Download Order No. PHAT100601CE Service Manual
Transcript
Order No. PHAT100601CE (Revision : Oct. 2011) Service Manual Fully Automatic Washing Machine NA-F78B2 NA-F80B2 NA-F80H2 NA-F90B2 NA-F90H2 NA-F1002B Product Colour Silver (A) White (D) Grey (J) Destination Thailand, Indonesia, Vietnam, Malaysia, India Singapore (Local), Singapore (Export) Philippines, UAE (Local), Kuwait Qatar, Oman, Bahrain, Lebanon UAE (PGF), Libya WARNING The service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt within this service information by anyone else could result in serious injury or death. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer. © Panasonic Home Appliances (Thailand) Co., Ltd. 2010. All rights reserved. Unauthorized copying and distribution is a violation of law. NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B CONTENT Page 1. Attention in the Repair Work Security 2. Specifications 3. Features and Technical Information 3.1 Function Control with Fuzzy sensor 3.2 Power input and current 4. Installation 4.1 Checking of placement 4.2 Connect the water supply hose 4.3 Install Washing Machine to steady 4.4 Child Lock program 5. Operations Panel 5.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 5.2 NA-F80H2 / NA-F90H2 6. Wiring Diagram 6.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 6.2 NA-F80H2 / NA-F90H2 7. Table of Errors 8. Troubleshooting 8.1 Table of Troubleshooting 8.2 The following symptoms are not trouble 9. Disassembly Instruction 9.1 Remove screws of back panel out 9.2 Remove back panel out 10. Parts Exploded View and Replacement Parts List 10.1 Parts Exploded View : Part A 10.2.1 Replacement Parts List : Part A of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 10.2.2 Replacement Parts List : Part A of NA-F80H2 / NA-F90H2 10.3 Parts Exploded View : Part B 10.4.1 Replacement Parts List : Part B of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 10.4.2 Replacement Parts List : Part B of NA-F80H2 / NA-F90H2 10.5 Parts Exploded View : Part C 10.6.1 Replacement Parts List : Part C of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 10.6.2 Replacement Parts List : Part C of NA-F80H2 / NA-F90H2 10.7 Parts Exploded View : Packing Part 10.8.1 Replacement Parts List : Packing of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 10.8.2 Replacement Parts List : Packing of NA-F80H2 / NA-F90H2 Detail Change Notice -2- 3 4 5 6 7 8 9 9 9 10 11 12 12 13 14 15 - 16 17 17 18 19 20 21 22 23 24 25 26 27 28 29 30 NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 1. ATTENTION IN THE REPAIR WORK SECURITY In order to prevent any accident during repair work and ensure security of the product after repair work, somethings surely followed are explained below. ■ The level of the arised damages or dangers, when indicated contents are ignored, are classified by following indications and explained. WARNING The content in the column of this indication is “ Be assumed that possibly die or get seriously injured ”. content in the column of this indication is ATTENTION The “ Be assumed that possibly get damages or possibly only damage object occured ”. ■ Types of the contents being followed are classified by following figured symbols and explained. (The following is an example of expression in pictures) This figured symbol means caution “ ATTENTION ” This figured symbol means must not do “ PROHIBITION ” This figured symbol means surely execute “ INSTRUCTIONS ” WARNING Connectionof cables should be done according to regular work. • Connection of cables should be tightened reliably with strength using solderless terminal. (specified parts always using regular bonding plier) • Install a fire protection cover (fireproof) covering connectin area completely, and close opening areas by tape. (Please reuse the fire protection cover which came with the products). • When drawing cables around, fixing those cables with cable suppression part. Do not touch rotating part, high temperature part and surface of metal. • Be sure to replace with cable unit when any cable was snapped. When a part of the cable unit was cut, you must not do the connection repair. It may be the cause of smoke, ignition or receiving an electric shock. Be careful about receiving an electric shock. When doing electric connection service such as voltage measurement, please be careful enough about receiving an electric shock at electric charging parts and cable terminal parts. Pull out electric plug when doing repair work. Disassembling, assembling and replacing parts should be done after pulling out electric plug. Receiving an electric shock or getting an injury may occur. Be sure to use specified parts. Always use specified parts for the parts with mark in the electric circuit diagrams and parts list. It may be the cause of smoke, ignition or damage. Do not touch any rotating object with hand unless it stops completely. Slow rotation may also roll in your hands and cause injury. Rebuilding is prohibited. Do not rebuild machine parts and components when repairing service. It may be the cause of damage or ignition. Straightly pull out or insert in huasuton terminal. Do not twist it. It may be the cause of damage or ignition. ATTENTION Please wear gloves when disassembling, replacing and assembling. Always wear gloves to prevent an injury by the metal end face or an electric shock at the time of the electricity service Please be careful to the edges of the metal end face. Wear the working clothes of long sleeves to prevent an injury by the metal end face or please work after covering the end face with tape or towel. -3- NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 2. SPECIFICATIONS Model Rate voltage NA-F78B2 NA-F80B2 Vietnam Thailand, Vietnam, 220V/50Hz and Frequency NA-F80H2 NA-F1002B Vietnam Indonesia NA-F90B2 NA-F90H2 Thailand, Vietnam, Thailand, Vietnam, Sin-RBD Sin-RBD, UAE-PGF, Sin-RBD, UAE-PGF, Libya Libya 230V/50Hz Sin-DBD, India 230V/60Hz Philippines 240V/50Hz Malaysia, UAE (AFP), Colour Sin-DBD Sin-DBD India Philippines Malaysia, UAE (AFP), Malaysia Kuwait, Oman, Qatar, Kuwait, Qatar, Oman, Bahrain, Lebanon Bahrain, Lebanon Grey Silver Grey Grey Silver Grey Rate Power 220V/50Hz 