Download chapter 01

Chapter 01 – INTRODUCTION
1
INTRODUCTION
1.1 THE AIM OF THE TECHNICAL MANUAL
This manual has been written in order to supply the technical staff, the persons who are responsible
for the maintenance and for resolving instrument failures, a complete and detailed guide of the
Liasys analyzer, in accordanance with the standard UNI EN591 (which requires a manual to be
supplied with vitro diagnostic instruments for professional use).
1.1.2 MANUAL OUTLINE
The technical manual is composed of 10 chapters that not only describe the operative technical
characteristics of the system, but also the reparation and maintenance procedures to use for the
modules that they are composed of.
.
Chapter 1
INTRODUCTION
The manual structure is described, and recommendations are given regarding the general
use of the analyzer. The technical characteristics of the operative system are given in this
chapter.
.
Chapter 2
DESCRIPTION OF THE SYSTEM
Describes the system, in particular, the analytical cycle of the single modules and
electronic boards.
.
Chapter 3
INSTALLATION
Describes the unpacking procedures and the required characteristics for the place of
installation.
.
Chapter 4
ELECTRONICS SCHEMES AND DESIGNS
Gives the electronics schemes and assembly designs of the electronics board and the
assembly designs of the modules that the system is composed of.
.
Chapter 5
DIAGNOSTIC PROGRAM
Describes the folders in the Diagnostic Program that are responsible for the checks and the
calibration of the modules in the system.
Liasys
Service Manual
Rev. 05
10 February 2004
Page 2