Download Foreword

VF5000 series high capacity vector control inverter service manual
Running command
passage
Setting of operating manual; setting of control terminal;
setting of serial port; switching by three ways.
Frequency setting
passage
Setting of keypad analog potentiometer; setting of
keypad▲
▲、▼keys. Setting of functional code digits. Setting
of serial port, setting of terminal UP/DOWN, setting of
analog voltage, setting of analog current; settting of
impulse, setting of combination; switching at any time by
kinds of settting ways.
Switch input passage
Forward/reverse rotating command, 6-way programmable
switching value input to set 21 functions.
Analog input passage
2-way analog signal input，0～20mA、0～10V optional.
Analog output
channel
Analog signal output 0～10V to get output of physical
quantity like frequency and output frequency.
Switch output
passage
2-way programmable open collector output; 1-way relay
output signal, to get output of different physical quantities.
LED display
Can display setting frequency、output voltage、output current
etc.
Display external
instrument
Display output frequency, output current, and output voltage
and so on.
Running
Keypad
Protection function
Option
Environ
ment
Structure
Over cuttent protection, over voltage protection, under
voltage, over-heat protection, over-load protection, missing
phase protection (in option) etc.
Brake subassembly, remote-control keypad, connecting cable
for remote-control keypad etc.
Use ambient
Indoor, not bare to sunlight, no dust, no corrosive gas, no
flammable gas, no oil fog, no vapor, no water drop or salt
etc.
Altitude
Lower than 1000m
Temperature
－10℃～＋40℃
Humidity
Smaller than 90%RH，no condensation water
Vibration
Smaller than 5.9m/s2
Storage temperature
－20℃～＋60℃
Defending frade
IP20
Cooling mode
By fan
Mountion mode
Wall hanging
- 11 -