Download P80 Console

P80 TV Settings Menu Table
Settings
Settings
Options
Channel Guide
Scan Channels
Region
Select the
United States
appropriate
region for your
location.
Volume Correction
Default Channel
Skip Unnamed
Channels
5db to -5db
Factory
Default
0db
Set a default
channel for the
equipment.
This is the
channel that
will display
when the TV is
turned on.
ON/OFF
ON
Configure/View/Test
1
Touch Scan Channels.
2
Scan will take approximately 30
minutes
1
Touch Region.
2
Select from the list.
3
Touch OK to save the selection.
Touch CANCEL to exit without
saving the selection..
1
Touch Volume Correction.
2
Adjusted the
arrows to the
desired db volume correction.
3
Touch OK to save the selection.
Touch CANCEL to exit without
saving the selection.
1
Touch Default Channel.
2
Select from the list.
3
Touch OK to save the selection.
Touch CANCEL to exit without
saving the selection.

Touch OFF to disable this function.
Note: Scans for digital channels will
add addition time to scan.
Closed Captioning
ON/OFF
1
Touch Closed Captioning
2
Touch on a radio button next to
either ON/OFF, a dot will fill the
radio button next to the desired
selection.
3
Touch OK to save the selection.
Touch CANCEL to exit without
ON
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 60