Download to open the 2015/2016 Part Catalog

Please note: Because of unexpected increases in manufacturing costs, current catalog prices are
subject to change and without notice, however, we always confirm current prices for
every order.
We appreciate your order.
A-1 Jukebox & Nostalgia, Inc.
Prices are Current as of April 6, 2015
AMi
AMi Singing Towers of 1940 – 1942 (20 Selections)
A-1 PART #
80-155 Service & parts manual for AMi Singing Towers, 50 pages, order R-409
42-001 Mirrors, Beveled, for front of cabinet, Upper, AMi # AST-6108, 4” wide by
6 5/8” high and Lower, AMi # AST-6109, 4” wide by 17 5/8” high, 2 pc. set
$34.50
55.00
AMi A of 1946 – 1947 (40 Selections)
A-1 PART #
80-001 Service & parts manual for AMi Models A and B, 22 pages, order R-185
01-003 Plastics, for upper cabinet, pre-tested for perfect fit, (Available in 4 piece
sets only), (This 4 piece set is not discountable), add up to $40. for shipping,
handling and extra insurance, depending on the ship-to zip code
01-002 Fluted plastics, lower cabinet, pre-tested for perfect fit, (Available in
pairs only), (This 2 piece set is not discountable)
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
01-006 Plastic instruction panel, printed, (this panel is used only if the front door
was constructed with rivets), Includes rivets, (18” W X 13 ½ “ H)
76-080 Key for Original lock for front Mask assembly, (not cash door), Bell Lock # 50A
01-007 Mirror for back door, 3 color printed, (AMI GIVES YOU 40 SELECTIONS)
01-008 Mounting blocks for mirror, wooden, w/4 screws, sold in pairs only, per pair
85-014 Conversion Ring, blue, plastic, flexes to hold a 45 R.P.M. record,
(This item is out of stock until further notice), each
01-016 Coin reject button, chrome plated metal
85-001 Color sheets, lower, Stationary – no animation, (6 ½” W X 15” H), pair
85-002 Color sheets, lower, for original animation, (16” X 16”), pair
$22.50
450.00
265.00
9.00
48.00
20.00
50.00
20.00
8.00
25.00
18.00
28.00
85-017 Motor 20 R.P.M., for left side animation, drive pinion not included, (1)
85-025 Motor 20 R.P.M., for right side animation, drive pinion not included, (1)
35.00
35.00
85-018 Drive Pinion, mounts on lower animation motor, turns color cylinder, ea.
01-009 Cash bag, (duck cloth, as original), hand made in the U.S.A.
01-010 Jewel set, (16 pieces faceted on top, flat on bottom, with layout diagram),
(This item is out of stock until further notice), each
15.00
12.00
01-012 Jewel casting, aluminum, rough finish, (limited quantity)
01-013 Wood panel for mounting jewel casting, original shape,
(This Wood panel does not fit all AMi A models), solid walnut
01-014 Bulb, Incandescent, 40 watt, 10 ½” clear glass, for behind jewels
70-015 Fluorescent lamp 15 watt 18” T12 CW with colored sleeve & two sleeve
caps, (Specify: sleeve color yellow, red, blue, green or pink), each
85-029 Colored sleeve, yellow, & two sleeve caps, for 18” T12 fluorescent lamp
85-032 Colored sleeve, red, & two sleeve caps, for 18” T12 fluorescent lamp
85-033 Colored sleeve, blue, & two sleeve caps, for 18” T12 fluorescent lamp
-5-
70.00
100.00
75.00
12.00
14.00
5.00
5.00
5.00
AMi A of 1946 – 1947 (40 Selections) (Continued)
A-1 PART #
85-034 Colored sleeve, green, & two sleeve caps, for 18” T12 fluorescent lamp
85-036 Colored sleeve, pink, & two sleeve caps, for 18” T12 fluorescent lamp
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
70-016 Fluorescent lamp 14 watt 15" T12 cool-white, (2 required), ea.
70-017 Fluorescent lamp 15 watt 18" T12 CW, (6 CW or daylight required), ea.
70-018 Fluorescent lamp 15 watt 18" T12, daylight, (6 daylight or CW required), ea.
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-021 Ballast, Double 20 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
68-097 Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
$5.00
5.00
1.85
10.00
10.00
10.00
15.00
45.00
1.75
6.50
12.00
7.50
8.25
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
AMi B of 1948 – 1949 (40 Selections)
A-1 PART #
80-001
02-002
02-003
02-004
76-080
85-014
85-039
85-004
85-005
85-015
Service & parts manual for AMi Models A and B, 22 pages, order R-185
Vision panels with curved gold stripe, sold in pairs only, per pair
Fluted plastics, lower cabinet, sold in pairs only, per pair
Program and Instruction glass, 3 color printed, (10" W X 13 7/8” H)
Key for Original lock for front Program door, (not cash door), Bell Lock # 50A
Conversion Ring, blue, plastic, flexes to hold a 45 R.P.M. record,
(This item is out of stock until further notice), each
Color sheet, upper, original stripe pattern, (11” X 22 ½”), (1)
Color sheets, lower animation, original stripe pattern, (11” x 22 ½”), pair
Color sheets, original stripe pattern, (11” X 22 ½”), 1 upper & 2 lower, (Save 15%)
End caps for animation color sheets, stainless steel, each cap,
(This item is out of stock at this time)
$22.50
165.00
260.00
50.00
20.00
8.00
14.00
28.00
35.50
7.00
85-026 Motor 20 R.P.M., for upper animation, drive pinion not included, (1)
85-017 Motor 20 R.P.M., for left side animation, drive pinion not included, (1)
85-025 Motor 20 R.P.M., for right side animation, drive pinion not included, (1)
35.00
35.00
35.00
85-018
85-029
70-002
70-017
70-018
70-006
70-007
71-005
71-001
71-028
15.00
5.00
8.00
10.00
10.00
10.00
10.00
18.00
15.00
78-015
71-016
71-040
68-097
Drive Pinion, mounts on all 3 animation motors, turns color cylinders, ea.
Colored sleeve, yellow, & two sleeve caps, for 18” T12 fluorescent lamp
Fluorescent lamp 8 watt 12” T5, cool-white (program lamp)
Fluorescent lamp 15 watt 18" T12 CW, (2 CW or daylight required), ea.
Fluorescent lamp 15 watt 18" T12, daylight, (2 daylight or CW required), ea.
Fluorescent lamp 20 watt 24" T12, CW, (1 CW or daylight required), ea.
Fluorescent lamp 20 watt 24" T12, daylight, (1 daylight or CW required), ea.
Ballast 4 to 8 watt T5, for 1 lamp, new square style, clamped core, each
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
-6-
1.75
6.50
12.00
7.50
8.25
AMi C of 1950 – 1951 (40 Selections)
A-1 PART #
80-002
03-002
03-001
03-004
03-003
03-005
66-001
76-080
03-008
03-007
03-006
85-014
03-010
85-006
85-040
85-007
85-015
Service & parts manual, AMi Model C, 76 pages, order R-216
Center cabinet panels, curved, clear plastic, pair
Center cabinet panel, curved, clear plastic, each
Lower cabinet panels, curved, white plastic, pair
Lower cabinet panel, curved, white plastic, each
Special! Purchase 2 Center clear & 2 Lower white,
(No additional discount at this Special price), 4 piece set
Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
Key for Original lock for front door assembly, (not cash door), Bell Lock # 50A
Grill panel and first grill louver, for front door, large formed plastic
Grill louvers, for front door, original shape and color, 11 piece set
Grill louver, for front door, original shape and color, each
Conversion Ring, blue, plastic, flexes to hold a 45 R.P.M. record,
(This item is out of stock until further notice), each
Coins glass, 3 colors, one play 5¢, two plays 10¢, six plays Quarter
Color sheet, for mirror light box, (30” X 4 ½”), (1)
Color sheets, lower animation, match original stripe, (11 X 22 ½”), pair
Color sheets, 1 mirror light box & 2 lower animation, 3 pc. set, (Save 15%)
End caps for animation color sheets, stainless steel, each cap,
(This item is out of stock at this time)
$35.00
80.00
45.00
100.00
55.00
170.00
9.00
20.00
40.00
150.00
16.00
8.00
15.00
18.00
28.00
39.00
7.00
85-017 Motor 20 R.P.M., for left side animation, drive pinion not included, (1)
85-025 Motor 20 R.P.M., for right side animation, drive pinion not included, (1)
35.00
35.00
85-018
70-017
70-018
70-006
70-007
71-001
71-028
15.00
10.00
10.00
10.00
10.00
15.00
78-015
71-016
71-040
68-097
Drive Pinion, mounts on lower animation motor, turns color cylinder, each
Fluorescent lamp 15 watt 18" T12 cool-white
Fluorescent lamp 15 watt 18" T12, daylight
Fluorescent lamp 20 watt 24" T12, cool-white
Fluorescent lamp 20 watt 24" T12, daylight
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
1.75
6.50
12.00
7.50
8.25
AMi D 40 (40 Selections) and D 80 (80 Selections) of 1951-1952
A-1 PART #
80-003
80-004
04-003
66-001
Service, Parts & Trouble Shooting, AMi D-40, 88 pages, order R-270
Service, Parts & Trouble Shooting, AMi D-80, 94 pages, order R-264
Dome Decal (AMi 80 Selections)
Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
85-030 Drive belt for turntable, AMi # F-2143, (larger), for D 80, E 80 & E 120 only
85-031 Drive belt for turntable, AMi # F-2155, (smaller), for D 80, E 80 & E 120 only
85-014 Conversion Ring, blue, plastic, flexes to hold a 45 R.P.M. record,
(This item is out of stock until further notice), each
(Ami D 40 and D 80 parts are continued on the next page)
-7-
$37.00
37.00
14.00
9.00
6.00
6.00
8.00
AMi D 40 and D 80 of 1951-1952 (Continued)
A-1 PART #
85-008 Color sheet, upper animation, original pattern – 20 stripes, (22” X 11”), (1)
85-009 Color sheets, for D 40, D 80, E 80 and E 120, lower animation,
matches original pattern, (11” X 16”), pair
85-010 Color sheets, animation, 1 upper & 2 lower, 3 piece set, (Save $5.00)
85-015 End caps for animation color sheets, stainless steel, each cap,
(This item is out of stock at this time)
$15.00
24.00
34.00
7.00
85-016 End cap with rocker stud, for upper animation color sheet, (1)
(This item is out of stock at this time)
10.00
85-026 Motor 20 R.P.M., for upper animation, rocker arm not included, (1)
85-017 Motor 20 R.P.M., for left side animation, drive pinion not included, (1)
85-025 Motor 20 R.P.M., for right side animation, drive pinion not included, (1)
35.00
35.00
35.00
85-018
70-017
70-018
70-006
70-007
71-001
71-028
15.00
10.00
10.00
10.00
10.00
15.00
78-015
71-016
71-040
68-097
Drive Pinion, mounts on lower animation motor, turns color cylinder, ea.
Fluorescent lamp 15 watt 18" T12 CW, (2 CW or daylight required), ea.
Fluorescent lamp 15 watt 18" T12, daylight, (2 daylight or CW required), ea.
Fluorescent lamp 20 watt 24" T12, CW, (1 CW or daylight required), ea.
Fluorescent lamp 20 watt 24" T12, daylight, (1 daylight or CW required, ea.
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
1.75
6.50
12.00
7.50
8.25
AMi E Series of 1953 (40-80-120 Selections)
A-1 PART #
80-005
80-091
80-092
80-093
05-001
05-002
66-001
83-048
85-030
85-031
85-011
85-009
85-019
85-015
Service & parts manual, AMi E-40, E-80 & E-120, 90 pages, order R-160
Service & parts manual, AMi F-40, F-80 & F-120, 122 pages, order R-183
Quick reference guide & operators manual AMi F Series, 24 pgs., order R-302
AMi F Series, purchase R-183 and R-302, save $10.00, order R-183-A
Plastic front window, curved, printed, E-80 only, (27 7/8” W X 15 ¼“ H),
Please Note: Same catalog price since 1999, (This item is not discountable)
Side panel, clear plastic, E-80 only, each
Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
Drive belt for turntable, AMi # F-2143, (larger), for D 80, E 80 & E 120 only
Drive belt for turntable, AMi # F-2155, (smaller), for D 80, E 80 & E 120 only
Color sheet, upper animation, E-120, NEW pattern, Wider stripes produce
more color, (30” X 10”), can be used for E-80 if width of sheet is trimmed, (1)
Color sheets, for D 40, D 80, E 80 and E 120, lower animation,
matches original pattern, (11” X 16”), per pair
Color sheets, animation, E-80 & E-120, 1 upper & 2 lower,
(Save $6.00 off the individual piece price), 3 piece set
End caps for animation color sheets, stainless steel, each cap,
(This item is out of stock at this time)
85-016 End cap with rocker stud, for upper animation color sheet, (1)
(This item is out of stock at this time)
-8-
$37.00
45.00
18.00
53.00
99.00
18.00
9.00
6.00
6.00
6.00
24.00
24.00
42.00
7.00
10.00
AMi E Series of 1953 (Continued)
A-1 PART #
85-026 Motor 20 R.P.M., for upper animation, rocker arm not included, (1)
85-017 Motor 20 R.P.M., for left side animation, drive pinion not included, (1)
85-025 Motor 20 R.P.M., for right side animation, drive pinion not included, (1)
85-018
70-017
70-018
70-006
70-007
71-001
71-028
78-015
71-016
71-040
68-097
Drive Pinion, mounts on lower animation motor, turns color cylinder, ea.
Fluorescent lamp 15 watt 18" T12 cool-white
Fluorescent lamp 15 watt 18" T12, daylight
Fluorescent lamp 20 watt 24" T12, cool-white
Fluorescent lamp 20 watt 24" T12, daylight
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
$35.00
35.00
35.00
15.00
10.00
10.00
10.00
10.00
15.00
1.75
6.50
12.00
7.50
8.25
AMi H of 1957 and I of 1958 (100-120-200 Selections)
A-1 PART #
80-006
80-007
80-008
80-009
80-010
80-011
80-094
83-048
78-015
71-016
71-040
68-097
Service manual AMi Model H series, 118 pages, order R-396
Service manual AMi H & i credit/selection system, 18 pgs., order R-397
AMi Model H, Purchase R-396 & R-397, save $5.00, order R-397-A
Service manual AMi Model i series, 140 pages, order R-528
Parts catalog AMi Model i series, 100 pages, order R-529
AMi Model i, purchase R-528 and R-529, save $10.00, order R-528A
Service bulletins for AMi Models: G, H & i, 65 pages, order R-16
Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
Key for cabinet for Ami Models: G, H & i, key # R1303
AMi Model H Color Sheet, original pattern, gives color to front grill (26” X 6”)
Fluorescent lamp 20 watt 24" T12, cool-white
Fluorescent lamp 20 watt 24" T12, daylight
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
76-023
85-012
70-006
70-007
71-001
71-028
$40.00
15.00
50.00
45.00
38.00
73.00
30.00
6.00
8.00
16.00
10.00
10.00
15.00
1.75
6.50
12.00
7.50
8.25
AMi LYRIC of 1961 50 Records (100 Selections)
and CONTINENTAL 1 of 1961 100 Records (200 Selections)
A-1 PART #
80-012 Service Manual for AMi Continental 2, (use this manual for
AMi Lyric & AMi Continental I), 126 pages, order R-375
80-013 Cabinet & Component parts, for AMi Lyric & Cont. I, 33 pages, order R-63
80-014 Service bulletins, remote controls, wall boxes & accessories,
for AMi K, Lyric, Continental I and 2, 60 pages, order manual # R-531
85-035 Record changer trim, (mech. shroud), & plug-button, (for Cont. I & 2 only)
-9-
$42.00
25.00
30.00
90.00
AMi LYRIC of 1961 50 Records (100 Selections) and
CONTINENTAL 1 of 1961 100 Records (200 Selections) (Continued)
A-1 PART #
83-048 Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
07-003 Credit glass, original aqua color, round, glass, not plastic
07-008 Price card, aqua background, standard plays 5¢ 1, 10¢ 2 & quarter 5
07-009 Price card, aqua background, dime/two nickels 1, quarter 3 & half dollar 6
07-010 Price card, aqua background, dime/two nickels 1, quarter 4 & half dollar 8
07-011 Price card, aqua background, standard plays: dime/two nickels 1, quarter 3
& half dollar 7 and extended plays: fifteen cents 1, quarter 2 & half dollar 5
07-012 Operator’s card, # F-5981, Music for You by AMi, Operated For Your
Pleasure By, (Lime green background, 3 5/16” by 1 3/4", as original)
07-005 Program title headings, aqua: hit tunes, rock and roll, oldies, etc., 24 pc. set
75-003 Pickering magnetic Cartridge & needle, NP/AC, excellent replacement
07-002 Letters/numbers glass for selection buttons, 3 pc. set, (original aqua color)
07-001 Diffuser above grill, original shape, (multicolored for Cont. I & Lyric Models)
76-022 Key for cabinet, arch & back door, (not cash door), C440A
85-020 Cash door, superior Burch covered plywood, with metal reinforcement plates,
for AMi models J, K, Continental 1, Continental 2, Lyric, L, M and N
85-021 Access door, (covers coin acceptor), superior Burch covered plywood, with
metal reinforcement plates, AMi Models: J, K, Cont. 1 & 2, Lyric, L, M & N
76-065 Lock, 7/8” quality lock, & 2 keys for AMi, Reproduction – wooden, cash door
76-070 Lock, 7/8” quality lock, hardware, & 2 keys for AMi, Original, metal, cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
72-004 Bulb, miniature #47 (pilot bulb and credit bulbs), each
72-005 Bulb, miniature #1847 (manuals call for this longer lasting bulb), each
70-002 Fluorescent lamp 8 Watt 12" T5 cool-white, illuminates title strips, (2), each
70-006 Fluorescent lamp 20 watt 24" T12, cool-white, for front, (1)
70-007 Fluorescent lamp 20 watt 24" T12, daylight, (optional color), for front
71-005 Ballast 4 to 8 watt T5, for 1 lamp, new square style, clamped core, each
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
68-097 Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
$6.00
15.00
5.00
5.00
5.00
5.00
4.00
18.00
80.00
38.00
30.00
8.00
18.00
19.50
12.00
12.00
4.00
1.00
1.50
8.00
10.00
10.00
18.00
15.00
1.75
6.50
12.00
7.50
8.25
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
AMi CONTINENTAL 2 of 1962 (100 and 200 Selections)
A-1 PART #
80-012
80-016
80-017
80-014
85-035
83-048
08-007
08-009
08-027
08-028
Service manual, AMi Cont. 2, 100 & 200 Models, 126 pages, order R-375
Parts catalog, AMi Continental 2, 92 pages, order R-373
AMi Continental 2, purchase R-375 and R-373, save $8.00, order R-375A
Service bulletins, remote controls, wall boxes & accessories,
for AMi K, Lyric, Continental I and 2, 60 pages, order manual # R-531
Record changer trim, (mech. shroud), & plug-button, (for Cont. I & 2 only)
Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
Credit glass, original red color, round, glass, not plastic
Price card, (as original), red print on white background
Price card, red background, standard plays 5¢ 1, 10¢ 2 & quarter 5
Price card, red background, dime/two nickels 1, quarter 3 & half dollar 6
- 10 -
$42.00
35.00
69.00
30.00
90.00
6.00
15.00
7.00
5.00
5.00
AMi CONTINENTAL 2 of 1962 (100 and 200 Selections) (Continued)
A-1 PART #
08-029 Price card, red background, dime/two nickels 1, quarter 4 & half dollar 8
08-030 Price card, red background, standard plays: dime/two nickels 1, quarter 3
& half dollar 7 and extended plays: fifteen cents 1, quarter 2 & half dollar 5
08-010 33/45 Automix card, (as original), red & black print on white background
08-011 Star & dots card, replaces automix card, red & black print on white background
08-035 Operator’s card, # F-5981, Music for You by AMi, Operated For Your
Pleasure By, (Salmon-red background, 3 5/16” by 1 3/4", as original)
08-013 Program title headings, red: hit tunes, rock and roll, oldies, etc., 24 pc. set
75-003 Pickering magnetic Cartridge & needle, NP/AC, excellent replacement
08-006 Letters/numbers glass for selection buttons, 3 pc. set, (original red color)
08-001 Front Glass, (Continental 2, printed in script as original)
08-002 Front multi-colored red/orange printed plastic, (w/ 3 holes for AMi logo only)
08-003 Front multi-colored red/orange printed plastic, (with 3 holes for AMi logo
and 24 additional holes) for “STEREO – ROUND”
08-025 Logo & STEREO ROUND Letters for front printed plastic,
(For A-1 # 08-003), (This item is unavailable until further notice)
08-004 Diffuser above grill, original shape and colors, (red & clear)
76-022 Key for cabinet, arch & back door, (not cash door), C440A
85-020 Cash door, superior Burch covered plywood, with metal reinforcement plates,
for AMi models J, K, Continental 1, Continental 2, Lyric, L, M and N
85-021 Access door, (covers coin acceptor), superior Burch covered plywood, with
metal reinforcement plates, AMi Models: J, K, Cont. 1 & 2, Lyric, L, M & N
76-065 Lock, 7/8” quality lock, & 2 keys for AMi, Reproduction – wooden, cash door
76-070 Lock, 7/8” quality lock, hardware, & 2 keys for AMi, Original, metal, cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
72-004 Bulb, miniature #47 (pilot bulb and credit bulbs), each
72-005 Bulb, miniature #1847 (manuals call for this longer lasting bulb), each
70-001 Fluorescent lamp 6 Watt 9" T5 cool-white, lights record magazine, (2), each
70-002 Fluorescent lamp 8 Watt 12" T5 cool-white, lights title strips, (2), each
70-006 Fluorescent lamp 20 watt 24" T12, cool-white, lights front glass, (1)
70-007 Fluorescent lamp 20 watt 24" T12, daylight, (optional color), for front
71-005 Ballast 4 to 8 watt T5, for 1 lamp, new square style, clamped core, each
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
68-097 Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
$5.00
5.00
7.00
7.00
4.00
18.00
80.00
38.00
68.50
60.00
65.00
60.00
20.00
8.00
18.00
19.50
12.00
12.00
4.00
1.00
1.50
8.00
8.00
10.00
10.00
18.00
15.00
1.75
6.50
12.00
7.50
8.25
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
AMi: MM6, Ti-1, Ti-2, Ri-1, R74 and R80
A-1 PART #
83-048 Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
76-082 Key, for MM6, Ti-1, Ti-2, Ri-1, R74 and R80 if 256A is stamped
on the face of the lock, (key # C256A), ea.