470W/260W 450W/230W Consumption 230V/50Hz 490W/300W 470W/260W (Wash / Spin) 230V/60Hz 510W/330W 510W/330W 240V/50Hz 490W/300W 470W/260W Power 220V/50Hz 150 Wh 140 Wh Consumption 230V/50Hz 170 Wh 150 Wh (NA-F80 / F90) 230V/60Hz 170 Wh 160 Wh 240V/50Hz 170 Wh 150 Wh 150 Liter 154 Liter Wash 8.0 Kg 9.0 Kg Spin 8.0 Kg Standard Water Consumption Standard Capacity 9.0 Kg Pulsator with rated load (r.p.m.) 110 r / min Spin Tub with rated load (r.p.m.) Outer Dimension Product Weight 740 r / min Body 554 mm. x 598 mm. x 998 mm. Installation 597 mm. x 619.5 mm. x 1031 mm. Accessories 41 Kg 45 Kg Packing Water Supply Pressure 0.03 to 1 MPa (0.3 to 10 Kgf / cm2) / 8 ~ 25 liter / min. Motor Thermal Protector Motor Power Input : 320 Watts / Output : 180 Watts Safety Switch Checking Unbalance / Tub Lid Alarm Rings when finishing washing or unusual Fabric Softener Dispenser Have Filter Have Automatic Power - Cut Switch Have Bleach Dispenser Have Standard Water Consumption Standard Water Consumption Model : NA-F78B2 / NA-F80B2 / NA-F80H2 / NA-F1002B Model : NA-F90B2 / NA-F90H2 Wash Level Water Only High <High Lower> Medium <Medium Lower> Low 1 <Lower 1 Lower> Low 2 <Lower 2 Lower> Low 3 <Lower 3 Lower> 77 Liters 72 Liters 65 Liters 61 Liters 55 Liters 51 Liters 45 Liters 41 Liters 35 Liters 18 Liters Clothes Weight 8.0 Kgs 6.0 Kgs 5.0 Kgs 4.2 Kgs 3.5 Kgs 2.5 Kgs 1.5 Kgs 1.1 Kgs 0.8 Kgs 0.3 Kgs 69 Liters 65 Liters 60 Liters 56 Liters 52 Liters 48 Liters 43 Liters 38 Liters 33 Liters 18 Liters -4- Wash Level Water Only High <High Lower> Medium <Medium Lower> Low 1 <Lower 1 Lower> Low 2 <Lower 2 Lower> Low 3 <Lower 3 Lower> 77 Liters 72 Liters 65 Liters 61 Liters 55 Liters 51 Liters 45 Liters 41 Liters 35 Liters 18 Liters Clothes Weight 9.0 Kgs 6.0 Kgs 5.0 Kgs 4.2 Kgs 3.5 Kgs 2.5 Kgs 1.5 Kgs 1.1 Kgs 0.8 Kgs 0.3 Kgs 71 Liters 65 Liters 60 Liters 56 Liters 52 Liters 48 Liters 43 Liters 38 Liters 33 Liters 18 Liters NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 3. FEATURES AND TECHNICAL INFORMATION Program Time Normal Approx. 47 - 56 min Mini Approx. 20 min Soak Approx. 107 min High Speedy Approx. 21 - 27 min Blanket Approx. 55 min Delicate Approx. 29 - 32 min Tub Hygiene Approx. 150 min Soak 1 hour Approx. 107 min Soak 8 hour Approx. 527 min Product special features • Dial indicating detergent level after sensing wash level • Pre-set timer • Fabric softener dispenser • Detergent dispenser • Automatic power-off when finish • Dial indicating unusual sign (LED will blink) • Alarm ON-OFF • Overflow sensing device • Ag Shower (NA-F80H1 / NA-F90H1 only) - This has the disinfection effect with Ag+ - This can be used for the course marked with ★ Weight Sensor The weight is sensed by the moving force of the Pulsator, which changes a capacitor pole and releases a signal wave. The wave is changed into a pulse number from which the clothes weight is sensed. Prior to weight sensing for Normal and Strong program, the machine runs without water by spinning the Pulsator to left and right for 4.2 seconds (ON 0.3 second- OFF 0.4 second). The motor stops (OFF), a water system counts the pulse number, then calculates the accumulated pulse numbers for drawing water into the tub over a defined level. The dial will indicate High wash level. -5- High Low Medium Pulse Number Low High NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 3.1 Function Control with Fuzzy sensor Clothes quantity checking, wash level indication and detergent consumption indication with Fuzzy Logic System. Turn Switch “ON” Press “Start” button 1. Check clothes quantity 2. Check ambient temperature 1. Check clothes quantity and specify the amount of detergent <Checking Method> Check cross pressure at the capacitor while the Pulsator operates without water. <Motor status> Rotate clockwise Rotate clockwise Rotate clockwise stop stop stop stop A. Check clothes quantity B. Control wash time C. Control spin time Supply water to a proper level stop Rotate anti-clockwize stop Rotate anti-clockwize Rotate anti-clockwize 2. Temperature checking Check temperature in the atmosphere when the machine starts. In case of low temperature, wash timer and spin timer are extended automatically so that washed clothes are as clean as washing in high temperature. 1. Wash timer and spin timer with checked clothes quantity WASH RINSE SPIN Switch will automatically cut the power current “OFF” High Medium Low 3.0 Kg and more 1.2 Kg~3.0 Kg 0 Kg~1.2 Kg Wash Timer 12 min. 12 min. 9 min. Spin Timer 6 min. 6 min. 5 min. 2. Additional wash timer and spin timer as temperature increases External temp. 25°C 15°C 5°C 30°C Wash Timer +0 min. +2 min. +3 min. -1 min. Spin Timer +0 min. +1 min. +2 min. +0 min. -6- NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 3.2 Power input and current This clause of SA60335-2-4 and SA60335-2-7 is applicable except as follows. (1) Washing NA-F90H2 Power source 220V 50Hz 220 - 240V 50Hz 230V 60Hz NA-F80H2 Water load Rated load Water load Rated load Current (A) 1.6 - 2.4 1.8 - 2.6 1.6 - 2.4 1.8 - 2.8 Power consumption (W) 306 - 374 405 - 495 324 - 396 423 - 517 Current (A) 1.6 - 2.4 1.8 - 2.6 1.6 - 2.4 1.8 - 2.8 Power consumption (W) 342 - 418 423 - 517 360 - 440 441 - 539 Current (A) 2.1 - 2.9 2.2 - 3.0 2.1 2.9 2.2 - 3.0 Power consumption (W) 387 - 473 459 - 561 414 - 506 486 - 594 Note: To determine the value, integrate the data for 2min after 5min from starting motor and convert based on duty ratio of water flow for that period. (2) Spinning NA-F90H2 Power source 220V 50Hz 220 - 240V 50Hz 230V 60Hz NA-F80H2 Water load Rated load Water load Rated load Current (A) 0.7 - 1.3 0.8 - 1.4 0.7 - 1.3 0.9 - 1.5 Power consumption (W) 193 - 237 207 - 253 216 - 264 234 - 286 Current (A) 0.7 - 1.3 0.8 - 1.4 0.9 - 1.5 0.9 - 1.5 Power consumption (W) 221 - 269 234 - 286 252 - 308 270 - 330 Current (A) 1.1 - 1.9 1.2 - 2.0 1.1 - 1.9 1.2 - 2.0 Power consumption (W) 270 - 330 297 - 363 279 - 341 297 - 363 Note: To determine the value, integrate the data for 2.5min after 3.5min from starting motor and convert based on duty ratio of water flow for that period. -7- NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 4. INSTALLATION 4.1 Checking of placement Connect the water supply hose to the water supply valve screw. Elbow Water supply valve screw Nut 1. Push the water supply hose nut straights onto the water supply valve screw. 