4 digits
Vp-p, VRMS, dBm (sine wave only)
50 Ω
Selectable: 50 Ω, 1Ω to 10.0 kΩ, High Z (Adjusts displayed amplitude according to selected load impedance)
42 Vpk maximum to earth
Signal outputs are robust against permanent shorts against floating ground
To protect signal outputs against external voltages use fuse adapter 013-0345-xx
±(10 Vpk – Amplitudepp/2)
±(5 Vpk – Amplitudepp/2)
±5 Vpk DC
±2.5 Vpk DC
±(20 Vpk – Amplitudepp/2)
±(10 Vpk – Amplitudepp/2)
±10 Vpk DC
±5 Vpk DC
±(2% of |setting| + 10 mV + 1%
±(1% of |setting| + 5 mV + 0.5% of amplitude (Vp-p))
of amplitude (Vp-p))
1 mV
Modulation
AM, FM, PM
Modulation: Max FM Peak Deviation
Characteristic
Description
Characteristic
Carrier Waveforms
Source
Internal Modulating
Waveform
All, except Pulse, Noise, and DC
Internal/External
Sine, square, ramp, noise, ARB
(AM: maximum waveform length 4,096;
FM/PM: maximum waveform length 2,048)
2 mHz to 50.00 kHz
Sine
Square
ARB
Others
Internal Modulating
Frequency
AM Modulation Depth 0.0% to +120.0%
Min FM Peak Deviation DC
Max FM Peak
See chart, below
Deviation
AFG3011
AFG3021B
AFG3022B
AFG3101
AFG3102
AFG3251
AFG3252
5 MHz
2.5 MHz
2.5 MHz
50 kHz
12.5 MHz
6.25 MHz
6.25 MHz
125 kHz
50 MHz
25 MHz
25 MHz
500 kHz
120 MHz
60 MHz
60 MHz
1.2 MHz
PM Phase Deviation – 0.0° to +180.0°
www.tektronix.com
3