- 11 -
$6.00
7.00
AMi KEYS (For Original Locks), for cabinet sides and
Models with back doors, (not for cash door locks)
FOR MODEL
KEY #
PRICE
50A
$20.00
50A
20.00
50A
R1303
20.00
8.00
C440A
8.00
A-1 PART #
76-080 AMi model A, key for Original lock for front Mask assembly,
(not for the cash door), Bell Lock number
76-080 AMi model B, key for Original lock for front Program door,
(not for the cash door), Bell Lock number
76-080 AMi model C, key for Original lock for front door assembly,
(not cash door), Bell Lock number
76-023 Ami models: G, H & i, key for cabinet, (not cash box)
76-022 AMi models: Lyric, Continental 1 & Continental 2, key for cabinet,
arch & back door, (not for the cash door)
FOR AMi & ROWE, (Sometimes referred to as Rowe – AMi),
WE STOCK: SERVICE MANUALS, TROUBLE SHOOTING GUIDES,
PARTS LISTS, MINI BULBS, CARTRIDGES, STYLI – (NEEDLES) and
FLUORESCENT LAMPS, Please Call or Email for details and pricing.
PACKARD
PACKARD Pla-Mor Model 7 of 1946 – 1949 (24 Selections)
A-1 PART #
80-096 Installation & service manual, Pla-Mor Model 7, 30 pages, order R-164
80-097 Sale ads for Pla-Mor, Manhattan & remote equipment and
articles about the Packard Corporation, 48 pages, order R-242
80-098 Service manual for wallbox for Pla-Mor & Manhattan, 8 pages, order R-90
09-001 Plastic curtains for mechanism area, for “Pla-Mor” Model 7 only,
original printed pattern, (original plastic curtains are usually
discolored or missing), (This set is not discountable), 4 piece set
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
$25.00
27.00
14.00
140.00
6.50
7.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
ROCK-OLA
ROCK-OLA 1422 of 1946, 1426 of 1947 and 1428 of 1948 – 1949
(20 Selections)
A-1 PART #
80-018
80-019
80-020
72-014
72-017
78-015
71-040
68-097
Service & parts manual for 1422 through 1428, 31 pages, order R-229
Trouble shooting guide for 1422 through 1428, 32 pages, order R-214
Rock-Ola 1422 thru 1428, purchase R-229 & R-214, save $8.00, order R-229A
Bulb, miniature #313, 28 volt, (Use bulb # 1819, A-1 Part # 72-017,
for Rock-Ola 1422, 1426 and 1428 Thank You lamp), each
Bulb, miniature #1819, 28 volt, (replaces bulb #313), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
Parts for Rock-Ola Jukeboxes are continued on the next page
- 12 -
$29.00
29.00
50.00
2.00
2.00
6.50
7.50
8.25
ROCK-OLA 1432 THROUGH 1475
A-1 PART #
80-140
80-141
80-142
80-143
80-144
80-145
80-146
80-135
80-136
80-137
80-147
80-148
80-149
80-150
80-151
80-152
83-048
68-028
68-029
68-031
91-001
91-002
Service and parts manual, Rock-Ola 1432, 80 pages, order R-318
Service and parts manual, Rock-Ola 1434, 65 pages, order R-319
Service and parts manual, Rock-Ola 1436, 45 pages, order R-194
Service and parts manual, Rock-Ola 1436A, 43 pages, order R-215
Service and parts manual, Rock-Ola 1438, 38 pages, order R-169
Service and parts manual, Rock-Ola 1442, 40 pages, order R-315
Service and parts manual, Rock-Ola 1446, 40 pages, order R-312
Service & parts manual, Rock-Ola 1448, 48 pages, order R-171
Service & parts manual, Rock-Ola 1452, 40 pages, order R-279
Service & parts manual, Rock-Ola 1454, 46 pages, order R-280
Service manual, Rock-Ola 1455 Standard & Deluxe, 40 pgs., order R-241
Parts manual, Rock-Ola 1455 Standard & Deluxe, 35 pgs., order R-525
Service & Parts, 2 manuals, Rock-Ola 1455 Standard & Deluxe, order R-241A
Service and parts manual, Rock-Ola 1468, 66 pages, order R-322
Manual, defines Stereophonic sound, has schematics & parts list,
Rock-Ola’s: 1460, 1468 and 1475-ST, 20 pgs., order R-316
Service and parts manual, Rock-Ola 1475, 64 pages, order R-174
Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
Grill frame, front piece, (for waffle glass), polished stainless steel, each
Grill frame, rear piece, (for waffle glass), polished stainless steel, each
Grill frames, front & rear, (for waffle glass), polished stainless, 8 piece set
Volume control pot. for Rock-Ola Models 1446 through 1475 (mono. only)
Volume control pot., (Stereo), Models 1460 through 437
and some Seeburg models, (This item is out of stock at this time)
55-009 Motor Brush for Gripper & Magazine motors, Rock-Ola # 31493,
for Rock-Ola Models: 1468 through 476, (2 required), each
$40.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
37.00
64.00
38.00
22.00
38.00
6.00
10.00
10.00
70.00
40.00
40.00
14.00
76-042 Key for Rock-Ola models 1432, 1434, 1436, 1438, 1442, 1446, 1448, 1452 and
1454, this key fits the cabinet locks, it does not fit the cash box door, F593 key
7.00
76-078 Key for Rock-Ola models 1455, 1458, 1462, 1464, 1465, 1468, 1475, 1478,
1485, 1488, 1495, 1496, 1497 and all models from 435 through 460, this key
fits the cabinet locks, it does not fit the lock on the cash box door, F592 key
7.00
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
68-097 Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
6.50
7.50
8.25
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
ROCK-OLA 1493 “PRINCESS” of 1962 50 Records (100 Selections)
A-1 PART #
80-021 Service & parts manual, Rock-Ola 1493, 80 pages, order R-269
11-002 Rear backdrop curtain, for inside cabinet, behind mechanism,
original pattern – white with purple stripe
11-001 Coin PRICES glass, HALF DOLLAR 7, QUARTER 3, DIME OR 2 NICKELS 1 PLAY
83-048 Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
55-002 Grommets for turntable motor for all 45 R.P.M. Rock-Ola's, 3 required, each
55-009 Motor Brush for Gripper & Magazine motors, Rock-Ola # 31493, each
76-092 Key for Rock-Ola models 1484, 1493, 1494, 403, 408, 414, 418, 424,
425, 426, 429, 431, 432, 433, & 434, this key fits the cabinet locks,
it does not fit the cash box door, F486 key
11-003 Grill medallion plastic, part # 35704, Crown and R logo, (as original)
- 13 -
$37.00
25.00
9.00
6.00
1.50
14.00
7.00
60.00
ROCK-OLA 1493 “PRINCESS” of 1962 (Continued)
A-1 PART #
91-002 Volume control pot., (Stereo), Models 1460 through 437
and some Seeburg models, (This item is out of stock at this time)
72-030
70-017
70-004
70-018
70-005
70-006
70-007
71-001
71-028
78-015
71-016
71-040
68-097
Bulb, #309, 28 volt, for Rock-Ola 1493 & 440 thru 470, power distribution, ea.
Fluorescent lamp 15 watt 18" T12 cool-white, lights crown and logo, (1)
Fluorescent lamp, 15 watt 18" T8, cool-white, (optional size), replaces T12
Fluorescent lamp 15 watt 18" T12, daylight, (optional color)
Fluorescent lamp, 15 watt 18" T8, daylight, (optional size and color)
Fluorescent lamp, 20 watt 24" T12 cool-white, (upper cabinet), (1)
Fluorescent lamp, 20 watt 24" T12 daylight, (optional color)
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
$40.00
3.50
10.00
8.00
10.00
10.00
10.00
10.00
15.00
1.75
6.50
12.00
7.50
8.25
ROCK-OLA 435 “Princess Deluxe” of 1967 – 68
50 Records (100 Selections)
A-1 PART #
80-099
80-101
80-102
40-001
83-048
Service manual, Rock-Ola 435, 56 pages, order R-415
Parts manual, Rock-Ola 435, 50 pages, order R-485
Rock-Ola 435, Purchase R-415 and R-485, save $6.00, order R-415A
Front door glass, Princess Deluxe, printed, (as original), not discountable
Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
55-002 Grommets for turntable motor for all 45 R.P.M. Rock-Ola's, 3 required, each
55-009 Motor Brush for Gripper & Magazine motors, Rock-Ola # 31493, each
76-078 Key for Rock-Ola models 1455, 1458, 1462, 1464, 1465, 1468, 1475, 1478,
1485, 1488, 1495, 1496, 1497 and all models from 435 through 460, this key
fits the cabinet locks, it does not fit the lock on the cash box door, F592 key
91-002 Volume control pot., (Stereo), Models 1460 through 437
and some Seeburg models, (This item is out of stock at this time)
70-019 Fluorescent lamp 25 watt 30” T12 cool-white, (recommended color)
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
68-097 Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
Parts for Rock-Ola Jukeboxes are continued on the next page
- 14 -
$34.00
28.00
56.00
65.00
6.00
1.50
14.00
7.00
40.00
18.00
18.00
22.50
1.75
6.50
12.00
7.50
8.25
ROCK-OLA 480 – 488 of 1979 – 1982 80 Records (160 Selections)
A-1 PART #
80-110
80-111
41-001
83-048
55-002
72-007
76-075
78-015
71-016
Service manual, Rock-Ola 480 “Techna”, 66 pages, order R-42
Service manual, Rock-Ola 488 “Vista”, 66 pages, order R-17
Instruction glass for 480, 484, 488; add coins, plays, record playing
Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
Grommets for turntable motor for all 45 R.P.M. Rock-Ola's, 3 required, each
Bulb, miniature # 53, 14.4 volt, (Westinghouse), (10% discount for 10 +), each
Key for cabinet, Rock-Ola models: 461 through 498, key # P600
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
$38.00
38.00
20.00
6.00
1.50
1.00
7.00
6.50
12.00
ROCK-OLA KEYS (For Original Locks), for cabinet sides and
Models with back doors, (not for cash door locks)
FOR MODEL
KEY #
PRICE
A-1 PART #
76-042 Key for Rock-Ola models: 1432, 1434, 1436, 1438, 1442, 1446,
1448, 1452 and 1454, (Fits cabinet locks, not the cash box door)
F593
7.00
76-078 Key for Rock-Ola models: 1455, 1458, 1462, 1464, 1465, 1468,
1475, 1478, 1485, 1488, 1495, 1496, 1497 and all models
from 435 through 460, (Fits cabinet locks, not the cash box door)
F592
7.00
76-092 Key for Rock-Ola models: 1484, 1493, 1494, 403, 408, 414, 418,
424, 425, 426, 429, 431, 432, 433, & 434, (Fits cabinet locks,
not the cash box door)
F486
7.00
76-075 Key for Rock-Ola models: 461 through 498, (Fits cabinet locks,
not the cash box door)
P600
7.00
76-076 Key for Rock-Ola models: 2000X through CD models,
(Fits cabinet locks, not the cash box door)
P1200
7.00
FOR ROCK-OLA JUKEBOXES, WE STOCK: SERVICE MANUALS,
TROUBLE SHOOTING GUIDES, PARTS LISTS, MINI BULBS,
CARTRIDGES, STYLI – (NEEDLES) and FLUORESCENT LAMPS
FOR MOST MODELS, Please Call or Email for details and pricing.
SEEBURG
SEEBURG CLASSIC of 1939 (20 Selections)
A-1 PART #
80-106 Schematic diagrams for all 20-selection Seeburg Models from
1938-1949, 95 pages, order R-381
80-103 Service manual for Classic, Vogue, Mayfair, Plaza & Casino,
58 pages, order R-309
80-104 Operation, maintenance and corrective measures for
Classic & Vogue, 16 pgs., order R-86
80-105 Purchase R-309, Service manual & R-86, Operation manual for Classic,
Vogue, Mayfair, Plaza & Casino, save $5.00, order R-309A
12-003 Upper cabinet plastics, red, for Seeburg Classic only,
3 lid pieces and 2 side pieces, (5-piece set)
12-004 Upper cabinet plastics, green for Seeburg Classic only,
3 lid pieces and 2 side pieces, (5-piece set)
- 15 -
$36.00
34.00
16.00
45.00
140.00
140.00
SEEBURG CLASSIC of 1939 (Continued)
A-1 PART #
12-002
73-020
78-015
71-040
Pilaster plastics, Red, for Seeburg Classic only, pair
Plastic panels for front door, original, printed wave pattern, 3 colors, pair
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
$140.00
48.00
6.50
7.50
SEEBURG VOGUE of 1939 (20 Selections)
A-1 PART #
80-106 Schematic diagrams for all 20-selection Seeburg Models from
1938-1949, 95 pages, order R-381
80-103 Service manual for Vogue, Classic, Mayfair, Plaza & Casino,
58 pages, order R-309
80-104 Operation, maintenance and corrective measures for
Classic & Vogue, 16 pgs., order R-86
80-105 Purchase R-309, Service manual & R-86, Operation manual for Classic,
Vogue, Mayfair, Plaza & Casino, save $5.00, order R-309A
73-020 Plastic panels for front door, original, printed wave pattern, 3 colors, pair
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
$36.00
34.00
16.00
45.00
48.00
6.50
7.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG CADET of 1940 (20 Selections)
A-1 PART #
80-106 Schematic diagrams for all 20-selection Seeburg Models from
1938-1949, 95 pages, order R-381
80-107 Service and parts manual for Cadet, Concert Master &
Commander, 132 pages, order R-276
80-108 Operation and maintenance manual for Cadet & Commander,
16 pages, order R-87
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
$36.00
40.00
16.00
3.00
6.50
7.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG ENVOY of 1940 (20 Selections)
A-1 PART #
80-106 Schematic diagrams for all 20-selection Seeburg Models from
1938-1949, 95 pages, order R-381
80-112 Operation and maintenance manual for Envoy, Concert Master,
Colonel & Major, 16 pages, order R-88
14-001 Cabinet lid plastics, Specify: blue, red, green or yellow, 3-piece set
14-002 Pilaster plastics, Red, for Seeburg Envoy only, pair
73-022 Printed plastic set for keyboard area: SEEBURG SELECTRIC SYMPHONOLA,
RECORD PLAYING, PRICING CARD 5 PLAYS 25¢, etc. & DEPOSIT COINS, 4 pcs.
14-003 Upper back door, (add $35.00 for packaging & shipping an oversize box)
14-004 Lower back door, (add $35.00 for packaging & shipping an oversize box)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
- 16 -
$36.00
16.00
70.00
150.00
35.00
85.00
75.00
3.00
6.50
7.50
SEEBURG COLONEL & MAJOR of 1940
and 7800 of 1941 (20 Selections)
A-1 PART #
80-106 Schematic diagrams for all 20-selection Seeburg Models from
1938-1949, 95 pages, order R-381
80-112 Operation and maintenance manual for Colonel, Major,
Envoy & Concert Master, 16 pages, order R-88
80-114 Service and parts manual for 7800 “Standard”, 7850,
8800 “Super” & 9800 “Deluxe”, 90 pages, order R-494
73-022 Printed plastic set for keyboard area: SEEBURG SELECTRIC SYMPHONOLA,
RECORD PLAYING, PRICING CARD 5 PLAYS 25¢, etc. & DEPOSIT COINS, 4 pcs.
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
$36.00
16.00
37.00
35.00
3.00
6.50
7.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG 8800 SUPER and 9800 DELUXE of 1941 (20 Selections)
A-1 PART #
80-106 Schematic diagrams for all 20-selection Seeburg Models from
1938-1949, 95 pages, order R-381
80-114 Service and parts manual for Seeburg 8800 “Super” & 9800 “Deluxe”,
7800 “Standard” & 7850, 90 pages, order R-494
73-023 Printed plastic set: MAKE SELECTION / SELECTION PLAYING and
DEPOSIT COINS BEFORE MAKING SELECTIONS – 1 PLAY 5¢, etc., 2 pieces
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
$36.00
37.00
24.00
3.00
7.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG 146, 147 and 148 of 1946, 1947 and 1948 (20 Selections)
A-1 PART #
80-131
80-132
80-133
38-001
65-002
76-002
76-003
78-015
71-040
Service & parts manual, Seeburg 146, 147 & 148, 320 pgs., order R-265
Trouble Shooting guide, Seeburg 146, 147 & 148, 38 pgs., order R-440
146, 147 & 148, Purchase R-265 & R-440, save $15.00, order R-265A
Mirrors, blue, 270 One-inch squares, for front door
Grill cloth, Specify: gold, red or silver, other colors are listed
on page 86 under GRILL CLOTH, cloth size 30” X 40”, each
Volume control pot. for Models 146, 147, 148, A, B/BL, C, G, W & R
Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
Bulb, miniature #51, 7.5 volt, Seeburg 146/147/148 selection dial &
Seeburg wallboxes (new original Westinghouse, best quality), each
Bulb, miniature #81, Seeburg 146/147/148 behind plastics,
(Special: 10 or more # 81 Bulbs only $1.25 each) or each
Key, New original stock key for Seeburg 146, 147, 148: Lid
L7380
Key, New original stock key for Seeburg 146, 147, 148: Door
L7325
Toggle switch, (Main on-off switch), excellent replacement, for all models
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
91-003
76-001
72-006
72-011
Parts for Seeburg Jukeboxes are continued on the next page
- 17 -
$64.50
26.00
75.50
110.00
18.00
40.00
3.00
1.00
2.00
10.00
10.00
6.50
7.50
SEEBURG PROGRAM TITLE HEADINGS For The Following Seeburg
Models: M100A, M100B, M100BL, M100C, HF100G, W100, HF100R,
100J, 100JL, L100, 101, 161, 201, 220, 222, Q100 and Q160
Note: Seeburg program title heading-sets do not always contain the same
exact variety of headings. Popular headings are duplicated in all sets.
Sets contain: Hit Tunes, Rock & Roll and Old Favorites. Some sets contain:
Rhythm and Blues, Hillbilly, All Time Favorites and Jazz. Some sets contain:
Classics and Varieties, Country and Western and Christmas.
