Download WinPV User Guide Version 06

CHAPTER 5
Tuning Method
8
9
10
11
12
13
Turn the key off.
Remove the Power Vision.
Using the USB cable, connect the Power Vision to your computer.
Verify the Power Vision boots up and says PC Link Mode Active.
Launch the WinPV software application.
Verify the Power Vision software user level is set to Pro. Refer to To Setup the Options.
14 Select PowerVision >Get Tune from PV or click the Get Tune button
15 Select the Copy of Original or Copy of Current tune file.
16 Click OK.
.
This is the file that your tune will be built from. Use Save As to save this tune file to your
computer for safe keeping. In our example, we named the file OriginalTuneFile.pvt.
5-8
WinPV User Guide