2. Hold the elbow by lifting it up, screw the nut onto the water supply valve screw, and firmly tighten the nut. 3. After the nut is tightened, check whether or not the elbow is unsteady or loose. 4. After tightening, open the faucet to confirm that there is no water leakage. [Cautions] Firmly tighten the nut, otherwise water leakage will result. Water Pressure Rating : 2.9 x 104 ~ 9.8 x 105 Pa Hose extension If extended external part is necessary when connecting the drain hose, the length of the drain hose should be less than 3 m and the height should be below 10 cm. Do not put hose tip under the water Below 10 cm Good Example 3 m max. Over 10 cm Install the machine 10 cm or more away from the wall. -8- NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 4.2 Connect the water supply hose [Note] - Firmly tighten part B of the water tap adaptor, otherwise water leakage will result. - When the hose must be reinstalled (after you remove, for example), turn B to the lelt until about 4 mm of the thread becomes visible, then carry out the procedure described above. Screw (4) Water faucet Water tap adaptor A B Lever Water supply hose cover Approx. 4 mm B 4.3 Install Washing Machine to steady - If a water tap adaptor is already connected, replace with the attached new one. Adjust Height of leg 1. Turn the adjustable leg knob towards (Loosen) direction to loose it. 2. Turn the adjustable leg to adjust the levelness. 2.1 When increasing height, turn adjustable leg towards (Loosen) direction. 2.2 When decreasing height, turn adjustable leg towards (Tighten) direction. 3. Turn the adjustable leg knob towards (Tighten) direction to tighten it. If the floor is largely inclined Use board or a like for prop up under leg of washing machine Adjustable leg knob Tighten Loosen Adjustable leg To raise To lower 4.4 Child Lock program Press the [POWER OFF/ON] button for at least 5 seconds. The buzzer sounds (two time for setting) and the [CHILD LOCK] indication turns on. Open lid Less than 10 sec. More than 10 sec. Buzzer on Water drain Close lid Buzzer on and abnormal alarm -9- Buzzer off Unplug the power cord from the outlet and re-plug it again after 5 seconds Water Level Linear Water Level 71 60 52 43 33 18L Wash 12 9 6 3 min - 10 - NA-F80B2. RINSE (NA-F80B2 ) 69 60 52 43 33 18L WATER LEVEL (Water Volume Display) RESERVE Rinse 1 times Refill 3 2 Spin 5 3 min 40s 7 hours min Child Lock WASH/SPIN AIR DRY Reserve Program Reserve Time Left TIME DISPLAY Air Dry 4 Extra Rinse Program Off Pause NA-F90B2 START/PAUSE On Start ( Auto Off ) PROGRAM (Course Select) (Press 5 seconds) Child Lock/Unlock 7 Tub Hygiene 6 Soak 2 Speedy 3 Delicate 5 Blanket 1 Normal Power OFF/ON NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 5. OPERATIONS PANEL 5.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B WASH, SPIN WATER LEVEL RINSE RESERVE TIME DISPLAY AIR DRY - 11 AG CRYSTAL SHOWER PROGRAM OFF/ON START/PAUSE NA-F90H2 NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 5.2 NA-F80H2 / NA-F90H2 NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 6. WIRING DIAGRAM 6.1 NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B 6.2 NA-F80H2 / NA-F90H2 - 12 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 7. TABLE OF ERRORS Error Indication If the following indications appear on the display panel (buzzer sounds, U and H Characters appear). • Check if abnormalities listed below are seen in the external water hose. • Is the hose connected? • Is it clogged with lint? • Is it crushed? • Is the tip soaked in water? • Is a part of hose at a height of over 10 cm midway? • Is the extension hose longer than 3 m? • Is the hose being used too small? Restart with opening and closing the lid. • Check if the lid is opened. • Close the lid. • Is the washing machine is an unsteady position, or is it on an inclined floor surface? • Is the laundry unevenly distributed in the tub? • Arrange the laundry evenly in the tub, then close the lid. • Check if you have forgotten to connect the water hose and to turn on the faucet. • Is the water supply cut off? Restart with opening and closing the lid. • Check if lid is open when draining operation of the [CHILD LOCK] program is ON. • In case of H displays such as “H01”, with no buzzer sounds pull out the power plug, and contact your dealer for service. - 13 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 8. TROUBLESHOOTING Machine No light at the dial does not work Dial light is on Unusual amount of water inside machine Packing valve Holding spring Capacitor Mechanism case Gear motor Water level sensor Safety switch Control panel Corresponding device Problem (have to check) Water Inlet Valve 8.1 Table of Troubleshooting Others 0 0 0 No sound of water from inlet valve 0 0 There is sound of water from inlet valve Check water supply Not enough water flow Check water supply Water never stops flowing in 0 0 0 Washing Pulsator does not spin (no sound of motor) system Pulsator does not spin (there is sound of does not work motor) 0 Motor 0 0 Pulsator spins only one way 0 Pulsator spins slowly 0 Unusual draining No draining 0 Drains slowly 0 Unusual spinning system No spinning (no sound of motor) Belt, Motor 0 Pulley, Motor Belt, Motor 0 0 0 No spinning (Pulsator spins) 0 0 No force in spinning (tub spins slowly) 0 Unusual loud noise Loud noise during dry spinning 0 Check installation Water leak Water leaks from drain pipe 0 0 Something clogged Incorrect working Loud noise during washing Belt, Motor Water leaks at the bottom of machine Drain pipe A, Pulsator Water is supplied during spinning Unbalanced tub, leaning Rinses more than 3 times 0 Pulsator spins despite no water 0 Cannot change function program 0 0 0 Unbalanced tub, leaning Air pipe clogged Description of usage Water does not flow out of a filter Description of usage No overflow during water filling as rinsing Description of usage Selected washing program cannot be memorized Description of usage Fabric softener flows away too fast