73-070
73-071
73-072
73-073
73-074
73-075
73-078
Seeburg Title headings for program holders, Red, 12 piece assortment
Seeburg Title headings for program holders, Maroon 12 piece assortment
Seeburg Title headings for program holders, Aqua, 12 piece assortment
Seeburg Title headings for program holders, Blue, 12 piece assortment
Seeburg Title headings for program holders, Green, 12 piece assortment
Seeburg Title headings for program holders, Black, 12 piece assortment
Seeburg Title heading: Any one piece, any color, your choice, each
$12.00
12.00
12.00
12.00
12.00
12.00
1.50
Add color to the Program Title Strips and inside of your 1950s & 1960s
Seeburg Models M100A through LPC480. We stock Colored sleeves
that slip over the fluorescent lamps in your jukebox. To create a Rainbow
effect, choose from the following colors:
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
$1.85
70-055 Colored sleeve for T8 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
1.85
SEEBURG M100A of 1948 – 51 50 Records (100 Selections)
A-1 PART #
80-022 Service & parts manual, Seeburg M100A, 160 pages, order R-190
66-003 Decal, water transfer, apply to inside of glass dome facing out,
original wording, colors and font, “Seeburg Select-o-Matic 100”
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
16-001 Side glass, for left or right side of dome, each
16-008 Insert for mechanism cover "100 Select-o-Matic Mechanism", Model M100A only
16-004 Program glass, 36” X 6 ¾”, (unprinted, as original), Model M100A only
16-005 Retainer, (frame), for program glass, Aluminum, 4 pc. set
68-070 Screw kit, stainless, for program-glass retainer & electrical selector, Phillips
head screws, 25 pcs, (13 wood & 12 metal screws, 1 extra of all 4 sizes included)
77-002 Instruction glass, Maroon, (Original Factory Color), Choose either Maroon
or Red, “PRESS ONE LETTER & MAKE SELECTIONS”, 2 piece set
77-060 Instruction glass, Red, (We have had many requests for this color),
“PRESS ONE LETTER & MAKE SELECTIONS”, 2 piece set
16-007 Coin instruction glass (6 plays 25¢, 2 for 10¢, 1 for 5¢)
68-012 Speed washers, hold instruction glass in place, 10 pieces
77-003 Diffuser glass, above Electrical Selector buttons, white with red stripes
77-035 Select glass, green, Models M100A, B, BL and C
77-036 Select glass, blue, Models M100A, B, BL and C
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
- 18 -
$45.95
12.00
9.00
25.00
10.00
25.00
150.00
5.00
16.00
16.00
13.50
3.50
10.00
6.50
6.50
60.00
3.00
SEEBURG M100A of 1948 – 51 (Continued)
A-1 PART #
78-020 Free play adapter, plugs in to existing credit unit, has switch for free play
or coin operation, eliminates latch bar solenoid burn-out, for Seeburg
Models: A, B, BL, C, G, W, R, J and JL, (This item is not discountable)
68-014 Coin reject plunger, (button), plated, with scavenger wire, (Models A, B & C)
83-040 Spring, plunger return, for under coin-reject plunger-button, (Models A, B & C)
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
68-007 Speed washers, round, hold letter/number strips & title headings to program
title holders. Also hold: 2 pc. Inst. glass; SELECT glass & COINS glass, 55 pieces
83-003 Brushes, stylus cleaning, for stripper arms, pair
84-030 Motor coupler, connects mechanism motor to gear,
(replace if rubber is hard), this motor coupler is for the M100A only
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
74-027 Styli, for original Seeburg Blackhead cartridge, (3 mil sapphire tip
for original, shellac 78 rpm records only. Not for Vinyl 78s), per pair
16-006 Mirror for left and right end of mechanism (2), each
16-002 Frosted diffuser glass, 32 ¾” X 8 ¼”, for behind program titles, Etched glass
$78.50
25.00
4.00
12.00
7.00
12.00
50.00
25.00
25.00
15.00
30.00
65-008 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-023 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-008 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-009 Foil, embossed, gold, ¼” squares, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-024 Foil, embossed, gold, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-009 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-011 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-026 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-011 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
65-012 Foil, embossed, silver, ¼” squares, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-027 Foil, embossed, silver, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-012 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
16-009 Color sheet for animation cradle tray, Model M100A only
22.50
86-004 Motor, 10 R.P.M. for animation tray, with threaded shaft,
100% made in the U.S.A., (This item is not discountable at this price)
45.00
86-005 Mounting bracket, metal, for animation motor, Models M100A, B & BL
16-003 Glass above grill w/printed silver stripe, 30 ½” X 6 7/8”,
65-002 Grill cloth, Specify: gold, red or silver, other colors are listed
on page 86 under GRILL CLOTH, cloth size 30” X 40”, each
65-018 Grill cloth: Burlap, Available colors, Specify: red or black
can be used on some 50s & 60s models, cloth size 30” x 40”, each
16-010 Grill bars, mirror polished stainless steel, radius bend as original, 21 pc. set
68-001 Screws for grill bars, stainless steel, (90 pcs.)
- 19 -
50.00
9.00
30.00
18.00
18.00
150.00
6.00
SEEBURG M100A of 1948 – 51 (Continued)
A-1 PART #
76-004 Key for cabinet sides and back door, (not cash door), G219
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-007 Cash door, superior grade birch covered plywood, with backup plates, (for
use with no metal frame around opening, Models A, B/BL and some C)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-001 I.D. plate, Model A, (as original), no serial number, for back of cabinet
68-003 Hook latches & 4 screws for inside of upper back door, A, B/BL, C, G/W, pr.
68-002 Safety chain for Lower back door, w/chain cover, mounting screw & key clip
68-026 Screws, hold Amp. & Receiver on lower back door, (4) 1”, (4) ½”, 65¢ ea. or 8 pcs.
66-002 Decals, water transfer, for lower back door, (On/Off & Vol. Control), 2 pc. set
66-005 Decals, Vinyl, peel & stick, for lower back door, (On/Off & Vol. Control), 2 pc. set
92-037 Capacitor kits for Amplifiers used in Seeburg Models: A, B, C, G & W,
Specify: Amplifier # MRA1-L6 through MRA4-L6, includes:
Schematics and replacement values reference sheet, each kit
92-050 Capacitor kit for WSR3, Selection Receiver, includes run condenser for
mechanism motor, schematics and replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
37-009 Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
91-003 Volume control pot. for Models 146, 147, 148, A, B/BL, C, G, W & R
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
72-004 Bulb, miniature #47 (behind select glass) (2), each
72-006 Bulb, miniature #51 (selection playing indicator) (2), each
72-011 Bulb, miniature #81 (behind mech. cover insert), (1), (10 + $1.25 ea.) or ea.
70-013 Fluorescent lamp 30 watt 36" T8, daylight, (recommended color) (1)
70-012 Fluorescent lamp 30 watt 36" T8, cool-white, (optional color)
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
Parts for Seeburg Jukeboxes are continued on the next page
- 20 -
$7.00
12.00
18.00
12.00
4.00
15.00
10.00
10.00
5.00
10.00
8.00
70.00
65.00
35.00
12.00
10.00
40.00
3.00
1.00
1.00
2.00
15.00
15.00
30.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
SEEBURG M100B of 1950 – 1951 and M100BL of 1951 – 1952
50 Records (100 Selections)
A-1 PART #
80-023 Service & parts manual, Seeburg M100B & BL, 221 pages, order R-258
17-001 Glass dome, with printed logo, (add $60 for packaging, & shipping),
(This item is out of stock at this time)
66-003 Decal, water transfer, apply to inside of glass dome facing out,
original wording, colors and font, “Seeburg Select-o-Matic 100”
17-002 Decals, water transfer, apply to inside of glass dome facing out,
original wording “7-INCH 45 RPM”, etc., original colors & shape, pair
17-003 Side glass, for left or right side of dome, edges are rounded as original, ea.
69-012 Mechanism cover, molded plastic, with Tan color molded in, Model B only,
includes 100 Select-o-matic insert, this item is not discountable
17-009
77-004
77-005
79-001
79-002
17-006
68-008
$49.50
275.00
12.00
15.00
20.00
150.00
Insert for mechanism cover "100 Select-o-Matic Mechanism"
Program glass, taller, left or right, unprinted, all edges sanded for safety, ea.
Program glass, shorter, unprinted, all edges sanded for safety, (2), each
Divider trim for program glass, aluminum, left or right, without hole, each
Divider trim for program glass, aluminum, center, with hole (1)
Retainer, (frame), for program glass, Aluminum, Models B/BL only, 5 pc. set
Screw kit, stainless, for program-glass retainer & electrical selector, Phillips
head screws, 22 pcs, (16 wood & 6 metal screws, 1 extra of each included)
Instruction glass, Maroon, (Original Factory Color), Choose either Maroon
or Red, “PRESS ONE LETTER & MAKE SELECTIONS”, 2 piece set
Instruction glass, Red, (We have had many requests for this color),
“PRESS ONE LETTER & MAKE SELECTIONS”, 2 piece set
Speed washers, hold instruction glass in place, 10 pieces
Diffuser glass, above Electrical Selector buttons, white with red stripes
Thumb screw, holds Electrical selector in place, from the inside, (4), each
Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
6.50
6.00
6.00
18.50
18.50
160.00
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
78-020 Free play adapter, plugs in to existing credit unit, has switch for free play
or coin operation, eliminates latch bar solenoid burn-out, for Seeburg
Models: A, B, BL, C, G, W, R, J and JL, (This item is not discountable)
77-035 Select glass, green, Models M100A, B, BL and C
77-036 Select glass, blue, Models M100A, B, BL and C
77-040 Coins glass, red, for coin entry casting, Models M100B, BL and C
77-041 Coins glass, yellow, for coin entry casting, Models M100B, BL and C
77-042 Coins glass, dark blue for coin entry casting, Models M100B, BL and C
77-043 Coins glass, green, for coin entry casting, Models M100B, BL and C
68-014 Coin reject plunger, (button), plated, with scavenger wire, (Models A, B & C)
83-040 Spring, plunger return, for under coin-reject plunger-button, (Models A, B & C)
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
73-080 Letter & # strips, (A1, B1, etc.), for program title holders, Red, 6 piece set
73-081 Letter & # strips, (A1, B1, etc.), for program title holders, Maroon, 6 piece set
73-082 Letter & # strips, (A1, B1, etc.), for program title holders, Aqua, 6 piece set
73-083 Letter & # strips, (A1, B1, etc.), for program title holders, Blue, 6 piece set
73-084 Letter & # strips, (A1, B1, etc.), for program title holders, Green, 6 piece set
68-007 Speed washers, round, hold letter/number strips & title headings to program
title holders. Also hold: 2 pc. Inst. glass; SELECT glass & COINS glass, 55 pieces
73-090 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Red, per pair
3.00
77-002
77-060
68-012
77-003
68-017
78-006
- 21 -
5.00
16.00
16.00
3.50
10.00
2.50
60.00
78.50
6.50
6.50
6.50
6.50
6.50
6.50
25.00
4.00
12.00
17.50
17.50
17.50
17.50
17.50
7.00
7.00
SEEBURG M100B of 1950 – 51 & M100BL of 1951 – 52 (Continued)
A-1 PART #
73-091 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Maroon, per pair
73-092 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Aqua, per pair
73-093 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Blue, per pair
73-094 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Green, per pair
73-095 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Red, per pair
73-096 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Maroon, per pair
73-097 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Aqua, per pair
73-098 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Blue, per pair
73-099 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Green, per pair
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (Pg. 13 & #31, pg. 1115 in the manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-005 Rubber cushion strips, (records rest on these while in the magazine),
front is square, Seeburg #245334, rear is round, #245468, per pair
84-020 Selector Coil & Armature Assembly, (a/k/a: Pin Bank), (Completely
dissembled & rebuilt), Specify: M100B/BL, M100C, HF100G, W100,
HF100R, 100J or 100JL, see page 80 for more information, each
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-002 Trip coil for mechanism, Models B thru JL and V200 without 2050 tube
for trip, (This item is out of Stock at this time), each
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
- 22 -
$7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
2.00
195.00
65.00
7.00
20.00
7.00
14.00
25.00
8.00
35.00
SEEBURG M100B of 1950 – 51 & M100BL of 1951 – 52 (Continued)
A-1 PART #
78-001 Cancel coil for Selector pin bank, Seeburg M100B through 100JL, (sleeve
included, plunger & spring not included), each, (Out of Stock at this time)
78-040 Cancel coil for Selector pin bank, Seeburg M100B through 100JL,
(sleeve not included, use the old sleeve, plunger & spring not included), ea.
78-031 Plunger & spring for cancel coil, for Selector pin bank,
(two piece set), each, (This item is out of stock until further notice)
73-032 Selection playing plastic, indicates letter and number of record playing,
white letters & numbers w/red background, Models B & BL only, (A1 thru K10)
73-033 Selection playing plastic, indicates letter and number of record playing,
red letters & numbers w/white background, Models B & BL only, (A1 thru K10)
73-056 Selection playing plastic, indicates letter and number of record playing,
blue letters & numbers w/white background, Models B & BL only, (A1 thru K10)
68-010 Rivets, chrome plated, for selection playing plastic, (for Models B,
BL, C, G, W, R, J & VL200), 15 pcs.
$27.50
15.00
18.00
9.00
9.00
9.00
4.00
73-036 Letter and number strip for record magazine, adhesive backed,
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
5.00
73-037 Letter and number strips for popularity meter, adhesive backed
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
5.00
73-038 Letter and number strip for selector coil frame, (pin cage), adhesive
backed, (for Models B, BL, C, G, W, R, J & JL), dark blue, (original color)
5.00
73-040 Letter & number strips for record magazine, popularity meter & pin cage,
(Models B, through JL), Specify: dark blue, aqua or red, complete 3 pc. set
15.00
17-007 Mirror for left and right end of mechanism (2), each
17-008 Masonite boards for Mech. end mirrors, precut to fit, pair
17-004 Frosted diffuser glass, 30” X 7 ¾”, for behind title board, Etched glass
15.00
6.00
30.00
65-008 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-023 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-008 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-009 Foil, embossed, gold, ¼” squares, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-024 Foil, embossed, gold, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-009 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
65-011 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-026 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-011 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-012 Foil, embossed, silver, ¼” squares, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-027 Foil, embossed, silver, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-012 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
89-001 Interior labels, (lubrication diagram, etc., Models B, BL, C, G, W, R, J & JL)
- 23 -
50.00
9.00
SEEBURG M100B of 1950 – 51 & M100BL of 1951 – 52 (Continued)
A-1 PART #
17-018 Animation cradle tray with color sheet
17-010 Color sheet for animation cradle tray
$50.00
22.50
86-004 Motor, 10 R.P.M. for animation tray, with threaded shaft,
100% made in the U.S.A., (This item is not discountable at this price)
86-005
17-033
17-016
17-027
17-029
17-025
17-005
65-002
17-013
68-001
17-014
17-011
17-012
17-023
17-015
17-030
68-013
17-019
Mounting bracket, metal, for animation motor, Models M100A, B & BL
Arm, attaches to animation motor & rotates, (1 end of drive link attaches to this)
Drive link, (one end attaches to animation cradle tray, other end to the Arm)
Hanger, for LEFT side only, for animation tray
Hanger, for RIGHT side only, for animation tray
Animation tray complete includes: tray, sheet, two hangers, drive link,
motor with threaded shaft, motor mounting bracket and rotating arm
Glass above grill with printed silver stripe, 26” X 71/8”
Grill cloth, Specify: gold, red or silver, other colors are listed
on page 86 under GRILL CLOTH, cloth size 30” X 40”, each
Grill bars, mirror polished stainless steel, radius bend as original, 21 pc. set
Screws for grill bars, stainless steel, (90 pcs.)
Grill triangles, mirror polished stainless steel, per pair
Mirror kit for all four sides of grill, 100-B, clear, (1/2" x 1" mirrors)
Mirror kit for all four sides of grill, 100-BL, blue, (1/2" x 1" mirrors)
Corner casting, not plated, for mirrors on outside of grill, (4), each
Vinyl base molding, color black, (74” X 2 7/16”), one piece
Vinyl base molding, color beige, (74” X 2 7/16”), one piece
Tacks, Specify: bright nickel, brass or antique brass,
for vinyl base molding on Models BL & C only, 65 pc. set
Stainless steel base molding. B & BL only, brushed finish,
with all holes, 1 piece, (This item is unavailable until further notice)
76-004 Key for cabinet sides and back door, (not cash door), G219
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-007 Cash door, superior grade birch covered plywood, with backup plates, (for
use with no metal frame around opening, Models A, B/BL and some C)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-054 Lock, 1 1/8” quality lock, & 2 keys for lower back door,
(rotates one-half turn and key is removable in locked and open positions)
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-002 I.D. plate, Model B, (as original), no serial number, for back of cabinet
81-003 I.D. plate, Model BL, (as original), no serial number, for back of cabinet
67-017 Upper back door, Models B/BL only, birch covered plywood, w/wooden strip
on inside, bottom edge of door only, (Purchase this when all hardware can
be transferred from original door), (+ $35.00 for shipping an oversize box)
67-018 Upper back door, Models B/BL only, birch covered plywood, all hardware
is attached except for interior foil & exterior handles, (Purchase this when
the upper back door is missing), (add $35.00 for shipping an oversize box)
68-003 Hook latches & 4 screws for inside of upper back door, A, B/BL, C, G/W, pr.
67-008 Lower back door U-wood frame, (this item does not include any metal parts
that were included with the original frame), (add $20. for pack. & shipping)
67-009 Masonite amp & receiver cover, (fits into lower back door U-wood frame)
68-002 Safety chain for Lower back door, w/chain cover, mounting screw & key clip
68-026 Screws, hold Amp. & Receiver on lower back door, (4) 1”, (4) ½”, 65¢ ea. or 8 pcs.
66-002 Decals, water transfer, for lower back door, (On/Off & Vol. Control), 2 pc. set
66-005 Decals, Vinyl, peel & stick, for lower back door, (On/Off & Vol. Control), 2 pc. set
- 24 -
45.00
9.00
10.00
7.00
10.00
10.00
125.00
30.00
18.00
130.00
6.00
35.00
55.00
90.00
16.00
18.00
18.00
7.00
80.00
7.00
12.00
18.00
12.00
12.00
4.00
15.00
15.00
85.00
105.00
10.00
60.00
55.00
10.00
5.00
10.00
8.00
SEEBURG M100B of 1950 – 51 & M100BL of 1951 – 52 (Continued)
A-1 PART #
92-037 Capacitor kits for Amplifiers used in Seeburg Models: A, B, C, G & W,
Specify: Amplifier # MRA1-L6 through MRA4-L6, includes:
Schematics and replacement values reference sheet, each kit
92-051 Capacitor kit for WSR5-L6, Selection Receiver, includes: schematics and
replacement values reference sheet, (does not include cap. for wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
37-009 Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
91-003 Volume control pot. for Models 146, 147, 148, A, B/BL, C, G, W & R
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
72-004 Bulb, miniature #47 (selection indicator) (2), & (behind select glass) (2), ea.
72-011 Bulb, miniature #81 (behind mech. cover insert), (1), (10 + $1.25 ea.) or ea.
70-011 Fluorescent lamp 25 watt 33" T12, daylight, (recommended color) (1)
70-010 Fluorescent lamp 25 watt 33" T12, cool-white, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$70.00
30.00
12.00
10.00
40.00
3.00
1.00
2.00
18.00
15.00
1.85
18.00
22.50
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG M100C of 1952 – 1953 50 Records (100 Selections)
A-1 PART #
80-024
80-025
80-026
80-085
18-001
Service & parts manual, Seeburg M100C, 148 pages, order R-259
Installation, Operation – Troubleshooting guide, M100C, 52 pgs., order R-433
Seeburg M100C, Purchase R-259 and R-433, save $11.00, order R-259A
Restoring the Seeburg “C”, detailed instructions with pictures, 64 pages
Glass dome, with printed logo, (add $60 for packaging & shipping),
(This item is out of stock at this time)
66-003 Decal, water transfer, apply to inside of glass dome facing out,
original wording, colors and font, “Seeburg Select-o-Matic 100”
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
18-003 Side Glass, for left or right side of dome, edges rounded as original, ea.
69-014 Mechanism cover, molded plastic, aqua - blue color molded in, Model C,
includes 100 Select-o-matic insert, (This item is not discountable)
18-008 Insert for mechanism cover, red lettering,
"100 Select-o-Matic Mechanism", (Curved to fit)
77-004 Program glass, taller, left or right, unprinted, all edges sanded for safety, ea.
77-005 Program glass, shorter, unprinted, all edges sanded for safety, (2), each
- 25 -
$45.00
33.00
67.00
24.00
295.00
12.00
9.00
30.00
150.00
7.00
6.00
6.00
SEEBURG M100C of 1952 – 1953 (Continued)
A-1 PART #
79-001
79-002
18-006
68-008
77-002
77-060
68-012
77-003
68-017
78-006
Divider trim for program glass, aluminum, left or right, without hole, each
Divider trim for program glass, aluminum, center, with hole (1)
Retainer, (frame), for program glass, Aluminum, Model C only, 5 pc. set
Screw kit, stainless, for program-glass retainer & electrical selector, Phillips
head screws, 22 pcs, (16 wood & 6 metal screws, 1 extra of each included)
Instruction glass, Maroon, (Original Factory Color), Choose either Maroon
or Red, “PRESS ONE LETTER & MAKE SELECTIONS”, 2 piece set
Instruction glass, Red, (We have had many requests for this color),
“PRESS ONE LETTER & MAKE SELECTIONS”, 2 piece set
Speed washers, hold instruction glass in place, 10 pieces
Diffuser glass, above Electrical Selector buttons, white with red stripes
Thumb screw, holds Electrical selector in place, from the inside, (4), each
Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
78-020 Free play adapter, plugs in to existing credit unit, has switch for free play
or coin operation, eliminates latch bar solenoid burn-out, for Seeburg
Models: A, B, BL, C, G, W, R, J and JL, (This item is not discountable)
77-035 Select glass, green, Models M100A, B, BL and C
77-036 Select glass, blue, Models M100A, B, BL and C
77-040 Coins glass, red, for coin entry casting, Models M100B, BL and C
77-041 Coins glass, yellow, for coin entry casting, Models M100B, BL and C
77-042 Coins glass, dark blue for coin entry casting, Models M100B, BL and C
77-043 Coins glass, green, for coin entry casting, Models M100B, BL and C
68-014 Coin reject plunger, (button), plated, with scavenger wire, (Models A, B & C)
83-040 Spring, plunger return, for under coin-reject plunger-button, (Models A, B & C)
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
73-080 Letter & # strips, (A1, B1, etc.), for program title holders, Red, 6 piece set
73-081 Letter & # strips, (A1, B1, etc.), for program title holders, Maroon, 6 piece set
73-082 Letter & # strips, (A1, B1, etc.), for program title holders, Aqua, 6 piece set
73-083 Letter & # strips, (A1, B1, etc.), for program title holders, Blue, 6 piece set
73-084 Letter & # strips, (A1, B1, etc.), for program title holders, Green, 6 piece set
68-007 Speed washers, round, hold letter/number strips & title headings to program
title holders. Also hold: 2 pc. Inst. glass; SELECT glass & COINS glass, 55 pieces
73-090 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Red, per pair
73-091 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Maroon, per pair
73-092 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Aqua, per pair
73-093 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Blue, per pair
73-094 Coin instruction plastics for program title holders, 6 PLAYS – QUARTER,
2 PLAYS DIME, 1 PLAY NICKEL, Green, per pair
73-095 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Red, per pair
73-096 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Maroon, per pair
73-097 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Aqua, per pair
73-098 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Blue, per pair
- 26 -
$18.50
18.50
160.00
5.00
16.00
16.00
3.50
10.00
2.50
60.00
3.00
78.50
6.50
6.50
6.50
6.50
6.50
6.50
25.00
4.00
12.00
17.50
17.50
17.50
17.50
17.50
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
SEEBURG M100C of 1952 – 1953 (Continued)
A-1 PART #
73-099 Coin instruction plastics for program title holders, 3 PLAYS – QUARTER,
1 PLAY – DIME, Green, per pair
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (#34 on page 1149 in the manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-005 Rubber cushion strips, (records rest on these while in the magazine),
front is square, Seeburg #245334, rear is round, #245468, per pair
84-020 Selector Coil & Armature Assembly, (a/k/a: Pin Bank), (Completely
dissembled & rebuilt), Specify: M100B/BL, M100C, HF100G, W100,
HF100R, 100J or 100JL, see page 80 for more information, each
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-002 Trip coil for mechanism, Models B thru JL and V200 without 2050 tube
for trip, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
$7.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
2.00
195.00
65.00
7.00
20.00
7.00
14.00
25.00
35.00
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
78-001 Cancel coil for Selector pin bank, Seeburg M100B through 100JL, (sleeve
included, plunger & spring not included), each, (Out of Stock at this time)
27.50
78-040 Cancel coil for Selector pin bank, Seeburg M100B through 100JL,
(sleeve not included, use the old sleeve, plunger & spring not included), ea.
