Download Rubidium Frequency Standard

3.6
Rubidium Stats
3–5
Here is a sample screen shot pointing out the pertinent items of
interest.
3.6
Rubidium Stats
The tab labeled “Rb Stats” is used to monitor virtually all of the
PRS10’s settings. To view the current PRS10 settings, click on the
Rb Stats tab, make sure that the selected communications port is
correct and that the SIM900 mainframe has been CONNected to the
correct slot number (see section 3.4, and click the ”Connected” check
box to enable the connection. The screen should fill in with the
current PRS10 settings. The settings will be continuously updated
until you disconnect from the communications port by clicking on
the ”Connected” check box a second time to uncheck it.
A sample screen shot, taken while the PRS10 was warming up, is
shown below.
SIM940
Rubidium Frequency Standard