Description of usage Pulsator spins in short range as washing and rinsing Description of usage Works at low wash level then supplies water again Description of usage - 14 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 8.2 The following symptoms are not trouble. Symptoms Causes Machine begins filling water in the middle of the wash. • When the laundry amount is large at the HIGH water level, the machine sometimes fills automatically. When level goes down, the machine fills automatically. The water level is too high for the amount of laundry being washed. • When the laundry is already soaked with water before the wash is started, or if there is water in the tub before the wash is started, the water level will sometimes be higher. The water level is too low for the amount of laundry being washed. • With light laundry made of synthetic or blended fabric, the water level will sometimes be lower. Midway during spinning, the operation suddenly changes to rinsing. • When the laundry is unbalanced during spin, rinsing and automatic correction of unbalanced laundry will begin. Later spinning will return to normal condition. Water does not flow through the lint filter. Double Cascade does not operate. • When the water level is set to very low, water sometimes will not flow through the lint filter. Double Cascade does not operate when these settings have been selected. The water is drained even filled by a bucked. • Do not leave more than 15 seconds while powered on. Fill the water while powered off or after pushing the start button. Softener spills out from softener drawer. • Keep the level of the softener indicated to prevent the softener from flowing immediately. • If you close the softener drawer forcefully, softener may spill out of the drawer. During draining, the laundry and the spinner rotates with irregular movements. • To suppress soap suds build-up, the washing tub turns slowly and quickly. The buttons do not work. • Only the [WATER LEVEL] button is available after the machine begins washing. • To change the setting, press the [Power Off] button and reconfigure the setting. If you start with the rinse cycle, the tub is not filled with water. • When there is water in the tub, the operation starts with the draining. After spin cycle is finished, the tub will be filled with water. Washing machine does not run at all. • Check if there is power failure. • Check if the power fuse has blown out or the breaker is actuated. • Check if the power plug is plugged in thoroughly. • Check if the “power switch” has been pressed. • Has the water faucet been turned on? • Check if the [START/PAUSE] button has been pressed. • Has the machine been programmed under [RESERVE] timer? - 15 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B Symptoms Causes Water is not supplied. • Check if the water faucet is turned on. • Is the water supply cut off? • Check if the connection of the water supply hose is clogged with dirt. • Check if the lid is opened. Close the lid. Washing operation still continue even though the expected finishing time had passed on Reserve Program. • Washing time will be longer because of laundry unbalance, water feeding and draining condition. Buzzer sounds followed by a draining when opening the lid during wash and rinse. • In the case when open the lid after setting the [CHILD LOCK] mode, it will force the draining process. Pull out power plug from the outlet and replug it after 5 seconds. Buzzer sounds when opening the lid during cascade rinsing or spinning. • This is a remainder for a user not to put a hand and / or any object into the tub. It is not out of order. To turn off the buzzer, close the lid. Tub shaking with the sound of water. • This is the sound of the liquid to maintain the balance during spinning. Water supply failure. • Normally after the water supply failure, the water will become muddy. Detach the water feeding hose and turn on the water faucet to release to due muddy water. Fix water hose and start washing. Power failure. • In this case, [Power On] and [Start/Pause] buttons need to be pressed again after electricity is restored. Then the machine will resume operation automatically from beginning of the stopped process. - 16 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 9. DISASSEMBLY INSTRUCTION 9.1 Remove Screws of Back Panel out Fig. 1 - Take out by use screwdriver. 9.2 Remove Back Panel out Fig. 2 Fig. 3 - Insert fingers through inside of Back Panel (Fig. 2). - Pull it back a little for Hooks at upside loose (Fig. 3). Fig. 4 Fig. 5 - Use the finger for pull end of Hook (Fig. 5) loose from the Base Unit (Fig. 4) - After Hook loose 1 side / We can remove it by twist Back Panel a little. - If it is difficult to remove / Have to use the finger to pull another side. - 17 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10. PARTS EXPLODED VIEW AND REPLACEMENT PARTS LIST 10.1 Parts Exploded View : Part A A22 A23 A24 A35 A34 NA-F80H2/NA-F90H2 NA-F80H2/NA-F90H2 A4 A13 A25 NA-F80H2/NA-F90H2 A28 A15 A27 A16 A11 A26 A21 NA-F80H2 / NA-F90H2 A5 NA-F78B2, 80B2 NA-F90B2 / F1002B A7 A7 A18 A12 A8 A8 A14 A17 A1 A1 NA-F78B2 / NA-F80B2 NA-F90B2 / F1002B NA-F80H2 / NA-F90H2 A6 A10 A19 A29 A3 A9 A20 A2 A30 E B A coVA EADDV Li ET BA ar A ne at T W er 12 9 er at l W ve La l ve Le 71 60 52 43 33 L 18 A31 6 3 W ll efi R 3 in m 2 ash 1 7 5 3 se Rin es tim Pr in e Le in Sp e m rv Ti m se ra Re og s 40 m ft Ch A32 ild Lo ck er 1 ve s ur ho in m Res 4 et nk ne la B ak ygie 5 H So 6 b al 7 Tu orm edy N am e te gr Sp lica inse 2 Pro e R D ra 3 Ext A ir D ry ( er ) w Off PoAuto ff O n O (Pr ck nlo s) /U ck cond Lo Se ild s & Ch es P rt Staause 2 B 90 A-F N A33 - 18 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B Important safety notice : Components identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified part. 10.2.1 Replacement Parts List : Part A of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B Parts List MODEL REF. NO. PART NAME PART NO. SAFETY COUNTRY / Q’TY F78B2 F80B2 F90B2 F1002B TH A1 PANEL A AXW01307LF00 1 A2 PANEL FACE B AXW01467LF00 1 SIN- SININDO VIET MAL INDIA DBD RBD 1 1 AXW01467LF50 AXW01467LJA0 AXW001G7LF00 A5 LID PACKING A