15.00
78-031 Plunger & spring for cancel coil, for Selector pin bank,
(two piece set), each, (This item is out of stock until further notice)
18.00
88-006
88-007
18-004
73-034
Spray paint, Seeburg C Yellow, for mech. frame, acrylic enamel, 10.5 oz. can
Spray paint, Seeburg C Aqua/Blue, for mech. cover, acrylic enamel, 10.5 oz. can
Decals, water transfer, Oval 45 R.P.M. record, for mech. ends, pair
Selection playing plastic, indicates letter and number of record playing,
aqua letters & numbers w/white background, Model C only, (A1 thru K10)
68-010 Rivets, chrome plated, for selection playing plastic, (Models B thru VL200), 15 pcs.
73-036 Letter and number strip for record magazine, adhesive backed,
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
73-037 Letter and number strips for popularity meter, adhesive backed
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
- 27 -
8.00
25.00
25.00
11.00
9.00
4.00
5.00
5.00
SEEBURG M100C of 1952 – 1953 (Continued)
A-1 PART #
73-038 Letter and number strip for selector coil frame, (pin cage), adhesive
backed, (for Models B, BL, C, G, W, R, J & JL), dark blue, (original color)
$5.00
73-040 Letter & number strips for record magazine, popularity meter & pin cage,
(Models B, through JL), Specify: dark blue, aqua or red, complete 3 pc. set
15.00
18-007 Mirror kit, exact size mirrors, for frames at each end of mechanism, this
package has four pre-cut panels and a few extra mirrors = 1 complete set
18-020 Mirror kit, exact size mirrors, for frames at each end of mechanism, this
package has 6 pre-cut panels, enough mirrors for 3 frames = (1 ½ sets)
(This item is not discountable at this reduced price)
68-030 Screws (6) and washers (6), stainless steel, hold mirror frames in place at
both ends of mechanism, (screw heads were originally painted red), 12 pc. set
67-010 Masonite boards for Mech. end mirrors, cut to fit, (flat, not mounded), pair
68-080 Screws, Stainless steel, (Oval head, slotted, as original) (6) and finishing
washers (6), hold mechanism end caps in place, 12 piece set
18-005 Frosted diffuser glass, 30” X 7”, for behind title board, Etched glass
65-003 Foil, embossed, gold, ½” pillowed squares,
for interior of Seeburg M100C, Wurlitzer 1080 & 1100,
32” X 16” sheet, Original thickness, (2 sheets required), each sheet
40.00
65-020 Special: This is the exact same foil as our # 65-003 but the gauge
or thickness of the sheet is thinner, save 50% off the regular price,
32” X 16” sheet, Thinner gauge, (2 sheets required), each sheet
20.00
65-008 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-023 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-008 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-009 Foil, embossed, gold, ¼” squares, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-024 Foil, embossed, gold, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-009 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-011 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-026 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-011 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-012 Foil, embossed, silver, ¼” squares, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-027 Foil, embossed, silver, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-012 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
89-001 Interior labels, (lubrication diagram, etc., Models B, BL, C, G, W, R, J & JL)
65-002 Grill cloth, Specify: gold, red or silver, other colors are listed
on page 86 under GRILL CLOTH, cloth size 30” X 40”, each
18-010 Clear plastic Grill tube, with mirrored Mylar insert, excellent replacement,
can be mingled with original glass tubes, best available, 12 required, each
18-011 Clear plastic Grill tubes, with mirrored Mylar inserts, excellent replacements,
best available, (Special: save $30.00 per 12 piece set), (This item is not
discountable at the 12 piece price), per 12 piece set
- 28 -
60.00
70.00
4.00
7.00
6.00
30.00
50.00
9.00
18.00
18.50
179.00
SEEBURG M100C of 1952 – 1953 (Continued)
A-1 PART #
18-012 Grill tube brackets (spoons or holders), each
86-002 Drop in animation assemblies, quiet synchronized motors, brilliant
colors using Ken Arnold reproduction color sheets, complete units,
perfect fit, (plug-in directly to 110 volts), 100% U.S.A. made, per pair
Drop in animation assemblies are not discountable
86-001 Color sheets only, for animation, 1 left and 1 right, (brilliant colors), per pair
18-013 Pilaster plastics white (frosted crystallization, inside, as original), choose
white for painted cabinets, or stained cabinets with very light color stain, pair
18-014 Pilaster plastics off-white/beige (frosted crystallization, inside, as original),
choose off-white/beige for medium or dark color stained cabinets, per pair
18-030 Pilaster plastics white translucent, same shape as our A-1 # 18-013 except
these pilasters do not have the frosted crystallization, inside), per pair
18-017 Wooden toe for below front of pilaster plastic, M100C only (2), each
86-003 Motor for original animation, includes mounting bracket & sprocket
18-015 Vinyl base molding, color - black, 2 pieces, per pair
18-016 Vinyl base molding, color - beige, 2 pieces, per pair
68-013 Tacks, Specify: bright nickel, brass or antique brass,
for vinyl base molding on Models BL & C only, 65 pc. set
76-005 Key for cabinet sides and back door, (not cash door), G245
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-007 Cash door, superior grade birch covered plywood, with backup plates, (for
use with no metal frame around opening, Models A, B/BL and some C)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-054 Lock, 1 1/8” quality lock, & 2 keys for lower back door,
(rotates one-half turn and key is removable in locked and open positions)
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-004 I.D. plate, Model C, (as original), no serial number, for back of cabinet
67-019 Upper back door, Model M100C only, birch covered plywood, wooden strip
on inside, bottom edge of door only, (Purchase this when all hardware can
be transferred from original door), (+ $35.00 for shipping an oversize box)
67-020 Upper back door, Model M100C only, birch covered plywood, all hardware
is attached except for interior top trim & exterior handles, (Purchase this
when upper back door is missing), (+ $35.00 for shipping an oversize box)
83-025 Top trim for inside upper back door, stainless steel, original shape, 19” wide
68-003 Hook latches & 4 screws for inside of upper back door, A, B/BL, C, G/W, pr.
67-008 Lower back door U-wood frame, (this item does not include any metal parts
that were included with the original frame), (add $20. for pack. & shipping)
67-009 Masonite amp & receiver cover, (fits into lower back door U-wood frame)
68-002 Safety chain for Lower back door, w/chain cover, mounting screw & key clip
68-026 Screws, hold Amp. & Receiver on lower back door, (4) 1”, (4) ½”, 65¢ ea. or 8 pcs.
66-002 Decals, water transfer, for lower back door, (On/Off & Vol. Control), 2 pc. set
66-005 Decals, Vinyl, peel & stick, for lower back door, (On/Off & Vol. Control), 2 pc. set
92-037 Capacitor kits for Amplifiers used in Seeburg Models: A, B, C, G & W,
Specify: Amplifier # MRA1-L6 through MRA4-L6, includes:
Schematics and replacement values reference sheet, each kit
92-051 Capacitor kit for WSR5-L6, Selection Receiver, includes: schematics and
replacement values reference sheet, (does not include cap. for wallboxes)
92-052 Capacitor kit for WSR7-L6, Selection Receiver, includes: schematics and
replacement values reference sheet, (does not include cap. for wallboxes)
- 29 -
$6.00
325.00
38.00
260.00
260.00
160.00
29.00
100.00
18.00
18.00
7.00
7.00
12.00
18.00
18.00
12.00
12.00
12.00
4.00
15.00
85.00
105.00
22.50
10.00
60.00
55.00
10.00
5.00
10.00
8.00
70.00
30.00
30.00
SEEBURG M100C of 1952 – 1953 (Continued)
A-1 PART #
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
37-009 Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
91-003 Volume control pot. for Models 146, 147, 148, A, B/BL, C, G, W & R
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
72-003 Bulb, miniature #44 (selection indicator lamps) (2 required), each
72-004 Bulb, miniature #47 (behind select glass) (2 required), each
72-011 Bulb, miniature #81 (behind mech. cover insert), (1), (10 + $1.25 ea.) or ea.
70-007 Fluorescent lamp 20 watt 24" T12, daylight, recommended color (2), each
70-006 Fluorescent lamp 20 watt 24" T12, cool-white, optional color, each
70-011 Fluorescent lamp 25 watt 33" T12, daylight, (recommended color) (1)
70-010 Fluorescent lamp 25 watt 33" T12, cool-white, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-021 Ballast, Double 20 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
71-026 Vinyl cube, plug-in-tap, converts the single A. C. socket in all WSR3, 5 or 7,
TSR1–6 or TSU1–7 in Seeburg’s M100A through DS160 to 3 A. C. outlets
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$12.00
10.00
40.00
3.00
1.00
1.00
2.00
10.00
10.00
18.00
15.00
1.85
15.00
45.00
18.00
22.50
1.75
12.00
7.50
9.00
3.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG HF100G & W100 of 1953 – 54 50 Records (100 Selections)
A-1 PART #
80-028
80-029
80-030
19-001
Service & parts manual, Seeburg HF100G & W100, 155 pgs., order R-266
Installation, Operation – Troubleshooting, G & W, 94 pages, order R-226
Seeburg G & W, Purchase R-266 and R-226, save $11.05, order R-266A
Glass dome, with printed logo, (add $60 for packaging & shipping),
(This item is out of stock at this time)
66-003 Decal, water transfer, apply to inside of glass dome facing out,
original wording, colors and font, “Seeburg Select-o-Matic 100”
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
19-002 Side Glass, for left or right side of dome, each
69-016 Mechanism cover, molded plastic, with light blue color molded in, Model G,
includes 100 Select-o-matic insert, (This item is not discountable)
19-004 Insert for Mechanism cover window, SELECT-O-MATIC 100, (Curved to fit)
- 30 -
$42.50
35.50
66.95
295.00
12.00
9.00
35.00
150.00
7.00
SEEBURG HF100G and W100 of 1953 – 1954 (Continued)
A-1 PART #
77-007 Program glass, for models: G, W, R, J & JL, (letters & numbers are baked on,
Exact, original, font & color, all edges of glass are sanded), 5 piece set
$45.00
77-008 Program glass, for models: G, W, R, J & JL, single pieces, (letters & #s are
baked on, original font & color: A1/B1, C1/D1, E1/F1, G1/H1 or J1/K1), each
12.50
64-010 Sponge rubber gasket, for Original Thickness G, W, R, J & JL
program glass, (this gasket thickness, 3/8” W x 1/8” thick, is for
factory-original-thickness program glass, only), 42” piece
2.80
64-015 Sponge rubber gasket, for Our Reproduction G, W, R, J & JL
program glass, (this gasket thickness. 3/8” W x 3/16” thick, is for
our reproduction program glass only), 42” piece
3.15
77-009 Instruction glass, 3 colors, 2 pc. set, “6 PLAYS QUARTER”, Original Maroon color
77-065 Instruction glass, 3 colors, 2 pc. set, “6 PLAYS QUARTER”, Popular Red color
16.00
16.00
77-010 Instruction glass, 3 colors, 2 pc. set, “3 PLAYS QUARTER”, Original Maroon color
77-067 Instruction glass, 3 colors, 2 pc. set, “3 PLAYS QUARTER”, Popular Red color
16.00
16.00
77-011 Instruction glass, 3 colors, 2 pc. set, “25¢ PER SELECTN.”, Original Maroon color
16.00
68-012 Speed washers, hold instruction glass in place, 10 pieces
78-006 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
78-020 Free play adapter, plugs in to existing credit unit, has switch for free play
or coin operation, eliminates latch bar solenoid burn-out, for Seeburg
Models: A, B, BL, C, G, W, R, J and JL, (This item is not discountable)
77-050 Select glass, Seeburg G, W, R, J, JL, L100 and 101, green
77-051 Select glass, Seeburg G, W, R, J, JL, L100 and 101, blue
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
68-075 Speed washers, round, hold title headings to program holders, 12 pc. set
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (Pg. 1172 & #14, pg. 1181 in the manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-005 Rubber cushion strips, (records rest on these while in the magazine),
front is square, Seeburg #245334, rear is round, #245468, per pair
Parts for Seeburg HF100G and W100 are continued on the next page
- 31 -
3.50
60.00
3.00
78.50
6.50
6.50
25.00
4.00
12.00
1.55
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
2.00
SEEBURG HF100G and W100 of 1953 – 1954 (Continued)
A-1 PART #
84-020 Selector Coil & Armature Assembly, (a/k/a: Pin Bank), (Completely
dissembled & rebuilt), Specify: M100B/BL, M100C, HF100G, W100,
HF100R, 100J or 100JL, see page 80 for more information, each
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-012 Spring for snap switch for electrical selector, (Models G & W only), each
78-002 Trip coil for mechanism, Models B thru JL and V200 without 2050 tube
for trip, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
$195.00
65.00
7.00
20.00
7.00
14.00
14.00
25.00
35.00
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
78-001 Cancel coil for Selector pin bank, Seeburg M100B through 100JL, (sleeve
included, plunger & spring not included), each, (Out of Stock at this time)
27.50
78-040 Cancel coil for Selector pin bank, Seeburg M100B through 100JL,
(sleeve not included, use the old sleeve, plunger & spring not included), ea.
15.00
78-031 Plunger & spring for cancel coil, for Selector pin bank,
(two piece set), each, (This item is out of stock until further notice)
18.00
88-008 Spray paint, Red, for Model G magazine and mechanism frame, also for
Model W entire mech. except for mech. cover, acrylic enamel, 10.5 oz. can
88-009 Spray paint, Dark Blue, for HF100G & W100, metal grill on front, 12 oz. can
88-010 Spray paint, Light Blue, for HF100G, for mechanism cover, mech. end
caps, etc., also for HF100R mech. cover, acrylic enamel, 10.5 oz. can
19-005 Decals, water transfer, Round 45 R.P.M. for Mech. ends, pair
73-035 Selection playing plastic, indicates letter and number of record playing, dark
blue letters & numbers w/white background, Models G, W, & R, (A1 thru K0)
68-010 Rivets, chrome plated, for selection playing plastic, (for Models B,
BL, C, G, W, R, J & VL200), 15 pcs.
8.00
25.00
14.00
25.00
10.00
9.00
4.00
73-036 Letter and number strip for record magazine, adhesive backed,
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
5.00
73-037 Letter and number strips for popularity meter, adhesive backed
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
5.00
73-038 Letter and number strip for selector coil frame, (pin cage), adhesive
backed, (for Models B, BL, C, G, W, R, J & JL), dark blue, (original color)
5.00
73-040 Letter & number strips for record magazine, popularity meter & pin cage,
(Models B, through JL), Specify: dark blue, aqua or red, complete 3 pc. set
19-006 Mirror kit, exact diagonal cut, for frames at each end of mechanism, this
package has four pre-cut panels and a few extra mirrors = 1 complete set
19-015 Mirror kit, exact diagonal cut, for frames at each end of mechanism, this
package has 6 pre-cut panels, enough mirrors for 3 frames = (1 ½ sets)
(This item is not discountable at this reduced price)
68-030 Screws (6) and washers (6), stainless steel, hold mirror frames in place at
both ends of mechanism, (screw heads were originally painted red), 12 pc. set
- 32 -
15.00
85.00
100.00
4.00
SEEBURG HF100G and W100 of 1953 – 1954 (Continued)
A-1 PART #
67-010 Masonite boards for Mech. end mirrors, cut to fit, (flat, not mounded), pair
68-080 Screws, Stainless steel, (Oval head, slotted, as original) (6) and finishing
washers (6), hold mechanism end caps in place, 12 piece set
19-003 Frosted diffuser glass, 31 ¾” X 5 ¾”, for behind title board, Etched glass
6.00
30.00
65-008 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-023 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-008 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-009 Foil, embossed, gold, ¼” squares, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-024 Foil, embossed, gold, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-009 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-011 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-026 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-011 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-012 Foil, embossed, silver, ¼” squares, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-027 Foil, embossed, silver, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-012 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
89-001 Interior labels, (lubrication diagram, etc., Models B, BL, C, G, W, R, J & JL)
65-002 Grill cloth, Specify: gold, red or silver, other colors are listed
on page 86 under GRILL CLOTH, cloth size 30” X 40”, each
86-002 Drop in animation assemblies, quiet synchronized motors, brilliant
colors using Ken Arnold reproduction color sheets, complete units,
perfect fit, (plug-in directly to 110 volts), 100% U.S.A. made, per pair
Drop in animation assemblies are not discountable
86-001 Color sheets only, for animation, 1 left and 1 right, (brilliant colors), pair
19-007 G Pilaster plastics, white, (frosted crystallization, inside), replacements
for original stainless steel pilasters, choose white for painted cabinets,
or cabinets that are stained with a very light color stain, per pair
19-008 G Pilaster plastics, off white, (frosted crystallization, inside),
replacements for original stainless steel pilasters, choose off-white/beige
for medium to dark color stained cabinets, per pair
19-009 W Pilaster plastics, available in white only, (frosted crystallization
inside & exact “patch quilt pattern” printed outside, as original), per pair
76-006 Key for cabinet sides and back door, (not cash door), F221
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-054 Lock, 1 1/8” quality lock, & 2 keys for lower back door,
(rotates one-half turn and key is removable in locked and open positions)
- 33 -
$7.00
9.00
18.00
325.00
38.00
295.00
295.00
325.00
7.00
12.00
18.00
12.00
12.00
12.00
SEEBURG HF100G and W100 of 1953 – 1954 (Continued)
A-1 PART #
76-085
81-005
81-037
67-015
67-016
83-025
68-003
67-008
67-009
68-002
68-026
66-002
66-005
92-037
92-051
92-052
92-025
37-009
91-003
76-001
72-003
72-004
72-011
70-007
70-006
70-011
70-010
70-050
71-001
71-006
71-035
71-028
71-016
71-040
71-033
71-026
Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
I.D. plate, Model G only, (as original), no serial number, for back of cabinet
I.D. plate, Model W only, (printed HF100W), no serial #, for back of cabinet
Upper back door, Models G/W only, birch covered plywood, w/wooden strip
on inside, bottom edge of door only, (Purchase this when all hardware can
be transferred from original door), (+ $35.00 for shipping an oversize box)
Upper back door, Models G/W only, birch covered plywood, all hardware is
attached except for interior foil & exterior handles, (Purchase this item
when upper back door is missing), (+ $35.00 for shipping an oversize box)
Top trim for inside upper back door, stainless steel, original shape, 19” wide
Hook latches & 4 screws for inside of upper back door, A, B/BL, C, G/W, pr.
Lower back door U-wood frame, (this item does not include any metal parts
that were included with the original frame), (add $20. for pack. & shipping)
Masonite amp & receiver cover, (fits into lower back door U-wood frame)
Safety chain for Lower back door, w/chain cover, mounting screw & key clip
Screws, hold Amp. & Receiver on lower back door, (4) 1”, (4) ½”, 65¢ ea. or 8 pcs.
