1
Download Be sure the battery is fully charged
Transcript
13-46 SUSPENSION Tie-Rod, Rocker Arm Tie-Rod Removal the brake lever slowly and hold it with a band • Squeeze [A]. • Raise the rear wheel off the ground with the jack. Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 • Remove: Upper Tie-Rod Nut and Bolt [A] Lower Tie-Rod Nut and Bolt [B] Tie-Rods [C] Tie-Rod Installation grease to the inside of the oil seals. • Apply the tie-rods so that the marked side faces [A] out• Install side. the tie-rod nuts with new ones. • Replace Tighten: • Torque - Tie-Rod Nuts: 59 N·m (6.0 kgf·m, 44 ft·lb) Rocker Arm Removal the brake lever slowly and hold it with a band. • Squeeze Raise the rear wheel off the ground with the jack. • Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 • Remove: Lower Rear Shock Absorber Nut and Bolt [A] Lower Tie-Rod Nut and Bolt [B] Rocker Arm Nut and Bolt [C] Rocker Arm [D] Rocker Arm Installation grease to the inside of the oil seals. • Apply Replace following nuts with new ones. • Rocker the Arm Nut • Tie-Rod Nut Rear Shock Absorber Nut (Lower) Tighten: Torque - Rocker Arm Nut: 34 N·m (3.5 kgf·m, 25 ft·lb) Tie-Rod Nuts: 59 N·m (6.0 kgf·m, 44 ft·lb) Rear Shock Absorber Nut (Lower): 34 N·m (3.5 kgf·m, 25 ft·lb)