AXW01646UP00 1 UAEPGF LIB 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A6 LEVELLER AXW03536DKA0 1 A7 SPINNER LID LABEL AXW11177BK0A 1 A8 FEEDING PORT PACKING AXW02676UP00 A9 PRINT BASE UNIT AXW11177BK5A 1 AXW024Q7LF00 S 1 AXW024Q7LJ00 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A10 CONNECTOR LEAD WIRE AXW014A7LF00 UNIT S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A11 FEEDING VALVE AXW292120906 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A12 PRESSURE SENSOR UNIT AXW024T03510 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 A13 LID HINGE SHAFT AXW01937JS00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 A14 SUB DRAIN HOSE UNIT AXW002Q7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A15 DETERGENT CASE UNIT AXW021B6XC00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A16 SAFETY SWITCH AXW166123700 A17 CONTACT LEVER B AXW16966XB00 REMARK 1 AXW01467RP00 LID UNIT 1 LEB 1 AXW01467RN00 A4 1 BAR 1 AXW01467LJ50 AXW01027LE0E 1 UAEKUW OMAN QAT AFP 1 AXW01467LJ00 BODY B 1 1 AXW01467LFA0 A3 1 PHI S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A18 SWITCH LEVER AXW11927LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A19 LID HINGE SPRING AXW11167LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A20 PANEL FACE A AXW01457LF00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A21 DETERGENT CASE B AXW21516XC0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A26 INSTRUCTION B AXW99596XB0J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A27 NOZZLE HOLDER AXW08396XC0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A30 INSULATION SPACER A AXW04867LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A31 CONTROLLER UNIT AXW024C7LF06 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A32 INSULATION SPACER B AXW04877LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A33 PANEL A SHEET AXW01437LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 BAR LEB UAEPGF LIB Screws MODEL REF. NO. PART NAME PART NO. SAFETY COUNTRY / Q’TY F78B2 F80B2 F90B2 F1002B TH SIN- SININDO VIET MAL INDIA DBD RBD PHI UAEKUW OMAN QAT AFP REMARK SPECIAL TAPPING SCREW XTWAXW469J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 BODY B ~ BODY AU BINDING TAPPING SCREW XTB4+12CFJ 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 NOZZLE UNIT XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 SAFETY SW. ~ BODY B XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 PANEL A XTB4+15CFJ 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 PRINT BASE U ~ BODY B XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 FEEDING VALVE ~ BODY B XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 CONTROLLER HOLDER ~ BODY B - 19 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.2.2 Replacement Parts List : Part A of NA-F80H2 / NA-F90H2 Parts List COUNTRY / Q’TY MODEL REF. NO. PART NAME PART NO. SAFETY F80H2 F90H2 TH VIET 1 A1 PANEL A AXW01307LE00 1 A2 PANEL FACE B AXW01467LE00 1 AXW01467LE50 AXW01467LEA0 SINMAL INDIA DBD 1 1 1 1 BODY B AXW01027LE0A LID UNIT AXW001G7LE00 A5 LID PACKING A LEB UAEPGF LIB 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW01646UP00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 S A6 LEVELLER AXW03536DKA0 1 A7 SPINNER LID LABEL AXW11177BK0A 1 A8 FEEDING PORT PACKING AXW02676UP00 A9 PRINT BASE UNIT AXW024Q7LE00 S AXW024Q7LG00 S AXW11177BK5A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A10 CONNECTOR LEAD WIRE UNIT AXW014A7LE00 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A11 FEEDING VALVE AXW292120806 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A12 PRESSURE SENSOR UNIT AXW024T03510 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A13 LID HINGE SHAFT AXW01937JS00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 A14 SUB DRAIN HOSE UNIT AXW002Q7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A15 DETERGENT CASE UNIT AXW021B7LE00 A16 SAFETY SWITCH AXW166123700 A17 CONTACT LEVER B A18 SWITCH LEVER A19 REMARK 1 AXW01467LGA0 A4 PHI 1 AXW01467LG50 A3 1 BAR UAEKUW OMAN QAT AFP SINRBD 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW16966XB00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW11927LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 LID HINGE SPRING AXW11167LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A20 PANEL FACE A AXW01457LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A21 DETERGENT CASE B AXW21516XB0A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A22 WINDOW AXW21057LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A23 TABLET PLATE AXW07537BK0A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A24 TABLET UNIT AXW007E7BK10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A25 NOZZLE UNIT AXW008E7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A26 INSTRUCTION B AXW99596XB0J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A27 NOZZLE HOLDER AXW08396XB0A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A28 PANEL A SEAL AXW11637BK0A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A29 INSTRUCTION C AXW99607BK00 1 S AXW99607BK50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A30 INSULATION SPACER A AXW04867LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A31 CONTROLLER UNIT AXW024C7LE06 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A32 INSULATION SPACER B AXW04877LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A33 PANEL A SHEET AXW01437LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A34 FILTER C UNIT AXW003V7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A35 FILTER COVER AXW22087LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 BAR LEB UAEPGF LIB Screws MODEL REF. NO. PART NAME PART NO. SAFETY F80H2 F90H2 COUNTRY / Q’TY TH VIET SINMAL INDIA DBD SINRBD PHI UAEKUW OMAN QAT AFP REMARK SPECIAL TAPPING SCREW XTWAXW469J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 BODY B ~ BODY AU BINDING TAPPING SCREW XTB4+12CFJ 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 NOZZLE UNIT XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 SAFETY SW. ~ BODY B XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 PANEL A XTB4+15CFJ 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 