Decals, water transfer, for lower back door, (On/Off & Vol. Control), 2 pc. set
Decals, Vinyl, peel & stick, for lower back door, (On/Off & Vol. Control), 2 pc. set
Capacitor kits for Amplifiers used in Seeburg Models: A, B, C, G & W,
Specify: Amplifier # MRA1-L6 through MRA4-L6, includes:
Schematics and replacement values reference sheet, each kit
Capacitor kit for WSR5-L6, Selection Receiver, includes: schematics and
replacement values reference sheet, (does not include cap. for wallboxes)
Capacitor kit for WSR7-L6, Selection Receiver, includes: schematics and
replacement values reference sheet, (does not include cap. for wallboxes)
Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
Volume control pot. for Models 146, 147, 148, A, B/BL, C, G, W & R
Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
Bulb, miniature #44 (selection indicator lamps) (2 required), each
Bulb, miniature #47 (behind credit glass) (2 required), each
Bulb, miniature #81 (behind mech. cover insert), (1), (10 + $1.25 ea.) or ea.
Fluorescent lamp 20 watt 24" T12, daylight, for Models with animation (2), ea.
Fluorescent lamp 20 watt 24" T12, cool-white, optional color, animation
Fluorescent lamp 25 watt 33" T12, daylight, (recommended color) (1)
Fluorescent lamp 25 watt 33" T12, cool-white, (optional color)
Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
Vinyl cube, plug-in-tap, converts the single A. C. socket in all WSR3, 5 or 7,
TSR1–6 or TSU1–7 in Seeburg’s M100A through DS160 to 3 A. C. outlets
- 34 -
$4.00
15.00
15.00
85.00
105.00
22.50
10.00
60.00
55.00
10.00
5.00
10.00
8.00
70.00
30.00
30.00
12.00
10.00
40.00
3.00
1.00
1.00
2.00
10.00
10.00
18.00
15.00
1.85
15.00
18.00
22.50
1.75
12.00
7.50
9.00
3.00
SEEBURG HF100G and W100 of 1953 – 1954 (Continued)
A-1 PART #
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
19-010 Stainless Steel base trim plates, mirror polished, per pair
(This item unavailable until further notice)
50.00
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
3.00
8.00
90-
$6.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG HF100R of 1954 – 1955, 100J & 100JL of 1955 – 57
50 Records (100 Selections)
A-1 PART #
80-031
80-032
80-033
20-001
Service & parts manual, Seeburg R, J & JL, 177 pages, order R-267
Installation, Operation - Troubleshooting, R, J & JL, 70 pages, order R-426
Seeburg R, J & JL, Purchase R-267 and R-426, save $11.00, order R-267A
Glass dome, with printed logo, (add $60.00 for packaging & shipping),
(This item is out of stock at this time)
$42.50
30.50
62.00
Decal for dome glass, water transfer, Blue & white, Seeburg HIGH FIDELITY
Decal for dome glass, water transfer, Red & white, Seeburg HIGH FIDELITY
Decal for dome glass, water transfer, Gold & white, Seeburg HIGH FIDELITY
Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
20-006 Side Glass for left or right side of dome, for Models R, J and JL, edges are
rounded as original, (add $20.00 for packing & shipping one or both), each
69-003 Mechanism cover, molded plastic, with light blue color molded in,
Model R only, medallion not included, (This item is not discountable)
10.00
10.00
10.00
150.00
69-010 Mechanism cover, molded plastic, with yellow color molded in,
Models J/JL only, medallion not included, (This item is not discountable)
150.00
20-023
20-024
20-025
66-001
20-026 Plastic Medallion for mechanism cover, for Model R only, screen-printed
and mirror-Mylar on back, flat front and back, includes attachment hardware
20-027 Plastic Medallion for mechanism cover, for Models J & JL, screen-printed
and mirror-Mylar on back, flat front and back, includes attachment hardware
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
77-007 Program glass, for models: G, W, R, J & JL, (letters & numbers are baked on,
Exact, original, font & color, all edges of glass are sanded), 5 piece set
77-008 Program glass, for models: G, W, R, J & JL, single pieces, (letters & #s are
baked on, original font & color: A1/B1, C1/D1, E1/F1, G1/H1 or J1/K1), each
64-010 Sponge rubber gasket, for Original Thickness G, W, R, J & JL
program glass, (this gasket thickness, 3/8” W x 1/8” thick, is for
factory-original-thickness program glass, only), 42” piece
64-015 Sponge rubber gasket, for Our Reproduction G, W, R, J & JL
program glass, (this gasket thickness. 3/8” W x 3/16” thick, is for
our reproduction program glass only), 42” piece
285.00
9.00
48.00
80.00
80.00
8.00
1.00
45.00
12.50
2.80
3.15
77-009 Instruction glass, 3 colors, 2 pc. set, “6 PLAYS QUARTER”, Original Maroon color
16.00
77-065 Instruction glass, 3 colors, 2 pc. set, “6 PLAYS QUARTER”, Popular Red color
16.00
77-010 Instruction glass, 3 colors, 2 pc. set, “3 PLAYS QUARTER”, Original Maroon color
16.00
- 35 -
SEEBURG HF100R of 1954 – 1955 and
100J & 100JL of 1955 – 1957 (Continued)
A-1 PART #
77-067 Instruction glass, 3 colors, 2 pc. set, “3 PLAYS QUARTER”, Popular Red color
77-011 Instruction glass, 3 colors, 2 pc. set, “25¢ PER SELECTN.”, Original Maroon color
68-012 Speed washers, hold instruction glass in place, 10 pieces
78-006 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
78-020 Free play adapter, plugs in to existing credit unit, has switch for free play
or coin operation, eliminates latch bar solenoid burn-out, for Seeburg
Models: A, B, BL, C, G, W, R, J and JL, (This item is not discountable)
77-050 Select glass, Seeburg G, W, R, J, JL, L100 and 101, green
77-051 Select glass, Seeburg G, W, R, J, JL, L100 and 101, blue
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
68-075 Speed washers, round, hold title headings to program holders, 12 pc. set
20-019 Rivets, plastic, clear color, 2 parts, for upper interior trim, for HF100R, 50 pcs.
20-035 Rivets, plastic, gold color, 2 parts, for upper interior trim, for HF100R, 50 pcs.
20-022 Rivets, plastic, clear color, 2 parts, for interior trim, for 100J & 100JL, 10 pcs.
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (Pictured on page 1219 in the manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-005 Rubber cushion strips, (records rest on these while in the magazine),
front is square, Seeburg #245334, rear is round, #245468, per pair
84-020 Selector Coil & Armature Assembly, (a/k/a: Pin Bank), (Completely
dissembled & rebuilt), Specify: M100B/BL, M100C, HF100G, W100,
HF100R, 100J or 100JL, see page 80 for more information, each
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-002 Trip coil for mechanism, Models B thru JL and V200 without 2050 tube
for trip, (This item is out of Stock at this time), each
- 36 -
$16.00
16.00
3.50
60.00
3.00
78.50
6.50
6.50
25.00
4.00
12.00
1.55
15.00
15.00
3.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
2.00
195.00
65.00
7.00
20.00
7.00
14.00
25.00
SEEBURG HF100R of 1954 – 1955 and
100J & 100JL of 1955 – 1957 (Continued)
A-1 PART #
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
$35.00
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
78-001 Cancel coil for Selector pin bank, Seeburg M100B through 100JL, (sleeve
included, plunger & spring not included), each, (Out of Stock at this time)
27.50
78-040 Cancel coil for Selector pin bank, Seeburg M100B through 100JL,
(sleeve not included, use the old sleeve, plunger & spring not included), ea.
15.00
78-031 Plunger & spring for cancel coil, for Selector pin bank,
(two piece set), each, (This item is out of stock until further notice)
18.00
88-010 Spray paint, Light Blue, HF100R mech. cover, also Model G, for mechanism
cover & mech. end caps, acrylic enamel, 10.5 oz. can
20-002 Mech. plastic end cap, Blue "100" for Model R, (L.H. & R.H., same item),
(This item is unavailable until further notice), each
20-003 Mech. plastic end cap, Blue "100" for Model R, (L.H. & R.H., same item),
(This item is unavailable until further notice), pair
20-004 Mech. plastic end cap, Red "100" for Models J & JL,
(L.H. or R.H., same item), (This item unavailable until further notice), ea.
20-005 Mech. plastic end cap, Red "100" for Models J & JL,
(L.H. or R.H., same item), (This item unavailable until further notice), pair
8.00
25.00
125.00
225.00
125.00
225.00
68-085 Screws, Stainless steel, (Oval head, Phillips, as original) (4) and finishing
washers (4), hold mechanism end caps in place, 8 piece set
73-035 Selection playing plastic, indicates letter and number of record playing, dark
blue letters & numbers w/white background, Models G, W, & R, (A1 thru K0)
68-010 Rivets, chrome plated, for selection playing plastic, (for Models B,
BL, C, G, W, R, J & VL200), 15 pcs.
73-039 Selection playing plastic, indicates letter and number of record playing,
red letters & numbers w/white background, Models J and JL only, (A1 thru K0)
68-011 Rivets, brass, for selection playing plastic, (Models JL & V200 only), 15 pcs.
9.00
8.00
73-036 Letter and number strip for record magazine, adhesive backed,
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
5.00
73-037 Letter and number strips for popularity meter, adhesive backed
(for Models B, BL, C, G, W, R, J & JL), Specify: dark blue, aqua or red
73-038 Letter and number strip for selector coil frame, (pin cage), adhesive
backed, (for Models B, BL, C, G, W, R, J & JL), dark blue, (original color)
73-040 Letter & number strips for record magazine, popularity meter & pin cage,
(Models B, through JL), Specify: dark blue, aqua or red, complete 3 pc. set
20-007
20-008
20-009
20-010
89-001
65-002
Frosted diffuser glass, 32” X 4 ¼”, for behind title board, Etched glass
Diffuser above grill, original shape and color, (blue), for HF100R only
Diffuser above grill, original shape, multi-colored, printed, for 100-J only
Diffuser above grill, original shape, multi-colored, printed, for 100-JL only
Interior labels, (lubrication diagram, etc., Models B, BL, C, G, W, R, J & JL)
Grill cloth, gold is suggested for Model HF100R, other colors are listed
on page 86 under GRILL CLOTH, cloth size 30” X 40”, each
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
20-013 Grill glass, fluted, (all sharp edges have been sanded for safety),
(add $25.00 for special packaging and shipping), complete 5 piece set,
- 37 -
5.00
9.00
4.00
5.00
5.00
15.00
30.00
35.00
40.00
40.00
9.00
18.00
14.00
300.00
SEEBURG HF100R of 1954 – 1955 and
100J & 100JL of 1955 – 1957 (Continued)
A-1 PART #
20-014
20-015
20-030
20-017
20-018
20-021
76-007
67-004
67-012
76-050
76-051
76-054
76-085
81-006
81-007
81-008
67-008
67-009
68-002
68-026
66-002
66-005
92-038
92-039
81-035
92-052
92-025
37-009
91-003
91-004
76-001
72-003
72-004
72-011
70-011
70-010
70-050
71-006
71-035
Grill glass, fluted, single piece, (all sharp edges have been sanded), each,
Grill frame, (for fluted grill glass), polished stainless steel, each
Grill frames, (for fluted grill glass), polished stainless steel, 5 piece set
Kick plate, Stainless steel, front, Model R only
Foot trim strips, Stainless steel, left & right sides, Model R only, per pair
Kick plate, Stainless steel, front, Models J and JL only
Key for cabinet sides and back door, (not cash door), F279
Cash bag, (duck cloth, as original, hand made in the U.S.A.)
Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
Lock, 1 1/8” quality lock, & 2 keys for lower back door,
(rotates one-half turn and key is removable in locked and open positions)
Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
I.D. plate, Model R, (as original), no serial number, for back of cabinet
I.D. plate, Model J, (as original), no serial number, for back of cabinet
I.D. plate, Model JL, (as original), no serial number, for back of cabinet
Lower back door U-wood frame, (this item does not include any metal parts
that were included with the original frame), (add $20. for pack. & shipping)
Masonite amp & receiver cover, (fits into lower back door U-wood frame)
Safety chain for Lower back door, w/chain cover, mounting screw & key clip
Screws, hold Amp. & Receiver on lower back door, (4) 1”, (4) ½”, 65¢ ea. or 8 pcs.
Decals, water transfer, for lower back door, (On/Off & Vol. Control), 2 pc. set
Decals, Vinyl, peel & stick, for lower back door, (On/Off & Vol. Control), 2 pc. set
Capacitor kit for Seeburg Models R, J & JL, using Amp. # MRA5-L6
includes schematics & replacement values reference sheet, ea.
Capacitor kit for Seeburg’s: J, JL, V & VL200, using Amplifier #: HFMA1-L6
includes schematics & replacement values reference sheet
Printed I.D. plate, (Record Compensation, Tone Balance, Serial #, etc.), for
HFMA1-L6, (High Fidelity Master Amplifier), 8 ¾” X 2 ⅞”, not discountable
Capacitor kit for WSR7-L6, Selection Receiver, includes: schematics and
replacement values reference sheet, (does not include cap. for wallboxes)
Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
Volume control pot. for Models 146, 147, 148, A, B/BL, C, G, W & R
Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
Bulb, miniature #44 (selection indicator lamps) (2 required), each
Bulb, miniature #47 (behind credit glass) (2 required), each
Bulb, miniature #81 (behind mechanism plastic end cap “100”),
(2 required), (Special: 10 or more # 81 Bulbs only $1.25 each) or each
Fluorescent lamp 25 watt 33" T12, daylight, (recommended color) (1)
Fluorescent lamp 25 watt 33" T12, cool-white, (optional color)
Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
- 38 -
$65.00
20.00
85.00
40.00
45.00
45.00
7.00
12.00
18.00
12.00
12.00
12.00
4.00
15.00
15.00
15.00
60.00
55.00
10.00
5.00
10.00
8.00
70.00
70.00
22.50
30.00
12.00
10.00
40.00
40.00
3.00
1.00
1.00
2.00
18.00
15.00
1.85
18.00
22.50
SEEBURG HF100R of 1954 – 1955 and
100J & 100JL of 1955 – 1957 (Continued)
A-1 PART #
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG V200 of 1955 – 1956 and VL200 of 1956 – 1957
100 Records (200 Selections)
A-1 PART #
80-035
80-036
80-037
21-001
Service & parts manual, Seeburg V200 & VL200, 188 pages, order R-263
Installation, Operation & Troubleshooting, V & VL, 56 pages, order R-427
Seeburg V & VL, Purchase R-263 and R-427, save $10.00, order R-263A
Glass dome, with printed logo, (add $65 for packaging & shipping)
(This item is out of stock at this time)
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
21-002 Side Glass for left or right side of dome, for V200 and VL200, edges are
rounded, (+ $20.00 for shipping one or both because box is oversize), each
69-005 Mechanism cover, molded plastic, original Gray color molded in, for
Model V200 only, medallion not included, (This item is not discountable)
69-006 Mechanism cover, molded plastic, original Salmon/Pink color molded in, for
Model VL200 only, medallion not included, (This item is not discountable)
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
21-009 Instruction glass, left, (TO VIEW ENTIRE PROGRAM…), (for V &VL200)
68-012 Speed washers, hold instruction glass in place, 10 pieces
21-010 Coins and Instruction glass, right, (make 5¢ selection only) (for V/VL)
21-011 Coins and Instruction glass, right, (make 10¢ selection only) (for V/VL)
21-012 Credit glass right (small, red, 5¢, ANOTHER COIN REQUIRED) (for V/VL)
81-030 Coin entry instruction plate, etched metal, printed, (NICKELS, DIMES, ETC.)
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
$42.50
31.50
64.00
350.00
9.00
45.00
175.00
175.00
8.00
1.00
15.00
3.50
15.00
15.00
8.00
12.00
60.00
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
73-009 Lens for button heading, located above selector switch arrow (5), each
73-010 Lenses for button heading, located above selector switch arrow,
(This item is currently out of stock until further notice), 5 piece set
3.00
25.00
21-005 200 Selection glass, for light bar, for V-200 only, (red & white)
21-006 200 Selection glass, for light bar, for VL-200 only, (gold & white)
17.00
17.00
- 39 -
4.00
12.00
55.00
SEEBURG V200 of 1955 – 1956 and VL200 of 1956 – 1957 (Continued)
A-1 PART #
21-014 Metal inserts for drum cover, V-200 only, horizontal ribs,
gold anodized, (This item is not discountable), pair
$50.00
73-105 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red Hit Tunes (Drummer), 2 piece set
7.00
73-106 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, Hit Tunes (Lady singer), 2 piece set
7.00
73-107 V, VL, KS & KD200 Drum classification picture card, with title heading,
Plum, Rhythm and Blues (Trumpet player), 2 piece set
7.00
73-108 V, VL, KS & KD200 Drum classification picture card, with title heading,
Plum, Rhythm and Blues (Dancing couple), 2 piece set
7.00
73-109 V, VL, KS & KD200 Drum classification picture card, with title heading,
Orange, Country & Western (Cowboy playing guitar), 2 piece set
7.00
73-110 V, VL, KS & KD200 Drum classification picture card, with title heading,
Orange, Folk & Western (Cowboy playing guitar), 2 piece set
7.00
73-111 V, VL, KS & KD200 Drum classification picture card, with title heading,
Green, All Time Favorites (Lady & umbrella), 2 piece set
7.00
73-112 V, VL, KS & KD200 Drum classification picture card, with title heading,
Green, All Time Favorites (Lady, records & console record player), 2 pc. set
73-113 V, VL, KS & KD200 Drum classification picture card, with title heading,
Green, EP Albums, All Time Favorites (Lady, records & console), 2 pc. set
7.00
7.00
73-114 V, VL, KS & KD200 Drum classification picture card, with title heading,
Blue, Classics & Varieties (Pillar and Piano lid), 2 piece set
7.00
73-115 V, VL, KS & KD200 Drum classification picture card, with title heading,
Blue, Classics & Varieties (Orchestra conductor), 2 piece set
7.00
73-116 V, VL, KS & KD200 Drum classification picture card, with title heading,
Blue, Jazz (Saxophone player and musical notes), 2 piece set
7.00
73-117 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Hit Tunes, Singles (2 trombones), 2 piece set
7.00
73-118 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Hit Tunes, Albums (2 trombones), 2 piece set
7.00
73-119 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, R. and B., Singles (Street lamp), 2 piece set
7.00
73-120 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, R. and B., Albums (Street lamp), 2 piece set
7.00
73-121 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Jazz, Singles (3 Trumpet valves), 2 piece set
7.00
73-122 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Jazz, Albums (3 Trumpet valves), 2 piece set
7.00
73-125 V, VL, KS & KD200 Drum classification picture cards (5 pieces),
with title headings (5 pieces), Specify: any 5 two-piece sets, 10 pieces in all
73-130 V, VL, KS & KD200 Price inserts for program drum, Blue & White Arrow,
5¢ Per Selection, 6 singles – Quarter, (5 left & 5 right), 10 piece set
73-131 V, VL, KS & KD200 Price inserts for program drum, Blue & White Arrow,
10¢ Per Selection, 3 singles – Quarter, (5 left & 5 right), 10 piece set
73-132 V, VL, KS & KD200 Price inserts for program drum, Red & White Arrow
10¢ Two Tunes, Per EP Selection, 3 EPs – Quarter, (5 L. H & 5 R. H.), 10 pcs.
- 40 -
28.00
20.00
20.00
20.00
SEEBURG V200 of 1955 – 1956 and VL200 of 1956 – 1957 (Continued)
A-1 PART #
73-133 V, VL, KS & KD200 Price inserts for program drum, Red & White Arrow,
15¢ Two Tunes, EP Selection, 2 For Quarter, (5 left & 5 right), 10 piece set
$20.00
73-134 V, VL, KS & KD200 Price inserts for program drum, Blue Arrow on White,
10¢ Single Tune per selection, 3 Singles - Quarter, (5 left & 5 right), 10 pieces
20.00
73-135 V, VL, KS & KD200 Price inserts for program drum, Blue Arrow on White,
10¢ per Select., 3 Singles - Qtr, 7 Singles - Half Dollar, (5 L & 5 R), 10 pieces
20.00
73-136 V, VL, KS & KD200 Price inserts for program drum, Red Arrow on White,
15¢ per EP, 2 EPs - Qtr, 4 EPs & 1 Single - Half Dollar, (5 L & 5 R), 10 pieces
20.00
73-137 V, VL, KS & KD200 Price inserts for program drum, Blue script on White,
10¢ per Selection, 4 For Quarter, (All 10 are the same), 10 piece set
20.00
73-138 V, VL, KS & KD200 Price inserts for program drum, Blue script on White,
10¢ per Selection, 3 For Quarter, (All 10 are the same), 10 piece set
20.00
73-140 V, VL, KS & KD200 Price insert for program drum, choose any one piece,
Specify: Arrow or Script, Color and pricing, each piece
2.50
73-011 Letter & Number strips for the Program drum: A1, B1, C1, 20 piece set
83-020 Plastic Stripper plate (green), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-021 Stripper plate (green), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (See pages 14 & 16 in the manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-002 Trip coil for mechanism, Models B thru JL and V200 without 2050 tube
for trip, (This item is out of Stock at this time), each
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-023 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Model V200 with TSR1 receiver only, (This item not discountable)
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
- 41 -
25.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
65.00
7.00
20.00
7.00
14.00
25.00
25.00
35.00
98.50
98.50
SEEBURG V200 of 1955 – 1956 and VL200 of 1956 – 1957 (Continued)
A-1 PART #
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
68-010 Rivets, chrome plated, for selection playing plastic, (for Models B,
BL, C, G, W, R, J & VL200), 15 pcs.
