Download Instruction manual

CONTENTS
INTRODUCTION
PRECAUTIONS FOR SAFE OPERATION
ENVIRONMENTAL CONDITIONS
FREEZER COMPONENTS
Control panel
REMOTE ALARM TERMINAL
AIR INTAKE PORT
INSTALLATION SITE
INSTALLATION
START-UP OF UNIT
Operation after power failure
FUNCTION OF CONTROL PANEL
BASIC SCREEN OF CONTROL PANEL
RUNNING OPERATION (MENU/Set)
Chamber temperature setting (Temperature)
Alarm temp. setting (High Alarm/ Low Alarm)
Alarm delay time setting (Alarm Delay)
Ring back of alarm buzzer setting (Ring Back)
Key lock function
Key lock release function
VARIOUS SETTING (MENU/Log)
Display of log (Log)
Indication of log and transmission
VARIOUS SETTING (MENU/Tools)
Initialization (Tools/ Default Setting)
Set of date, time, log interval (Tools/Date Time)
Set of door alarm delay time (Tools/Door Delay)
Set of log interval (Tools/Log Interval)
Change of compressor delay time (Tools/Comp. Delay)
Set of key lock password (Tools/Key Lock PW Setting)
ALALRM BUZZER
MONITOR OF FREEZER STATUS
ALARMS & SAFETY FUNCTIONS
ROUTINE MAINTENANCE
Cleaning of cabinet
Defrosting of inside wall
Cleaning of air intake port
REPLACEMENT OF BATTERY
TROUBLESHOOTING
DISPOSAL OF UNIT
Recycle of battery
TEMPERATURE RECORDER (OPTION)
BACK-UP SYSTEM (OPTION)
MOUNTING OF INTERFACE BOARD (OPTION)
MOUNTING OF LAN INTERFACE BOARD (OPTION)
SPECIFICATIONS
PERFORMANCE
SAFETY CHECK SHEET
1
- 65 -
P. 2
P. 3
P. 7
P. 8
P. 10
P. 11
P. 11
P. 12
P. 13
P. 14
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 32
P. 33
P. 34
P. 36
P. 36
P. 37
P. 38
P. 39
P. 40
P. 40
P. 45
P. 47
P. 48
P. 49
P. 50
P. 51
P. 52