PRINT BASE U ~ BODY B XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 FEEDING VALVE ~ BODY B XTB4+15CFJ 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 WINDOW ~ NOZZLE B XTB4+15CFJ 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 CONTROLLER HOLDER ~ BODY B - 20 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.3 Parts Exploded View : Part B B16 B20 B14 B17 B7 B14 B18 B1 B8 B2 B19 B2 B15 B16 B9 B10 B11 B21 C24 B22 B3 B4 B4 B4 B5 B6 Accessories B12 B13 - 21 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.4.1 Replacement Parts List : Part B of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B Parts List MODEL REF. NO. B1 PART NAME BODY A UNIT PART NO. SAFETY COUNTRY / Q’TY F78B2 F80B2 F90B2 F1002B TH AXW001A7LE0E INDO VIET MAL INDIA 1 AXW001A7LE5E 1 1 1 1 SIN- SINDBD RBD 1 PHI 1 UAEKUW OMAN QAT AFP 1 1 1 1 BAR LEB UAEPGF LIB 1 1 1 1 1 GRIP AXW01107JP0J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 B3 BASE A AXW03017JP10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B4 LEG COVERING AXW03397JS00 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 B5 ADJUSTABLE LEG THUMB AXW03436JZ00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B6 ADJUSTABLE LEG AXW03357EC00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B7 CAPACITOR AXW04037P917 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B8 BACK PANEL AXW01566ZV10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B9 POWER CORD UNIT AXW004A83400 S AXW004A77264 S 1 1 1 1 1 1 AXW047A72914 S AXW004A72934 S AXW004A73014 S AXW004A73503 S B10 CHEMICAL COVER B11 DRAIN INSTRUCTION 1 1 1 1 TYPE : C2 + EARTH TYPE : C2 1 AXW99047BK10 B13 BOTTOM COVER TYPE : S3 1 TYPE : C3 1 TYPE : B3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW99047BK60 COLOUR : GREY TYPE : A2 1 1 AXW012D7BR00 1 1 AXW04487EC00 B12 SERVICE PRESSURE HOSE UNIT 1 COLOUR : GREY COLOUR : GREY (EXT-EARTH) B2 S REMARK LANGUAGE : THAI LANGUAGE : ENGLISH AXW21586ZR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B14 BODY A PROTECTION (B-L) AXW90466NTB0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 t = 30 mm B15 BODY A PROTECTION (F) AXW90467LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 t = 40 mm B16 BODY A PROTECTION (B-R) AXW90466AA6M 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 t = 1 mm x 120 mm B17 BODY A PROTECTION (L) AXW90467JP50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 t = 1 mm x 240 mm 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B18 NAME PLATE AXW01537LF00 S AXW01537LF50 S AXW01537LJ00 S AXW01537LJ50 S AXW01537LJF0 S AXW01537RN00 S AXW01537RP00 S 1 1 1 1 1 1 1 1 B19 WIRING DIAGRAM AXW04707LF00 1 B20 EARTH WIRE UNIT (EXTERNAL) AXW030C6SP20 B21 HOSE HOLE COVER A AXW01287JP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B22 FLEXIBLE HOSE B UNIT AXW002E6XB10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 BAR LEB UAEPGF LIB S 1 1 1 1 1 1 1 1 1 1 Screws COUNTRY / Q’TY MODEL REF. NO. PART NAME PART NO. SAFETY PAN HEAD SCREW XSN5+10BNS 1 1 SPECIAL TAPPING SCREW XTTAXW444J 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 FOR BASE A XTTAXW444J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 FOR BACK PANEL XTTAXW444J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 FOR BOTTOM COVER PAN HEAD TAPPING SCREW XTN4+8HFJ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FOR EARTH U ~ BODY A BIND TAPPING SCREW XYNAXW438J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FOR CAPACITOR F78B2 F80B2 F90B2 F1002B TH SIN- SININDO VIET MAL INDIA DBD RBD PHI UAEKUW OMAN QAT AFP 1 - 22 - REMARK FOR EARTH WIRE UNIT NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.4.2 Replacemen4 Parts List : Part B of NA-F80H2 / NA-F90H2 Parts List MODEL REF. NO. B1 PART NAME BODY A UNIT PART NO. SAFETY F80H2 F90H2 AXW001A7LE0A COUNTRY / Q’TY TH 1 AXW001A7LE5A B2 GRIP B3 B4 VIET SINMAL INDIA DBD 1 1 2 2 2 BASE A AXW03017JP10 1 1 1 LEG COVERING AXW03397JS00 4 4 4 B5 ADJUSTABLE LEG THUMB AXW03436JZ00 1 1 B6 ADJUSTABLE LEG AXW03357EC00 1 B7 CAPACITOR AXW04037P917 B8 BACK PANEL AXW01566ZV10 B9 POWER CORD UNIT AXW004A72934 S AXW004A83400 S AXW040A73503 S AXW004A77264 S AXW004A72914 S AXW004A73014 S B11 DRAIN INSTRUCTION UAEKUW OMAN QAT AFP BAR LEB UAEPGF LIB 1 1 1 1 1 1 1 COLOUR : SILVER COLOUR : GREY COLOUR : SILVER (EXT-EARTH) 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 TYPE : C3 1 TYPE : A2 1 TYPE : B3P 1 1 1 1 1 1 1 1 1 TYPE : S3 1 1 1 1 1 1 AXW99047BK10 1 1 TYPE : C2 + EARTH TYPE : C2 1 AXW04487EC00 REMARK 1 1 2 S PHI 1 1 AXW01107JP0J B10 CHEMICAL COVER 1 SINRBD 1 1 1 1 1 1 1 1 1 1 1 AXW99047BK60 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B12 SERVICE PRESSURE HOSE UNIT AXW012D7BR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B13 BOTTOM COVER AXW21586ZR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B14 BODY A PROTECTION (B-L) AXW90466NTB0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 t = 30 mm B15 BODY A PROTECTION (F) AXW90467LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 t = 40 mm B16 BODY A PROTECTION (B-R) AXW90466AA6M 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 t = 1 mm x 120 mm B17 BODY A PROTECTION (L) AXW90467JP50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 t = 1 mm x 240 mm B18 NAME PLATE AXW01537LE00 S AXW01537LE50 S 1 1 1 1 1 1 1 1 1 1 AXW01537LEF0 S AXW01537LGA0 S AXW01537LG50 S 1 1 1 1 1 1 1 1 1 1 1 1 1 B19 WIRING DIAGRAM AXW04707LE00 B20 EARTH WIRE UNIT (EXTERNAL) AXW030C6SP20 B21 HOSE HOLE COVER A AXW01287JP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B22 FLEXIBLE HOSE B UNIT AXW002E6XB10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 BAR LEB UAEPGF LIB 1 S 1 1 1 1 1 1 1 Screws COUNTRY / Q’TY MODEL REF. NO. PART NAME PART NO. SAFETY F80H2 F90H2 TH VIET SINMAL INDIA DBD SINRBD PHI 1 UAEKUW OMAN QAT AFP REMARK FOR EARTH WIRE UNIT PAN HEAD SCREW XSN5+10BNS SPECIAL TAPPING SCREW XTTAXW444J 10 10 10 10 10 10 10 1 10 10 10 10 10 10 10 10 FOR BASE A XTTAXW444J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 FOR BACK PANEL XTTAXW444J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 FOR BOTTOM COVER PAN HEAD TAPPING SCREW XTN4+8HFJ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FOR