73-143 Selection playing plastic, 1-pc., indicates letter & number of record playing,
black letters & numbers on white background, (A1 thru V0), with holes
68-011 Rivets, brass, for selection playing plastic, (Models JL & V200 only), 15 pcs.
21-003 Diffuser above grill, original shape, multi-colored, printed, for Model V-200 only
21-004 Diffuser above grill, original shape, multi-colored, printed, Model VL-200 only
21-007 Side window, plastic, round, convex, “Seeburg”, (green/white), V-200 only, ea.
21-008 Side window, plastic, round, convex, “Seeburg”, (white & tan), VL-200 only, ea.
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-008 Key for cabinet sides and back door, (not cash door), F314
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-054 Lock, 1 1/8” quality lock, & 2 keys for lower back door,
(rotates one-half turn and key is removable in locked and open positions)
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-009 I.D. plate, Model V, (as original), no serial number, for back of cabinet
81-010 I.D. plate, Model VL, (as original), no serial number, for back of cabinet
67-008 Lower back door U-wood frame, (this item does not include any metal parts
that were included with the original frame), (add $20. for pack. & shipping)
67-009 Masonite amp & receiver cover, (fits into lower back door U-wood frame)
68-002 Safety chain for Lower back door, w/chain cover, mounting screw & key clip
68-026 Screws, hold Amp. & Receiver on lower back door, (4) 1”, (4) ½”, 65¢ ea. or 8 pcs.
66-002 Decals, water transfer, for lower back door, (On/Off & Vol. Control), 2 pc. set
66-005 Decals, Vinyl, peel & stick, for lower back door, (On/Off & Vol. Control), 2 pc. set
92-039 Capacitor kit for Seeburg’s: J, JL, V & VL200, using Amplifier #: HFMA1-L6
includes schematics & replacement values reference sheet
81-035 Printed I.D. plate, (Record Compensation, Tone Balance, Serial #, etc.), for
HFMA1-L6, (High Fidelity Master Amplifier), 8 ¾” X 2 ⅞”, not discountable
92-054 Capacitor kit for TSR1-L6, Tormat Selection Recvr., includes: schematics &
replacement values reference sheet, (does not include cap. for wallboxes)
92-055 Capacitor kit for TSR3-L6, Tormat Selection Recvr., includes: schematics &
replacement values reference sheet, (does not include cap. for wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
37-009 Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
91-004 Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
37-014 Plug, two flat prongs, used in TSR1, 2 & 3, (J7 plug for reject switch)
72-003 Bulb, miniature #44 (selection indicator lamps) (2 required), each
72-008 Bulb, miniature #55 (credit lamps) (3), each
72-010 Bulb, miniature #63 (magazine ends “200”) (2), each
72-011 Bulb, miniature #81 (5 for button headings), (2 for cabinet sides “Seeburg”),
(Special: 10 or more # 81 Bulbs only $1.25 each) or each
70-007 Fluorescent lamp 20 watt 24” T12, daylight, (program drum) (1)
70-006 Fluorescent lamp 20 watt 24” T12, cool-white, optional color
70-011 Fluorescent lamp 25 watt 33" T12, daylight, (recommended color) (2), each
70-010 Fluorescent lamp 25 watt 33" T12, cool-white, (optional color)
- 42 -
$8.00
4.00
12.00
8.00
40.00
40.00
25.00
25.00
14.00
7.00
12.00
18.00
12.00
12.00
12.00
4.00
15.00
15.00
60.00
55.00
10.00
5.00
10.00
8.00
70.00
22.50
35.00
35.00
12.00
10.00
40.00
3.00
7.00
1.00
1.00
1.50
2.00
10.00
10.00
18.00
15.00
SEEBURG V200 of 1955 – 1956 and VL200 of 1956 – 1957 (Continued)
A-1 PART #
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$1.85
15.00
18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG KS200 & KD200 of 1957 100 Records (200 Selections)
(KS indicates a single pricing unit,
KD indicates a dual pricing unit)
A-1 PART #
80-034 Select-O-Matic 200 mechanism operation manual, for Seeburg KS200
and KD200 only, 26 pages, order R-48
80-038 Service manual & parts list for KS, KD & L100, 156 pages, order R-277
80-039 Installation, Operation manual & Troubleshooting guide for
Models KS, KD & L100, 60 pages, order R-225
80-040 KS, KD & L100, Purchase R-277 and R-225, Save $10.50, order R-277A
22-003 Lid glass, printed, (add $50 for packaging & shipping),
(This item not discountable & this item unavailable until further notice)
22-012 Decal, water transfer, for lid glass, HIGH Fidelity & musical note, 2 colors
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
22-001 Side glass, printed per pair, (add $30 for packaging & shipping)
(This item is out of stock at this time)
22-002 Side glass, printed, left side, (add $30 for packaging & shipping), each
22-007 Side glass, printed, right side, (add $30 for packaging & shipping), each
69-018 Mechanism cover, molded plastic, (Red-orange color molded in), for
Models: KS/KD, 161 and 201, medallions not included,
(This item is not discountable)
77-052 Glass logo for mech. cover, printed “SEEBURG”,
(gold leaf on back side), (This item is unavailable until further notice)
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
22-005 Instruction glass, left, (TO VIEW ENTIRE PROGRAM…), (for KS & KD200)
22-006 Coins and credit glass, right side , (make 10¢ selection only, etc.)
- 43 -
$20.00
42.50
30.50
62.50
75.00
10.00
9.00
140.00
75.00
75.00
150.00
60.00
8.00
1.00
15.00
18.00
SEEBURG KS200 & KD200 of 1957 (Continued)
A-1 PART #
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
73-009 Lens for button heading, located above selector switch arrow (5), each
73-010 Lenses for button heading, located above selector switch arrow, 5 piece set
73-105 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red Hit Tunes (Drummer), 2 piece set
73-106 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, Hit Tunes (Lady singer), 2 piece set
73-107 V, VL, KS & KD200 Drum classification picture card, with title heading,
Plum, Rhythm and Blues (Trumpet player), 2 piece set
$60.00
3.00
25.00
4.00
12.00
55.00
7.00
7.00
7.00
73-108 V, VL, KS & KD200 Drum classification picture card, with title heading,
Plum, Rhythm and Blues (Dancing couple), 2 piece set
7.00
73-109 V, VL, KS & KD200 Drum classification picture card, with title heading,
Orange, Country & Western (Cowboy playing guitar), 2 piece set
7.00
73-110 V, VL, KS & KD200 Drum classification picture card, with title heading,
Orange, Folk & Western (Cowboy playing guitar), 2 piece set
7.00
73-111 V, VL, KS & KD200 Drum classification picture card, with title heading,
Green, All Time Favorites (Lady & umbrella), 2 piece set
7.00
73-112 V, VL, KS & KD200 Drum classification picture card, with title heading,
Green, All Time Favorites (Lady, records & console record player), 2 pc. set
7.00
73-113 V, VL, KS & KD200 Drum classification picture card, with title heading,
Green, EP Albums, All Time Favorites (Lady, records & console), 2 pc. set
7.00
73-114 V, VL, KS & KD200 Drum classification picture card, with title heading,
Blue, Classics & Varieties (Pillar and Piano lid), 2 piece set
73-115 V, VL, KS & KD200 Drum classification picture card, with title heading,
Blue, Classics & Varieties (Orchestra conductor), 2 piece set
73-116 V, VL, KS & KD200 Drum classification picture card, with title heading,
Blue, Jazz (Saxophone player and musical notes), 2 piece set
73-117 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Hit Tunes, Singles (2 trombones), 2 piece set
73-118 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Hit Tunes, Albums (2 trombones), 2 piece set
73-119 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, R. and B., Singles (Street lamp), 2 piece set
7.00
7.00
7.00
7.00
7.00
7.00
73-120 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, R. and B., Albums (Street lamp), 2 piece set
7.00
73-121 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Jazz, Singles (3 Trumpet valves), 2 piece set
7.00
73-122 V, VL, KS & KD200 Drum classification picture card, with title heading,
Red, White & Blue, Singles, Jazz, Albums (3 Trumpet valves), 2 piece set
7.00
73-125 V, VL, KS & KD200 Drum classification picture cards (5 pieces),
with title headings (5 pieces), Specify: any 5 two-piece sets, 10 pieces in all
- 44 -
28.00
SEEBURG KS200 & KD200 of 1957 (Continued)
A-1 PART #
73-130 V, VL, KS & KD200 Price inserts for program drum, Blue & White Arrow,
5¢ Per Selection, 6 singles – Quarter, (5 left & 5 right), 10 piece set
$20.00
73-131 V, VL, KS & KD200 Price inserts for program drum, Blue & White Arrow,
10¢ Per Selection, 3 singles – Quarter, (5 left & 5 right), 10 piece set
20.00
73-132 V, VL, KS & KD200 Price inserts for program drum, Red & White Arrow
10¢ Two Tunes, Per EP Selection, 3 EPs – Quarter, (5 L. H & 5 R. H.), 10 pcs.
20.00
73-133 V, VL, KS & KD200 Price inserts for program drum, Red & White Arrow,
15¢ Two Tunes, EP Selection, 2 For Quarter, (5 left & 5 right), 10 piece set
20.00
73-134 V, VL, KS & KD200 Price inserts for program drum, Blue Arrow on White,
10¢ Single Tune per selection, 3 Singles - Quarter, (5 left & 5 right), 10 pieces
20.00
73-135 V, VL, KS & KD200 Price inserts for program drum, Blue Arrow on White,
10¢ per Select., 3 Singles - Qtr, 7 Singles - Half Dollar, (5 L & 5 R), 10 pieces
20.00
73-136 V, VL, KS & KD200 Price inserts for program drum, Red Arrow on White,
15¢ per EP, 2 EPs - Qtr, 4 EPs & 1 Single - Half Dollar, (5 L & 5 R), 10 pieces
20.00
73-137 V, VL, KS & KD200 Price inserts for program drum, Blue script on White,
10¢ per Selection, 4 For Quarter, (All 10 are the same), 10 piece set
73-138 V, VL, KS & KD200 Price inserts for program drum, Blue script on White,
10¢ per Selection, 3 For Quarter, (All 10 are the same), 10 piece set
73-140 V, VL, KS & KD200 Price insert for program drum, choose any one piece,
Specify: Arrow or Script, Color and pricing, each piece
73-011 Letter & Number strips for the Program drum: A1, B1, C1, 20 piece set
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (See page 14 of the installation manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
- 45 -
20.00
20.00
2.50
25.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
65.00
7.00
20.00
7.00
14.00
25.00
35.00
SEEBURG KS200 & KD200 of 1957 (Continued)
A-1 PART #
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
22-008 200 Select-0-Matic, round, printed glass, for mechanism ends, each
68-009 Rivets and back-up washers, chrome plated, for selection playing plastic,
(for Models KS/KD through 222), 15 rivets & 15 washers
73-143 Selection playing plastic, 1-pc., indicates letter & number of record playing,
black letters & numbers on white background, (A1 thru V0), without holes
22-004 Diffuser above grill, original shape, original blue & clear pattern, printed
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-009 Key for cabinet sides and back door, (not cash door), F313
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-011 I.D. plate for Models KD & KS are the same,
(as original), no serial number, for back of cabinet
95-001 Graphics for rear door, Blue, vinyl transfer, (Models KS200 & KD200 only),
“MASTER VOLUME CONTROL” & “MAIN SWITCH”, “RECORD REJECT”, per pr.
92-041 Capacitor kit: Seeburg Models KS & KD200 and L100, Amp. #: 25PAU-1,
includes schematics & replacement values reference sheet
93-001 Printed circuit board, PAU for Amp., (For KS, KD & L 100 only), limited stock
92-057 Capacitor & Resistor kit for TEU1, Tormat Electronic Unit, Seeburg Models:
KS KD200 and L100, includes schematic & replacement reference sheet
93-002 Printed circuit board, TEU for receiver, (For KS, KD & L 100 only), limited stock
93-003 Printed circuit board, TEU for receiver, (For Models KS, KD & L 100 only),
with all new components, tubes not included, tested, limited quantity
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
91-004 Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
90-061 Tube socket / connector socket, 7 pin ceramic pc mount for pc boards in
Seeburg Models KS200, KD200 and L100, each
90-062 Tube socket, 8 pin octal ceramic pc mount for holding 5U4, 6L6 & 2050
tubes in pc boards in Seeburg Models KS200, KD200 and L100, each
90-063 Tube socket / connector socket, 9 pin ceramic pc mount for pc boards in
Seeburg Models KS200, KD200 and L100, each
72-001 Bulb, miniature #12 (selection playing indicator) (1)
72-008 Bulb, miniature #55 (credit) (3), (grill ornaments) (3), each
72-011 Bulb, miniature #81 (5 for classification headings), (10 + $1.25 ea.) or each
72-015 Bulb, miniature #455 (flasher for grill ornaments) (3, optional), each
70-006 Fluorescent lamp 20 watt 24" T12, cool-white is recommended (1)
70-010 Fluorescent lamp 25 watt 33" T12, cool-white is recommended (2), each
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
- 46 -
$98.50
8.00
25.00
5.00
14.00
35.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
15.00
12.00
70.00
55.00
45.00
55.00
225.00
12.00
40.00
3.00
5.00
5.00
5.00
4.00
1.00
2.00
2.00
10.00
15.00
1.85
18.00
22.50
SEEBURG KS200 & KD200 of 1957 (Continued)
A-1 PART #
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG L100 of 1957 and
101 (Sometimes referred to as the L101) of 1958
50 Records (100 Selections)
A-1 PART #
80-038 Service manual & parts list for KS, KD & L100, 156 pages, order R-277
80-039 Installation, Operation manual & Troubleshooting guide for
Models KS, KD & L100, 60 pages, order R-225
80-040 KS, KD & L100, Purchase R-277 and R-225, Save $10.50, order R-277A
80-041 Illustrated parts catalog for Model L100 only, 42 pages, order R-1
80-042 KS, KD & L100, purchase R-277, R-225 and R-1, save $21.00, order R-1A
80-043 Service manual & parts list for 101, 161 & 201, 128 pages, order R-278
80-044 Installation, Operate manual & Trouble Shooting guide for Models
101, 161 & 201, 90 pages, order R-111
80-045 Seeburg 101, 161 & 201, purchase R-278 & R-111, save $10.50, order R-278A
80-046 Illustrated parts catalog for Model 101 only, 38 pages, order R-6
80-047 101, 161 & 201, purchase R-278, R-111 and R-6, save $24.50, order R-6A
23-005 Lid glass, L100 & 101, printed, (add $40 for packaging & shipping)
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
23-001 Side glass, L100 only, printed, per pair, (add $30 for pack. & ship.)
23-002 Side glass, L100 only, printed, left side, (add $30 for pack. & ship.), each
23-006 Side glass, L100 only, printed, right side, (add $30 for pack. & ship.), each
23-003 Side glass, L101 only, printed, per pair, (add $30 for packaging & shipping)
23-004 Side glass, L101 only, printed, left side, (add $30 for pack. & ship.), each
23-012 Side glass, L101 only, printed, right side, (add $30 for pack. & ship.), each
77-052 Glass logo for mech. cover, printed “SEEBURG”,
(gold leaf on back side), (This item is unavailable until further notice)
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
23-008 Program title glass, printed, (A1, A2, etc.), L 100 and 101 only
23-009 Instruction glass, left, (PRESS ONE LETTER KEY AND ONE NUMBER KEY)
23-010 Instruction glass, right, (3 PLAYS QUARTER – SELECT AFTER EACH COIN)
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
- 47 -
$42.50
30.50
62.50
26.00
78.00
40.00
37.00
66.50
27.00
79.50
75.00
9.00
135.00
75.00
75.00
135.00
75.00
75.00
60.00
8.00
1.00
45.00
13.50
13.50
60.00
SEEBURG L100 of 1957 and 101
(Sometimes referred to as the L101) of 1958 (Continued)
A-1 PART #
84-035
77-050
77-051
68-015
83-045
Specify #
83-004
83-001
83-002
83-003
83-035
84-001
84-002
84-003
84-004
84-015
84-025
74-009
83-007
78-010
83-010
83-011
78-003
Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
Select glass, Seeburg G, W, R, J, JL, L100 and 101, green
Select glass, Seeburg G, W, R, J, JL, L100 and 101, blue
Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
Plastic Stripper plate (clear), (with 6 stainless steel screws only)
Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
Brushes, stylus-cleaning, for plastic stripper plate, per pair
Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (See page 14 of the installation manual)
Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
Motor support plug, rubber, for under mechanism motor
Mechanism turntable drive bushings, Seeburg part # 245464, pair
Mechanism frame rubber bumper, Seeburg part # 245291, pair
Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
Springs for tone arm, hand made in the U.S.A., exact replacements, pair
Trip switch, Micro, for tone arm, (for Models B through APFEAI)
Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
Spring for mechanism reversing switch, (Models B thru STD4), handmade
Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
78-024 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: L100, 101, Q100 & Q160, (This item is not discountable)
23-011 100 Select-0-Matic glass, round, for mechanism ends, each
68-009 Rivets and back-up washers, chrome plated, for selection playing plastic,
(for Models KS/KD through 222), 15 rivets & 15 washers
23-007 Diffuser above grill, model L100, original shape and multi-colored, printed
pattern: Red, Blue, Green and Orange, (can also be used on model 101)
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-009 Key for cabinet sides and back door, (not cash door), F313
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
- 48 -
$3.00
6.50
6.50
25.00
4.00
12.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
65.00
7.00
20.00
7.00
14.00
25.00
35.00
8.00
98.50
25.00
5.00
37.50
14.00
7.00
12.00
18.00
12.00
12.00
SEEBURG L100 of 1957 and 101
(Sometimes referred to as the L101) of 1958 (Continued)
A-1 PART #
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
95-002 Graphics for rear upper cabinet, BLUE, vinyl transfer, (for Models L100,
101, 161, and 201), “SEEBURG SELECT-O-MATIC”
95-003 Graphics for rear door, BLUE, vinyl transfer, (Models L100, 101, 161, 201, 220
& 222), “MASTER VOLUME CONTROL” & “MAIN SWITCH”, “RECORD REJECT”
92-041 Capacitor kit: Seeburg Models KS & KD200 and L100, Amp. #: 25PAU-1,
includes schematics & replacement values reference sheet
93-001 Printed circuit board, PAU for Amp., (For KS, KD & L 100 only), limited stock
92-057 Capacitor & Resistor kit for TEU1, Tormat Electronic Unit, Seeburg Models:
KS KD200 and L100, includes schematic & replacement reference sheet
93-002 Printed circuit board, TEU for receiver, (For KS, KD & L 100 only), limited stock
93-003 Printed circuit board, TEU for receiver, (For Models KS, KD & L 100 only),
with all new components, tubes not included, tested, limited quantity
92-040 Capacitor kit: Seeburg Models 101, 161 and 201 using Amplifier #: HFMA2,
includes schematics & replacement values reference sheet
92-056 Capacitor kit: Seeburg Models 101, 161 and 201 using TSR6, includes:
Schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
91-004 Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
90-061 Tube socket / connector socket, 7 pin ceramic pc mount for pc boards in
Seeburg Models KS200, KD200 and L100, each
90-062 Tube socket, 8 pin octal ceramic pc mount for holding 5U4, 6L6 & 2050
tubes in pc boards in Seeburg Models KS200, KD200 and L100, each
90-063 Tube socket / connector socket, 9 pin ceramic pc mount for pc boards in
Seeburg Models KS200, KD200 and L100, each
72-001 Bulb, miniature #12 (selection playing indicator) (1)
72-008 Bulb, miniature #55 (credit lamp) (3), each
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended (1)
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
- 49 -
$18.00
4.00
10.00
12.00
70.00
55.00
45.00
55.00
225.00
70.00
35.00
12.00
40.00
3.00
5.00
5.00
5.00
4.00
1.00
15.00
18.00
1.85
18.00
22.50
1.75
12.00
7.50
9.00
6.50
3.00
8.00
SEEBURG 161 of 1958 80 Records (160 Selections)
A-1 PART #
80-043 Service manual & parts list for 101, 161 & 201, 128 pages, order R-278
80-044 Installation, Operate manual & Trouble Shooting guide for Models
101, 161 & 201, 90 pages, order R-111
80-045 Seeburg 101, 161 & 201, purchase R-278 & R-111, save $10.50, order R-278A
24-001 Lid glass, printed logo, (add $50 for packaging & shipping), not discountable
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
94-001 Side glass, Burnt Orange, (factory color), printed, per pair, (add $50 for
packaging & shipping), 161/201, (This item is not discountable)
94-002 Side glass, Burnt Orange, printed, left side, (add $50 for pack. & ship.), ea.
94-007 Side glass, Burnt Orange, printed, right side, (add $50 for pack./ship.), ea.
