Download Mirage - Invacare

Transcript
1. Remove the motor end (6) via the two cross point screws using a No 1 cross
point screw driver.
2. Remove the two/three electro magnetic brake (1) fixing screws and remove the
brake.
3. Remove the brush (2) feeder wire termination screws, release the brush springs
and remove the brushes (2).
10.4
Assembly
1. To reassemble reverse the steps 1 to 3, taking care not to damage the brushes
and ensuring
correct alignment of the electro-magnetic brake.
2. Should there be fitting, scoring or wear then replace the Motor Unit.
20