1
Download mechanical
Transcript
SEWING MACHINE DiV,20 MODEL385.18630890 MECHANICAL ADJUSTMENT DISTRIBUTION OF NEEDLE SWING TO I t CHECK: SETTHE STITCHWIDTH DIAL TO" 0" AND THE STITCHSELECTORAT , 2, RAISE THE NEEDLE TO ITS HIGHEST POSITION. 3, DROP THE FEEDDOGS, 4. PLACE A PIECE OF PAPER ON THE NEEDLE PLATEAND LOWER THE PRESSERFOOT, 5_ LOWER THE NEEDLE TO MARK NEEDLE POINT (A) ON A PIECE OF PAPER BY TURNING HAND WHEEL, 6. RAISE THE NEEDLE TO ITS HIGHEST POSITION 7, TURN THE STITCHWIDTH DIAL TO 6,5, 8. LOWER THE NEEDLE TO MARK NEEDLE POINTS (B) AND 9 THE DISTANCE BETWEEN A-8 AND A-C SHOULD BE EQUAL. PAPER BY TURNING THE HAND WHEEL, [_ SELECTED PATTERN WIDTH STITCH WIDTH DIAL BAC 16 (C) ON THE PIECE OF