94-003 Side glass, Aqua, (requested color), printed, per pair, (add $50 for
packaging & shipping), 161/201, (This item is not discountable)
94-004 Side glass, Aqua, printed, left side, (add $50 for pack. & ship.), each
94-008 Side glass, Aqua, printed, right side, (add $50 for pack. & ship.), each
69-018 Mechanism cover, molded plastic, (Red-orange color molded in), for
Models: KS/KD, 161 and 201, medallions not included,
(This item is not discountable)
$40.00
37.00
66.50
75.00
9.00
220.00
125.00
125.00
220.00
125.00
125.00
150.00
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
77-019 Glass for Mech. cover w/printed logo, Models 161 & 201, (frame not included)
8.00
1.00
25.00
24-007 Program title glass, upper, (A5 thru V8 is printed on this glass)
45.00
24-008 Program title glass, lower, (A1 thru V4 is printed on this glass)
45.00
24-005 MUSIC FOR EVERYONE glass, (choose M.F.E. or EPA RECORDS, not both)
24-006 EP ALBUM RECORDS glass, (choose M.F.E. or EPA RECORDS, not both)
73-016 Price inserts, (5¢ per single, Quarter 6 singles),
for between title strip holders, $5.00 each or 4 pieces
73-017 Picture inserts, original pictures, (for use with 5¢ per single inserts only),
for between title strip holders, $5.00 each or 4 pieces
73-024 Price inserts and Picture inserts, for between title strip holders,
(5¢ per single, Quarter 6 singles), $5.00 each or complete 8 piece set
73-025 Price inserts, (10¢ per single, Quarter 3 singles, Half Dollar 7 singles),
for between title strip holders, $5.00 each or 4 pieces
73-026 Picture inserts, original pictures, (for use with 10¢ per single inserts only),
for between title strip holders, $5.00 each or 4 pieces
73-027 Price inserts and Picture inserts, for between title strip holders,
(10¢ per single, Quarter 3 singles, Half Dollar 7 singles), complete 8 pc. set
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (See page 14 of the installation manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
40.00
40.00
- 50 -
15.00
15.00
30.00
15.00
15.00
30.00
12.00
60.00
50.00
12.00
12.00
3.00
25.00
SEEBURG 161 of 1958 (Continued)
A-1 PART #
84-002
84-003
84-004
84-015
Motor support plug, rubber, for under mechanism motor
Mechanism turntable drive bushings, Seeburg part # 245464, pair
Mechanism frame rubber bumper, Seeburg part # 245291, pair
Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
68-009 Rivets and back-up washers, chrome plated, for selection playing plastic,
(for Models KS/KD through 222), 15 rivets & 15 washers
77-013 Credit & Instruction glass, left, (MAKE ANY SELECTION…)
77-014 Coins glass, right, (COINS NICKELS DIMES QUARTERS UP TO ONE DOLLAR
TOTAL – OR A HALF DOLLAR), for use with half dollar coin accepters
$3.00
10.00
5.00
25.00
75.00
65.00
7.00
20.00
7.00
14.00
25.00
35.00
98.50
8.00
5.00
18.00
10.00
77-025 Coins glass, right, (COINS NICKELS DIMES QUARTERS UP TO ONE
DOLLAR TOTAL, for use with coin accepters that do not accept half dollars
10.00
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
60.00
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
24-004 Diffuser above grill, original shape & printed blue and clear pattern
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-009 Key for cabinet sides and back door, (not cash door), F313
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
95-002 Graphics for rear upper cabinet, BLUE, vinyl transfer, (for Models L100,
101, 161, and 201), “SEEBURG SELECT-O-MATIC”
- 51 -
3.00
25.00
4.00
45.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
3.00
10.00
SEEBURG 161 of 1958 (Continued)
A-1 PART #
95-003 Graphics for rear door, BLUE, vinyl transfer, (Models L100, 101, 161, 201, 220
& 222), “MASTER VOLUME CONTROL” & “MAIN SWITCH”, “RECORD REJECT”
92-040 Capacitor kit: Seeburg Models 101, 161 and 201, using Amplifier #: HFMA2,
includes schematics & replacement values reference sheet
92-056 Capacitor kit: Seeburg Models 101, 161 and 201 using TSR6, includes:
Schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12 (selection playing indicator) (1)
72-008 Bulb, miniature #55 (credit lamp) (3) and (grill ornaments) (2), each
72-015 Bulb, miniature #455 (flasher for grill ornaments) (2, optional), each
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$12.00
70.00
35.00
12.00
4.00
1.00
2.00
15.00
18.00
1.85
18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG 201 of 1958 100 Records (200 Selections)
A-1 PART #
80-043 Service manual & parts list for 101, 161 & 201, 128 pages, order R-278
80-044 Installation, Operate manual & Trouble Shooting guide for Models
101, 161 & 201, 90 pages, order R-111
80-045 Seeburg 101, 161 & 201, purchase R-278 & R-111, save $10.50, order R-278A
25-001 Lid glass, printed logo, (add $50 for packaging & shipping), not discountable
25-010 Decal, for inside of Lid glass, water transfer, SELECT-O-MATIC Two Hundred
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
94-001 Side glass, Burnt Orange, (factory color), printed, per pair, (add $50 for
packaging & shipping), 161/201, (This item is not discountable)
94-002 Side glass, Burnt Orange, printed, left side, (add $50 for pack. & ship.), ea.
94-007 Side glass, Burnt Orange, printed, right side, (add $50 for pack./ship.), ea.
94-003 Side glass, Aqua, (requested color), printed, per pair, (add $50 for
packaging & shipping), 161/201, (This item is not discountable)
94-004 Side glass, Aqua, printed, left side, (add $50 for pack. & ship.), each
94-008 Side glass, Aqua, printed, right side, (add $50 for pack. & ship.), each
- 52 -
$40.00
37.00
66.50
75.00
8.00
9.00
220.00
125.00
125.00
220.00
125.00
125.00
SEEBURG 201 of 1958 (Continued)
A-1 PART #
69-018 Mechanism cover, molded plastic, (Red-orange color molded in), for
Models: KS/KD, 161 and 201, medallions not included,
(This item is not discountable)
$150.00
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
77-019 Glass for Mech. cover w/printed logo, Models 161 & 201, (frame not included)
8.00
1.00
25.00
25-007 Program title glass, upper, (A6 thru V0 is printed on this glass)
45.00
25-008 Program title glass, lower, (A1 thru V5 is printed on this glass)
45.00
25-004 MUSIC FOR EVERYONE glass, (choose M.F.E. or EPA RECORDS, not both)
25-006 EP ALBUM RECORDS glass, (choose M.F.E. or EPA RECORDS, not both)
73-016 Price inserts, (5¢ per single, Quarter 6 singles),
for between title strip holders, $5.00 each or 4 pieces
73-017 Picture inserts, original pictures, (for use with 5¢ per single inserts only),
for between title strip holders, $5.00 each or 4 pieces
73-024 Price inserts and Picture inserts, for between title strip holders,
(5¢ per single, Quarter 6 singles), $5.00 each or complete 8 piece set
73-025 Price inserts, (10¢ per single, Quarter 3 singles, Half Dollar 7 singles),
for between title strip holders, $5.00 each or 4 pieces
73-026 Picture inserts, original pictures, (for use with 10¢ per single inserts only),
for between title strip holders, $5.00 each or 4 pieces
73-027 Price inserts and Picture inserts, for between title strip holders,
(10¢ per single, Quarter 3 singles, Half Dollar 7 singles), complete 8 pc. set
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
83-004 Plastic Stripper plate (clear), complete with 2 stylus-cleaning brushes,
brush holders, and 6 screws, (all stainless steel hardware)
83-001 Plastic Stripper plate (clear), (with 6 stainless steel screws only)
83-002 Brush holders, hold stylus-cleaning brushes, (stainless steel), per pair
83-003 Brushes, stylus-cleaning, for plastic stripper plate, per pair
83-035 Stylus brush, Seeburg #405219, used to manually clean the styli
& the brushes on the stripper plate, (See page 14 of the installation manual)
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-009 Styli for original Pickering/Seeburg redhead cartridge, (.7 mil diamond tip
for all stereo & mono. records), (Out of Stock at this time), per pr.
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
50.00
50.00
- 53 -
15.00
15.00
30.00
15.00
15.00
30.00
12.00
60.00
50.00
12.00
12.00
3.00
25.00
3.00
10.00
5.00
25.00
75.00
65.00
7.00
20.00
7.00
14.00
25.00
SEEBURG 201 of 1958 (Continued)
A-1 PART #
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
68-009 Rivets and back-up washers, chrome plated, for selection playing plastic,
(for Models KS/KD through 222), 15 rivets & 15 washers
77-013 Credit & Instruction glass, left, (MAKE ANY SELECTION…)
25-009 Coins glass, right, (COINS SELECT AFTER EACH HALF DOLLAR QUARTER
DIME OR TWO NICKELS), for use with half dollar coin accepters, (201 only)
$35.00
98.50
8.00
5.00
18.00
10.00
25-012 Coins glass, right, (COINS SELECT AFTER EACH QUARTER – DIME OR TWO
NICKELS), for use w/coin accepters that do not accept half dollars, (201 only)
10.00
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
60.00
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
25-003 Diffuser above grill, original shape and printed blue and clear pattern
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-009 Key for cabinet sides and back door, (not cash door), F313
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
81-012 I.D. plate, Model 201, (as original), no serial number, for back of cabinet
95-002 Graphics for rear upper cabinet, BLUE, vinyl transfer, (for Models L100,
101, 161, and 201), “SEEBURG SELECT-O-MATIC”
95-003 Graphics for rear door, BLUE, vinyl transfer, (Models L100, 101, 161, 201, 220
& 222), “MASTER VOLUME CONTROL” & “MAIN SWITCH”, “RECORD REJECT”
92-040 Capacitor kit: Seeburg Models 101, 161 and 201, using Amplifier #: HFMA2,
includes schematics & replacement values reference sheet
92-056 Capacitor kit: Seeburg Models 101, 161 and 201 using TSR6, includes:
Schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12 (selection playing indicator) (1)
72-008 Bulb, miniature #55 (credit lamp) (3) and (grill ornaments) (3), each
72-015 Bulb, miniature #455 (flasher for grill ornaments) (3, optional), each
70-010 Fluorescent lamp 25 watt 33” T12, cool-white is recommended, (2), each
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
- 54 -
3.00
25.00
4.00
45.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
3.00
15.00
10.00
12.00
70.00
35.00
12.00
4.00
1.00
2.00
15.00
1.85
18.00
22.50
SEEBURG 201 of 1958 (Continued)
A-1 PART #
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG 220 of 1958 – 1959 50 Records (100 Selections)
A-1 PART #
80-049 Service & parts manual, Seeburg 220 & 222, 174 pages, order R-274
80-050 Installation, Operation manual, Trouble Shooting guide & Stereo system
information, Seeburg 220 & 222, 68 pages, order R-439
80-051 Seeburg 220 & 222, purchase R-274 & R-439, save $10.00, order R-274A
94-013 Lid glass, 3/16" plate, no printing – as original, (add $50 for packing
& shipping), 220/222 lid glass is not discountable, (Out of Stock)
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
66-008 Decal, Stereophonic, water transfer, gold, black & red, 6 3/8” x 1 3/4"
94-005 Side glass, exact reproductions, per pair, (add $50 for packing,
Insurance and shipping), (220/222 side glass is not discountable)
94-006 Side glass, left side, each, (add $50 for packaging & shipping), each
94-012 Side glass, right side, each, (add $50 for packaging & shipping), each
69-009 Mechanism cover, molded plastic, Pink color molded in, for 220 & 222,
Logo glass & glass frame not included, (This item is not discountable)
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
26-003 Program title glass, screen-printed as original
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
83-005 Stripper plate (clear), (some 220’s had a stripper plate)
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
- 55 -
$44.50
34.50
69.00
60.00
9.00
6.00
275.00
150.00
150.00
150.00
8.00
1.00
45.00
12.00
50.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
125.00
SEEBURG 220 of 1958 – 1959 (Continued)
A-1 PART #
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
95-004 Graphics for mechanism ends, Silver, vinyl transfer, (for Models 220 and
Q100 only), “HIGH FIDELITY” and “SELECT-O-MATIC”, 2 piece set
68-009 Rivets and back-up washers, chrome plated, for selection playing plastic,
(for Models KS/KD through 222), 15 rivets & 15 washers
77-013 Credit & Instruction glass, left, (MAKE ANY SELECTION…)
26-004 Pricing glass center, Model 220 only, "5¢ per, Quarter 6 singles"
26-005 Pricing glass center, Model 220 only, "10¢ per, Quarter 3 singles"
77-014 Coins glass, right, (COINS NICKELS DIMES QUARTERS UP TO ONE DOLLAR
TOTAL – OR A HALF DOLLAR), for use with half dollar coin accepters
$7.00
20.00
7.00
14.00
25.00
35.00
98.50
8.00
12.00
5.00
18.00
12.00
12.00
10.00
77-025 Coins glass, right, (COINS NICKELS DIMES QUARTERS UP TO ONE
DOLLAR TOTAL, for use with coin accepters that do not accept half dollars
10.00
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
60.00
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
73-031 Diffuser above grill, original shape and printed aqua and red pattern
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-010 Key for cabinet sides and back door, (not cash door), F264
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
95-005 Graphic for rear upper cabinet, BLUE, vinyl transfer,
(for Models 220 & 222 only), “SEEBURG STEREOPHONIC”
95-003 Graphics for rear door, BLUE, vinyl transfer, (Models L100, 101, 161, 201, 220
& 222), “MASTER VOLUME CONTROL” & “MAIN SWITCH”, “RECORD REJECT”
92-042 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA1,
includes schematics & replacement values reference sheet
92-070 Capacitor and Resistor kit: Seeburg Models 220, 222, Q100 & Q160, Amp.
# SHFA1, Includes schematics & replacement values reference sheet
- 56 -
3.00
25.00
4.00
45.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
10.00
12.00
85.00
120.00
SEEBURG 220 of 1958 – 1959 (Continued)
A-1 PART #
92-045 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA2,
includes schematics & replacement values reference sheet
92-002 Transistor 2N109, PNP Germanium, Seeburg # 308950, SHFA1 = 4 on top,
SHFA2 thru SHFA5 = 2 each are soldered in, on the underside, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
92-053 Capacitor kit for TSU1 thru TSU7, Tormat Selector Units, in Seeburg Models
220 thru DS160, includes schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12 (selection playing indicator) (1)
72-008 Bulb, miniature #55 (credit lamps) (3), each
72-010 Bulb, miniature #63 (grill ornament lamps) (2), each
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$80.00
7.00
40.00
3.00
37.00
12.00
4.00
1.00
1.50
15.00
18.00
1.85
18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG 222 of 1958 – 1959 80 Records (160 Selections)
A-1 PART #
80-049 Service & parts manual, Seeburg 220 & 222, 174 pages, order R-274
80-050 Installation, Operation manual, Trouble Shooting guide & Stereo system
information, Seeburg 220 & 222, 68 pages, order R-439
80-051 Seeburg 220 & 222, purchase R-274 & R-439, save $10.00, order R-274A
94-013 Lid glass, 3/16" plate, no printing – as original, (add $50 for packing
& shipping), 220/222 lid glass is not discountable
66-001 Cloud-shaped pricing decals, water transfer to inside of glass, 5 to choose
from, Specify: 1/5¢ Special 6/25¢; 2/10¢ Special 6/25¢; 2/10¢ Special 5/25¢;
1/10¢ Special 3/25¢ or Special 1 play for 25¢, (large size: 5” x 4”), each
66-008 Decal, Stereophonic, water transfer, gold, black & red, 6 3/8” x 1 3/4"
94-005 Side glass, exact reproductions, per pair, (add $50 for packaging,
Insurance and shipping), 220/222 side glass is not discountable
94-006 Side glass, left side, each, (add $50 for packaging & shipping), each
94-012 Side glass, right side, each, (add $50 for packaging & shipping), each
- 57 -
$44.50
34.50
69.00
60.00
9.00
6.00
275.00
150.00
150.00
SEEBURG 222 of 1958 – 1959 (Continued)
A-1 PART #
69-009 Mechanism cover, molded plastic, Pink color molded in, for 220 & 222,
Logo glass & glass frame not included, (This item is not discountable)
$150.00
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
27-001 Glass for mechanism cover, with printed logo, 222 only, (frame not included)
27-004 STEREOPHONIC glass, above upper program title glass
8.00
1.00
25.00
40.00
27-005 Program title glass, upper, 222 only, (A5 thru V8 is printed on this glass)
45.00
27-006 Program title glass, lower, 222 only, (A1 thru V4 is printed on this glass)
45.00
27-007 Price inserts, (10¢ per single, Quarter 3 singles, Half Dollar 7 singles),
for between title strip holders, $5.00 each or 4 pieces
27-008 Picture inserts, original pictures, between title strip holders, $5.00 ea. or 4 pcs.
27-009 Price inserts and Picture inserts, for between title strip holders,
(10¢ per single, Quarter 3 singles, Half Dollar 7 singles), complete 8 pc. set
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
78-005 Latch bar solenoid for Electrical Selector, all metal frame,
as original, (This item is out of stock at this time)
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
95-006 Graphics for mechanism ends, vinyl transfer, (for Model 222 only), Silver
“HIGH FIDELITY and SELECT-O-MATIC”, (1 of each), Silver “S”, (2) and
Pink “S”, (2), original style graphics, 6 piece set
68-009 Rivets and back-up washers, chrome plated, for selection playing plastic,
(for Models KS/KD through 222), 15 rivets & 15 washers
- 58 -
15.00
15.00
30.00
12.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
125.00
7.00
20.00
7.00
14.00
25.00
35.00
98.50
8.00
60.00
3.00
12.00
5.00
SEEBURG 222 of 1958 – 1959 (Continued)
A-1 PART #
77-013 Credit & Instruction glass, left, (MAKE ANY SELECTION…)
77-014 Coins glass, right, (COINS NICKELS DIMES QUARTERS UP TO ONE DOLLAR
TOTAL – OR A HALF DOLLAR), for use with half dollar coin accepters
77-025 Coins glass, right, (COINS NICKELS DIMES QUARTERS UP TO ONE
DOLLAR TOTAL, for use with coin accepters that do not accept half dollars
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
73-031 Diffuser above grill, original shape and printed aqua and red pattern
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-010 Key for cabinet sides and back door, (not cash door), F264
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-013 I.D. plate, Model 222, (as original), no serial number, for back of cabinet
95-005 Graphic for rear upper cabinet, BLUE, vinyl transfer,
(for Models 220 & 222 only), “SEEBURG STEREOPHONIC”
95-003 Graphics for rear door, BLUE, vinyl transfer, (Models L100, 101, 161, 201, 220
& 222), “MASTER VOLUME CONTROL” & “MAIN SWITCH”, “RECORD REJECT”
92-042 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA1,
includes schematics & replacement values reference sheet
92-070 Capacitor and Resistor kit: Seeburg Models 220, 222, Q100 & Q160, Amp.
# SHFA1, Includes schematics & replacement values reference sheet
92-045 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA2,
includes schematics & replacement values reference sheet
92-002 Transistor 2N109, PNP Germanium, Seeburg # 308950, SHFA1 = 4 on top,
SHFA2 thru SHFA5 = 2 each are soldered in, on the underside, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
92-053 Capacitor kit for TSU1 thru TSU7, Tormat Selector Units, in Seeburg Models
220 thru DS160, includes schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12 (selection playing indicator) (1)
72-008 Bulb, miniature #55 (credit lamps) (3), each
72-010 Bulb, miniature #63 (grill ornament lamps) (2), each
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
- 59 -
$18.00
10.00
10.00
25.00
4.00
45.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
15.00
10.00
12.00
85.00
120.00
80.00
7.00
40.00
3.00
37.00
12.00
4.00
1.00
1.50
15.00
18.00
1.85
18.00
22.50
SEEBURG 222 of 1958 – 1959 (Continued)
A-1 PART #
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG Q100 of 1959 – 1960 (Sometimes referred to as the AQ100)
50 Records (100 Selections)
A-1 PART #
80-052 Service & parts manual, Seeburg Q100 & Q160, 128 pages, order R-162
80-053 Installation, Operation manual, Trouble Shooting guide &
Cabinet Parts, Seeburg Q100 & Q160, 76 pages, order R-424
80-054 Seeburg Q100 & Q160, purchase R-162 & R-424, save $7.00, order R-162A
28-001 Upper lid glass, (Q100 only), “Seeburg HIGH FIDELITY”, (add $20 for shipping)
28-002 Lower lid glass, Q100 only, (add $50 for pack. & shipping of lower or both)
77-020 Make Any Selection glass, left side
77-015 Pricing glass, center, Q100 only, 10¢ per selection, Quarter 3 selections
77-016 Pricing glass, center, Q100 only, 10¢ per sel., Quarter 3 sel., ½ Dollar 7 sel.
