Download WinPV User Guide Version 06

W O R K I N G W I T H P O W E R V I S I O N L O G TU N E R
Log Tuner
8
Click Apply Tune.
This will copy the new calculated VE and Spark values to the VE and Spark tables from
the original Power Vision value file. In our example, the LogTunerValueFile.pvv.
9 Click Save PVV.
10 Browse to the location where the LogTunerValueFile.pvv is stored
11 Select LogTunerValueFile.pvv, and click OK.
This will save the new calculated value file with the new VE values.
Log Tuner has corrected the front and rear cylinder VE tables based on actual AFR data
collected while riding the motorcycle. Log Tuner also will apply corrections to the spark
tables if knock was detected. The next step is to load the corrected .pvv file into your
tune file using WinPV. Refer to Apply the Corrected Value File to the Tune.
Version 6
WinPV User Guide
5-25