EARTH U ~ BODY A BIND TAPPING SCREW XYNAXW438J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FOR CAPACITOR - 23 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.5 Parts Exploded View : Part C C1 C2 C3 C4 C5 C6 C22-1 C25 C7 C26 C27 C22 C8c C8c (For H2 Model) C8a C8b C9 C17 C28 C16 C24 C29 C19 C10 C23 C18 C11 C12 C20 C21 C13 C14 C15 - 24 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.6.1 Replacement Parts List : Part C of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B Parts List MODEL REF. NO. PART NAME PART NO. SAFETY COUNTRY / Q’TY F78B2 F80B2 F90B2 F1002B TH INDO VIET MAL INDIA SIN- SINDBD RBD PHI UAEKUW OMAN QAT AFP BAR LEB UAEPGF LIB C1 OUTER TUB COVER AXW32246CH10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C2 O-RING AXW02577BK00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C3 PULSATOR AXW05016ZR0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C4 SHAFT BUSHING AXW05046ZR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C5 SPINNER SHAFT FLANGE AXW15176RU00 NUT 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C6 SPINNER FLANGE WASHER B AXW151980200 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C7 FILTER UNIT REMARK AXW022A7JT0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FRAME : GREY C8a SUSPENSION UNIT (F-L) AXW034U7LEA0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FRONT : LEFT C8b SUSPENSION UNIT (F-R) AXW034U7LE50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FRONT : RIGHT C8c SUSPENSION UNIT (R-RL) AXW034U7LE00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 REAR : RIGHT & LEFT C9 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 OUTER TUB A AXW12016CG20 C10 MOTOR WASHER A AXW04207BK00 C11 MOTOR AXW040158606 S 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 C12 MOTOR WASHER B AXW04217BK10 2 2 2 2 2 2 2 C13 MOTOR PULLEY AXW04116XB00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW04107LE00 C14 V-BELT 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW041219850 1 AXW04127BL50 C15 SPINNER PLATE B AXW32327BL00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C16 VALVE UNIT AXW009D6ZR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C17 GEARED MOTOR AXW348202516 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C18 LEAD WIRE UNIT AXW014B6UP00 S C19 OVER FLOW HOSE B AXW02345TW0M C20 EARTH WIRE UNIT (INTERNAL) AXW003F6UP00 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C21 MECHA-CASE UNIT AXW020A6UA60 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C22 TUB UNIT AXW002A7LF00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C22-1 BALANCER UNIT C23 FLEXIBLE HOSE A UNIT AXW035A5TP0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW002D6RU00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C24 HOSE BAND AXW02457EC00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C25 TUB C UNIT AXW12U6ZR0E 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 C26 TUB B UNIT AXW012T7BK0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C28 BALANCE WEIGHT AXW12317LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C29 OUTER TUB B AXW12027BK00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 BAR LEB UAEPGF LIB Screws MODEL REF. NO. PART NO. SPECIAL TAPPING SCREW XTWAXW529 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 TUB A ~ TUB D XTBAXW453 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 TUB A ~ TUB C PAN HEAD TAPPING SCREW XTN4+8HFJ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EARTH U ~ BODY A XTN4+8HFJ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EARTH U ~ OUTER TUB B SPECIAL SMALL SCREW XSSAXW682 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PULSATOR UNIT SPECIAL BOLT XVGAXW703J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MOTOR PULLEY XVGAXW839J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOTOR XVGAXW812J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 MECHA CASE ~ OUTER TUB B XTWAXW6517J 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 OUTER TUB A, B XTWAXW6517J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 SPINNER PLATE B XTWAXW6518J 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 GEARED MOTOR (CLUTCH) XTWAXW435 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 OUTER TUB COVER XTWAXW6517J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 VALVE UNIT SPECIAL TAPPING SCREW SAFETY COUNTRY / Q’TY PART NAME F78B2 F80B2 F90B2 F1002B TH INDO VIET MAL INDIA - 25 - SIN- SINDBD RBD PHI UAEKUW OMAN QAT AFP REMARK NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.6.2 Replacement Parts List : Part C of NA-F80H2 / NA-F90H2 Parts List COUNTRY / Q’TY MODEL REF. NO. PART NAME PART NO. SAFETY F80H2 F90H2 TH VIET SINMAL INDIA DBD SINRBD PHI UAEKUW OMAN QAT AFP BAR LEB UAEPGF LIB REMARK C1 OUTER TUB COVER AXW32246CH10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C2 O-RING AXW02577BK00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C3 PULSATOR AXW05016ZR1E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C4 SHAFT BUSHING AXW05046ZR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C5 SPINNER SHAFT FLANGE NUT AXW15176RU00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C6 SPINNER FLANGE WASHER B AXW151980200 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C7 FILTER UNIT AXW022A7FX1A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FRAME : BLUE C8a SUSPENSION UNIT (F-L) AXW034U7LEA0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FRONT : LEFT C8b SUSPENSION UNIT (F-R) AXW034U7LE50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FRONT : RIGHT C8c SUSPENSION UNIT (R-RL) AXW034U7LE00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 REAR : RIGHT & LEFT C9 OUTER TUB A AXW12016CG20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C10 MOTOR WASHER A AXW04207BK00 C11 MOTOR AXW040157626 C12 MOTOR WASHER B C13 MOTOR PULLEY 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AXW04217BK10 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AXW04116XB00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 S AXW04107FV00 C14 V-BELT 1 AXW041219850 1 1 1 1 1 1 AXW04127BL50 1 C15 SPINNER PLATE B AXW32327BL00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C16 VALVE UNIT AXW009D6ZR00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C17 GEARED MOTOR AXW348202516 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C18 LEAD WIRE UNIT AXW014B6UP00 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C19 OVER FLOW HOSE B AXW02345TW0M 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C20 EARTH WIRE UNIT (INTERNAL) AXW003F6UP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C21 MECHA-CASE UNIT AXW020A6UA60 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C22 TUB UNIT AXW002A7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C22-1 BALANCER UNIT AXW035A5TP0E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 S C23 FLEXIBLE HOSE A UNIT AXW002D6RU00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C24 HOSE BAND AXW02457EC00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C25 TUB C UNIT AXW012U6ZR0E 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 C26 TUB B UNIT AXW012T7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C27 FILTER B UNIT AXW003W7LG00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C28 BALANCE WEIGHT AXW12317LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C29 OUTER TUB B AXW12027BK00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 BAR LEB UAEPGF LIB Screws MODEL REF. NO. PART NAME SPECIAL TAPPING SCREW PART NO. SAFETY F80H2 F90H2 COUNTRY / Q’TY TH VIET SINMAL INDIA DBD SINRBD PHI UAEKUW OMAN QAT AFP REMARK XTWAXW529 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 TUB A ~ TUB D XTBAXW453 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 TUB A ~ TUB C XTN4+8HFJ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EARTH U ~ BODY A XTN4+8HFJ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EARTH U ~ OUTER TUB B SPECIAL SMALL SCREW XSSAXW682 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PULSATOR UNIT SPECIAL BOLT XVGAXW703J 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MOTOR PULLEY XVGAXW839J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 MOTOR XVGAXW812J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 MECHA CASE ~ OUTER TUB B XTWAXW6517J 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 OUTER TUB A, B XTWAXW6517J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 SPINNER PLATE B XTWAXW6518J 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 GEARED MOTOR (CLUTCH) XTWAXW435 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 OUTER TUB COVER XTWAXW6517J 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 VALVE UNIT PAN HEAD TAPPING SCREW SPECIAL TAPPING SCREW - 26 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.7 Parts Exploded View : Packing Part 7 8 6 12 5 9 1 3 2 10 11 4 - 27 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.8.1 Replacement Parts List : Packing of NA-F78B2 / NA-F80B2 / NA-F90B2 / NA-F1002B Parts List MODEL REF. NO. 1 PART NAME PROTECTION CASE A PART NO. AXW90017LE00 SAFETY COUNTRY / Q’TY F78B2 F80B2 F90B2 F1002B TH INDO VIET MAL INDIA SIN- SINDBD RBD PHI UAEKUW OMAN QAT AFP BAR LEB UAEPGF LIB REMARK 1 AXW90017LE50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 CORNER CUSHION (F-SIDE) AXW90157JP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SET CORNER CUSHION (B-SIDE) AXW90157JP50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SET 3 CORNER PAD AXW90167JP00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 PROTECTION CASE B UNIT AXW090B7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 POLYETHYLENE COVER AXW90607JP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 OPERATING INSTRUCTION AXW99017LF00 1 1 1 1 1 1 1 1 1 1 1 1 1 2 AXW99017LF50 AXW99017LFA0 1 AXW99017LFF0 1 AXW99017LFK0 AXW99017RN00 1 7 SPIN TUB SUPPORTER AXW90857LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 ACCESSORY BAG AXW90576UP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9 BODY COVER AXW90047LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 STOCK CARD AXW99187LF00 1 AXW99187LJ00 1 1 1 1 1 1 1 1 1 AXW99187RN00 1 AXW99187LF50 1 AXW99187LJ50 1 AXW99187RP00 1 AXW99187LFA0 1 AXW99187LJA0 1 AXW99187LJF0 1 AXW99187LFK0 1 AXW99187LJK0 1 AXW99187LFP0 1 AXW99187LJP0 1 AXW99187LJU0 1 AXW99187LJX0 AXW99187LJZ0 11 CASE PLATE A AXW91187LF00 2 AXW91187LJ00 2 AXW91187RN00 FLEXIBLE HOSE B UNIT AXW002E6XB00 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 AXW91187RP00 12 2 2 1 1 1 - 28 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B 10.8.2 Replacemen4 Parts List : Packing of NA-F80H2 / NA-F90H2 Parts List MODEL REF. NO. 1 PART NAME PROTECTION CASE A PART NO. AXW90017LE00 SAFETY F80H2 F90H2 COUNTRY / Q’TY TH VIET SINMAL INDIA DBD SINRBD PHI UAEKUW OMAN QAT AFP BAR LEB UAEPGF LIB 1 REMARK 1 AXW90017LE50 1 1 1 1 1 1 1 1 1 1 1 1 1 CORNER CUSHION (F-SIDE) AXW90157JP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SET CORNER CUSHION (B-SIDE) AXW90157JP50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SET 3 CORNER PAD AXW90167JP00 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 PROTECTION CASE B UNIT AXW090B7LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 POLYETHYLENE COVER AXW90607JP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 OPERATING INSTRUCTION AXW99017LE00 1 1 1 1 1 1 2 AXW99017LE50 1 AXW99017LEA0 1 AXW99017LEF0 1 1 1 1 1 1 1 7 SPIN TUB SUPPORTER AXW90857LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 ACCESSORY BAG AXW90576UP00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9 BODY COVER AXW90047LE00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 STOCK CARD AXW99187LE00 1 1 1 1 1 1 1 AXW99017LEK0 AXW99187LE50 1 AXW99187LG50 1 1 AXW99187LEA0 1 AXW99187LEF0 1 AXW99187LGK0 1 AXW99187LEP0 1 AXW99187LEU0 AXW99187LEX0 1 1 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 AXW99187LEZ0 11 CASE PLATE A AXW91187LE00 2 FLEXIBLE HOSE B UNIT AXW002E6XB00 2 2 2 AXW91187LG00 12 2 1 1 2 1 1 1 - 29 - NA-F78B2 / F80B2 / F80H2 / F90B2 / F90H2 / F1002B DETAIL CHANGE NOTICE REVISION ITEM NO. PAGE OCT. 2011 1 21 ADD. NEW PICTURE AT B22, C24 DETAIL ADD. FLEXIBLE HOSE B UNIT, HOSE BAND 2 22, 23 ADD. PART NAME AND PART NO. FOR FLEXIBLE HOSE B UNIT 3 24 ADD. NEW PICTURE AT C22-1 ADD. BALANCER UNIT 4 25, 26 ADD. PART NAME AND PART NO. FOR BALANCER UNIT - 30 - REMARK