77-017 Coins glass, right side
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
- 60 -
$40.00
35.00
68.00
140.00
145.00
10.00
15.00
15.00
10.00
25.00
4.00
12.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
125.00
7.00
20.00
7.00
14.00
25.00
SEEBURG Q100 of 1959 – 1960 (Continued)
A-1 PART #
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-024 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: L100, 101, Q100 & Q160, (This item is not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
95-004 Graphics for mechanism ends, Silver, vinyl transfer, (for Models 220 and
Q100 only), “HIGH FIDELITY” and “SELECT-O-MATIC”, 2 piece set
73-060 Diffuser above front grill, (silk-screened, all blue, as original)
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-010 Key for cabinet sides and back door, (not cash door), F264
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-014 I.D. plate, Models: Q100 and Y100, (as original, Q or Y is not printed
on this I.D. plate), no serial number, for back of cabinet
95-010 Graphic for rear upper cabinet, White, vinyl transfer,
(for Models Q100 and Q160 only), “SEEBURG”
95-011 Graphics for lower rear door, White, vinyl transfer,
(for Models Q100, and Q160 only), “MASTER VOLUME CONTROL”
and “MAIN SWITCH”, “RECORD REJECT”, 2 piece set
92-042 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA1,
includes schematics & replacement values reference sheet
92-070 Capacitor and Resistor kit: Seeburg Models 220, 222, Q100 & Q160, Amp.
# SHFA1, Includes schematics & replacement values reference sheet
92-045 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA2,
includes schematics & replacement values reference sheet
92-002 Transistor 2N109, PNP Germanium, Seeburg # 308950, SHFA1 = 4 on top,
SHFA2 thru SHFA5 = 2 each are soldered in, on the underside, each
91-004 Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
92-053 Capacitor kit for TSU1 thru TSU7, Tormat Selector Units, in Seeburg Models
220 thru DS160, includes schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12, selection playing indicator (1) and
under mechanism cover logo (1), each
72-008 Bulb, miniature #55 (credit lamp) (1)
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
- 61 -
$35.00
98.50
8.00
3.00
12.00
15.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
15.00
10.00
12.00
85.00
120.00
80.00
7.00
40.00
40.00
3.00
37.00
12.00
4.00
1.00
15.00
18.00
1.85
SEEBURG Q100 of 1959 – 1960 (Continued)
A-1 PART #
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
68-004 Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
68-005 Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
$18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG Q160 of 1959 – 1960 (Sometimes referred to as the AQ160)
80 Records (160 Selections)
A-1 PART #
80-052 Service & parts manual, Seeburg Q100 & Q160, 128 pages, order R-162
80-053 Installation, Operation manual, Trouble Shooting guide &
Cabinet Parts, Seeburg Q100 & Q160, 76 pages, order R-424
80-054 Seeburg Q100 & Q160, purchase R-162 & R-424, save $6.00, order R-162A
29-001 Upper lid glass, Q160, “Seeburg PRESENTS IN 33⅓ STEREO, ARTIST OF
THE WEEK”, (add $50 for packaging & shipping of upper or both glasses)
29-002 Lower lid glass, Q160, (add $50 for pack. & shipping of lower glass only)
77-020 Make Any Selection glass, left side
77-017 Coins glass, right side
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
Specify # Title headings for Seeburg program holders, Specify: a color and the
A-1 Part # from the list on page 18, (12 piece assortment)
29-003 Price card insert for program title board (10¢ per, Quarter 3, half dollar 7)
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring-for mechanism reversing switch, (Models B thru STD4), handmade
- 62 -
$40.00
35.00
68.00
150.00
140.00
10.00
10.00
25.00
4.00
12.00
8.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
125.00
7.00
20.00
7.00
14.00
SEEBURG Q160 of 1959 – 1960 (Continued)
A-1 PART #
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-024 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: L100, 101, Q100 & Q160, (This item is not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
95-009 Graphics for mechanism ends, Silver, vinyl transfer, (for Model Q160 only),
“HIGH FIDELITY” and “SELECT-O-MATIC”, 2 piece set
73-060 Diffuser above front grill, (silk-screened, all blue, as original)
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
76-010 Key for cabinet sides and back door, (not cash door), F264
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
95-010 Graphic for rear upper cabinet, White, vinyl transfer,
(for Models Q100 and Q160 only), “SEEBURG”
95-011 Graphics for lower rear door, White, vinyl transfer,
(for Models Q100, and Q160 only), “MASTER VOLUME CONTROL”
and “MAIN SWITCH”, “RECORD REJECT”, 2 piece set
92-042 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA1,
includes schematics & replacement values reference sheet
92-070 Capacitor and Resistor kit: Seeburg Models 220, 222, Q100 & Q160, Amp.
# SHFA1, Includes schematics & replacement values reference sheet
92-045 Capacitor kit: Seeburg Models 220, 222, Q100 & Q160, Amp. #: SHFA2,
includes schematics & replacement values reference sheet
92-002 Transistor 2N109, PNP Germanium, Seeburg # 308950, SHFA1 = 4 on top,
SHFA2 thru SHFA5 = 2 each are soldered in, on the underside, each
91-004 Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
92-053 Capacitor kit for TSU1 thru TSU7, Tormat Selector Units, in Seeburg Models
220 thru DS160, includes schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12, selection playing indicator (1) and
under mechanism cover logo (1), each
- 63 -
$25.00
35.00
98.50
8.00
3.00
10.00
15.00
14.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
10.00
12.00
85.00
120.00
80.00
7.00
40.00
40.00
3.00
3.00
3.00
37.00
12.00
4.00
SEEBURG Q160 of 1959 – 1960 (Continued)
A-1 PART #
72-008
70-008
70-009
70-050
68-005
Bulb, miniature #55 (credit lamp) (1)
Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
Toggle switch, (Main on-off switch), excellent replacement, for all models
Caster sockets, use with original Seeburg metal casters or our 2 ½” hard
rubber replacement casters, (made by original supplier to Seeburg), each
Casters 2 ½” hard rubber, (made by original supplier to Seeburg), each
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
71-006
71-035
71-024
71-028
71-016
71-040
71-033
78-015
68-004
$1.00
15.00
18.00
1.85
18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
3.00
8.00
SEEBURG AY100, Y100 & AY100U 50 Records (100 Selections) and
AY160, Y160 & AY160U 80 Records (160 Selections)
manufactured 1960 – 1961
A-1 PART #
80-055 Service, Installation & Operation manual,
Seeburg Models AY100 & AY160, 186 pages, order R-273
80-056 Trouble Shooting Guide, Seeburg AY100 & AY160, 54 pages, order R-329
80-057 Seeburg AY100/AY160, purchase R-273 & R-329, save $8.00, order R-273A
30-001 Upper lid glass, AY100 &160 "Artist of the Week", (add $20 for pack & ship.)
73-062 Plastic Insert, “Seeburg” logo, printed red, for upper Artist of the Week lid glass
30-003 Upper lid glass, AY100 &160 “STEREOPHONIC”,
Replaces the “Artist of the Week” glass, (add $20 for packaging & shipping)
30-004 Lower lid glass AY100 (add $50 for pack. & ship. lower or both)
30-005 Lower lid glass AY160 (add $50 for pack. & ship. lower or both)
77-020 Make Any Selection glass, left side
77-022 Pricing glass, center, AY100/160 only, 10¢ per selection, Quarter 3 selections
77-023 Pricing glass, center, (for Models AY100 and AY160 only),
"Quarter 3 selections, 10¢ per selection, Half Dollar 7 selections”
77-017 Coins glass, right side
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, for under coin-reject plunger-button, Seeburg Models G thru APFEAI)
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
- 64 -
$45.00
32.00
69.00
120.00
12.00
125.00
140.00
140.00
10.00
15.00
15.00
10.00
25.00
4.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
SEEBURG AY100, Y100 & AY100U and AY160, Y160 & AY160U
manufactured 1960 – 1961 (Continued)
A-1 PART #
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
$125.00
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-015 Spring, for original SP/ST – momentary slide, part of the service switch
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
25.00
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
35.00
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
30-006 Medallion, round, Aluminum, for cabinet sides, original shape, printed, (2), ea.
73-018 Crown for front grill, original shape, but one color, not chromed (3), each
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
53-001 Kick plate, front – center, Stainless steel, Models AY & DS only, with holes
76-010 Key for cabinet sides and back door, (not cash door), F264
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
81-014 I.D. plate, Models: Q100 and Y100, (as original, Q or Y is not printed
on this I.D. plate), no serial number, for back of cabinet
81-016 I.D. plate, Model AY160U, (as original), no serial number, for back of cabinet
95-007 Graphic for rear upper cabinet, Silver, vinyl transfer, (for Models AY100,
AY160, DS100 and DS160 only), “SEEBURG”
95-008 Graphics for lower rear door, Silver, vinyl transfer, (AY & DS), “MASTER VOL.“
and “MAIN SWITCH”, “RECORD REJECT”, 2 piece set
91-004 Volume control pot. Models J/JL, V/VL, KS/KD, L100/101, Q & AY (mono.)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
92-046 Capacitor kit: Seeburg’s, Any: AY, Y or AY-U Models using Amplifier #: SHFA3,
includes schematics & replacement values reference sheet
92-047 Capacitor kit: Seeburg’s, Any: AY, Y or AY-U Models using Amplifier #: SHFA4,
includes schematics & replacement values reference sheet
92-048 Capacitor kit: Seeburg Models DS100 and DS160, using Amplifier #: SHFA5,
includes schematics & replacement values reference sheet
- 65 -
7.00
20.00
7.00
14.00
6.00
6.00
98.50
8.00
3.00
25.00
25.00
14.00
60.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
15.00
15.00
10.00
12.00
40.00
3.00
3.00
3.00
80.00
80.00
80.00
SEEBURG AY100, Y100 & AY100U and AY160, Y160 & AY160U
manufactured 1960 – 1961 (Continued)
A-1 PART #
92-002 Transistor 2N109, PNP Germanium, Seeburg # 308950, SHFA1 = 4 on top,
SHFA2 thru SHFA5 = 2 each are soldered in, on the underside, each
92-053 Capacitor kit for TSU1 thru TSU7, Tormat Selector Units, in Seeburg Models
220 thru DS160, includes schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12, selection playing indicator (1), and
under mechanism cover logo (2), each
72-008 Bulb, miniature #55 (credit lamp) (1)
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
90-
$7.00
37.00
12.00
4.00
1.00
15.00
18.00
1.85
18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG DS100 of 1961 – 1962 50 Records (100 Selections) and
DS160 of 1961 – 1962 80 Records (160 Selections)
A-1 PART #
80-058 Service & parts manual and Trouble Shooting charts, (all in one manual),
Seeburg Models DS100 and DS160, 216 pages, order R-299
31-002 Upper lid glass, DS100 &160 "Artist of the Week", (add $20 for pack & ship.)
73-064 Plastic Insert, “Seeburg” logo, printed blue, for upper Artist of the Week glass
31-004 Upper lid glass, DS100 & 160 “STEREOPHONIC”,
Replaces “Artist of the Week” glass, (add $20 for packaging & shipping)
31-005 Lower lid glass, DS 100, (add $50 for pack. & ship. for lower or upper & lower)
31-006 Lower lid glass, DS 160, (add $50 for pack. & ship. for lower or upper & lower)
77-020 Make Any Selection glass, left side
77-021 Pricing glass, center, (blue & black, for Models DS100 and DS160 only),
"Quarter 3 selections, 10¢ per selection, Half Dollar 7 selections”
77-017 Coins glass, right side
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
- 66 -
$48.50
120.00
12.00
125.00
140.00
140.00
10.00
15.00
10.00
25.00
4.00
12.00
25.00
3.00
10.00
5.00
SEEBURG DS100 and DS160 of 1961 – 1962 (Continued)
A-1 PART #
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
$25.00
75.00
125.00
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-015 Spring, for original SP/ST – momentary slide, part of the service switch,
can be replaced without removing switch or re-soldering wires, (AY thru LS2)
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
78-003 Trip coil for mechanism, Models V200 with 2050 tube for trip
through DS160, (This item is out of Stock at this time), each
25.00
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
35.00
78-022 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: V200 with TSR3 receiver, VL200, KS & KD200, 161, 201,
220, 222, AY100, AY160, DS100 and DS160, (This item not discountable)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
73-018 Crown for front grill, original shape, but one color, not chromed (1)
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160, 36” X 30”
53-001 Kick plate, front – center, Stainless steel, Models AY and DS only
76-010 Key for cabinet sides and back door, (not cash door), F264
67-004 Cash bag, (duck cloth, as original, hand made in the U.S.A.)
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-058 Lock, 1 1/8” quality lock, hardware & 2 keys for lower back door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
95-007 Graphic for rear upper cabinet, Silver, vinyl transfer, (for Models AY100,
AY160, DS100 and DS160 only), “SEEBURG”
95-008 Graphics for lower rear door, Silver, vinyl transfer, (for Models AY100,
AY160, DS100 and DS160), “MASTER VOLUME CONTROL” and
“MAIN SWITCH”, “RECORD REJECT”, 2 piece set
92-048 Capacitor kit: Seeburg Models DS100 and DS160, using Amplifier #: SHFA5,
includes schematics & replacement values reference sheet
92-002 Transistor 2N109, PNP Germanium, Seeburg # 308950, SHFA1 = 4 on top,
SHFA2 thru SHFA5 = 2 each are soldered in, on the underside, each
92-053 Capacitor kit for TSU1 thru TSU7, Tormat Selector Units, in Seeburg Models
220 thru DS160, includes schematics & replacement values reference sheet,
(does not include the capacitor for the Stepper that operates wallboxes)
- 67 -
7.00
20.00
7.00
14.00
6.00
6.00
98.50
8.00
3.00
25.00
14.00
60.00
7.00
12.00
18.00
12.00
12.00
18.00
4.00
3.00
3.00
10.00
12.00
80.00
7.00
37.00
SEEBURG DS100 and DS160 of 1961 – 1962 (Continued)
A-1 PART #
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
72-001 Bulb, miniature #12, selection playing indicator (1), and
under mechanism cover logo (2), each
72-008 Bulb, miniature #55 (credit lamp) (1)
70-008 Fluorescent lamp 25 watt 28" T12, cool-white is recommended, (2), each
70-009 Fluorescent lamp 25 watt 28" T12, daylight, (optional color)
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
71-033 Outlet, 3-wire grounded duplex receptacle, (The WSR3, 5 or 7, TSR1–6
or TSU1–7 plugs into this and this is for a 2 or 3 wire line cord), brown
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
90-
$12.00
4.00
1.00
15.00
18.00
1.85
18.00
22.50
45.00
1.75
12.00
7.50
9.00
6.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
SEEBURG LPC1 of 1962 – 1964 and LPC480 of 1964 – 1965
80 Records (160 Selections)
A-1 PART #
80-125 Service manual, Seeburg Model LPC1, 108 pages, order R-249
80-126 Installation, Operation & Trouble Shooting charts,
Seeburg Model LPC1, 76 pages, order R-255
80-127 Seeburg LPC1, purchase R-249 and R-255, save $9.00, order R-249A
80-130 Complete, all in one manual, Seeburg LPC480, 236 pages, order R-298
$39.50
33.00
63.50
52.50
73-045 Left keyboard Pricing, (albums: 1/2 Dollar or 2 Quarters per album / 10¢ per, Quarter 3,
1/2 Dollar 6 selections), plastic insert & clear glass, original colors for LPC1, (blue, red & blk.)
15.00
Other denominations of Left keyboard pricing inserts are available, please call
73-046 Right keyboard plastic, Select Any Single or Select any LP Album and
COINS, (NICKELS, DIMES, QUARTERS, HALF DOLLARS UP TO ONE DOLLAR TOTAL
plastic insert & clear glass, original colors for LPC1, (white, blue, red & black)
73-055 Seeburg models: LPC1 through LS2, labels for program title-holders,
(Letters and numbers, A1 thru V8), original font, peal and stick, 10 piece set
68-015 Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
83-045 Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
- 68 -
15.00
8.00
25.00
4.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
SEEBURG LPC1 of 1962 – 1964 & LPC480 of 1964 – 1965 (Continued)
A-1 PART #
84-038 Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
74-010 Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-015 Spring, for original SP/ST – momentary slide, part of the service switch,
can be replaced without removing switch or re-soldering wires, (AY thru LS2)
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-026 Free Play Credit Unit, completely bypasses the original credit unit, for
Seeburg Models: LPC1, LPC1R & LPC480, (This item is not discountable)
78-030 Bakelite & metal latch lever for mechanism reversing relay, pictured on pgs.
2505 & 2506 in service manual, (new original stock), limited quantity
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
65-002 Grill cloth, Specify: black or other color listed on page 86
under GRILL CLOTH, cloth size 30” X 40”, each
76-011 Key for cabinet sides, (not cash door), F278
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
92-058 Capacitor kits for Amplifiers used in Seeburg Models: LPC1 through
USC2, Specify: Amplifier # TSA1 through TSA10, each kit includes:
Schematics and replacement values reference sheet, each kit
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
92-059 Capacitor kit for TCC1, used in Seeburg Models: LPC1 and LPC480,
includes Schematics and replacement values reference sheet
92-060 Capacitor kit for 45TASU1, used in Seeburg Models: LPC1 and LPC480,
includes Oil Filled cap, Schematics & replacement values reference sheet
92-025 Capacitor for Stepper, operates wallboxes in Seeburg’s: M100A thru LPC480
92-105 Capacitor for Auto-Speed units: Seeburg’s: LPC1/480, PFEAIU, APFEAI & SS160
91-009 Potentiometer for Solid State Auto-Speed Unit 45TASU1 and 45TASU2,
Seeburg # 307625, has a convenient shaft for adjusting the speed
72-002 Bulb, for LPC1, miniature #19, (selection playing indicator), replaces
Seeburg original #15 bulb (1)
- 69 -
$1.00
125.00
7.00
20.00
7.00
14.00
6.00
6.00
35.00
124.50
10.00
8.00
3.00
18.00
7.00
18.00
12.00
12.00
4.00
75.00
20.00
40.00
3.00
3.00
3.00
35.00
37.00
12.00
12.00
12.00
4.00
SEEBURG LPC1 of 1962 – 1964 & LPC480 of 1964 – 1965 (Continued)
A-1 PART #
72-002
72-008
72-020
70-012
70-050
71-010
71-016
71-040
78-015
Bulb, for LPC480, miniature #19, (selection playing indicator), (2), each
Bulb, miniature #55 (credit lamps) (2), each
Bulb, some LPC480 models only, #93 (album facsimile pictures), (16), each
Fluorescent lamp 30 watt 36" T8, cool-white, (recommended color) (2), each
Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
Toggle switch, (Main on-off switch), excellent replacement, for all models
90-
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
71-008
$4.00
1.00
2.50
15.00
1.85
30.00
1.75
12.00
7.50
6.50
SEEBURG PFEAIU “Electra” & APFEAI “Fleetwood” of 1965 – 1966
80 Records (160 Selections)
A-1 PART #
80-059
80-060
80-061
32-001
73-045
73-046
73-055
68-015
83-045
83-006
84-001
84-002
84-003
84-004
84-015
84-025
84-038
74-010
Service manual & parts list, PFEAIU & APFEAI, 108 pages, order R-268
Install., Operate. & Trouble guide, PFEAIU & APFEAI, 70 pages, order R-330
PFEAIU & APFEAI, purchase R-268 & R-330, save $9.00, order R-268A
Front glass, printed black & white street scene, (add $50 for pack. & ship.)
Left keyboard Pricing, (albums: 1/2 Dollar or 2 Quarters per album / 10¢ per, Quarter 3,
$39.00
33.00
63.00
80.00
1/2 Dollar 6 selections), plastic insert & clear glass, original colors for LPC1, (blue, red & blk.)
15.00
Other denominations of Left keyboard pricing inserts are available, please call
Right keyboard plastic, Select Any Single or Select any LP Album and
COINS, (NICKELS, DIMES, QUARTERS, HALF DOLLARS UP TO ONE DOLLAR TOTAL
plastic insert & clear glass, original colors for LPC1, (white, blue, red & black)
Seeburg models: LPC1 through LS2, labels for program title-holders,
(Letters and numbers, A1 thru V8), original font, peal and stick, 10 piece set
Coin reject plunger, plated, with scavenger wire, (Models G thru APFEAI)
Spring, plunger return, for under coin-reject plunger-button, Seeburg
part # 401223, for Models HF100G thru APFEAI only
Brushes, stylus-cleaning, double sided
Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
Motor support plug, rubber, for under mechanism motor
Mechanism turntable drive bushings, Seeburg part # 245464, pair
Mechanism frame rubber bumper, Seeburg part # 245291, pair
Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
Styli, T shaped, for original Pickering/Seeburg cartridges, (.7 mil diamond tip
for all stereo & mono. records), (Unavailable until further notice), per pair
83-007 Springs for tone arm, hand made in the U.S.A., exact replacements, pair
78-010 Trip switch, Micro, for tone arm, (for Models B through APFEAI)
83-010 Balance spring for Micro trip switch, for tone arm, made in the U.S.A.,
original Seeburg part # 245817, (for Models B through APFEAI)
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-015 Spring, for original SP/ST – momentary slide, part of the service switch,
can be replaced without removing switch or re-soldering wires, (AY thru LS2)
- 70 -
15.00
8.00
25.00
4.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
1.00
125.00
7.00
20.00
7.00
14.00
6.00
SEEBURG PFEAIU “Electra” &
APFEAI “Fleetwood” of 1965 – 1966 (Continued)
A-1 PART #
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
78-030 Bakelite & metal latch lever for mechanism reversing relay, pictured on pgs.
2505 & 2506 in service manual, (new original stock), limited quantity
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
65-018 Grill cloth, 30" x 40", black burlap, other colors of burlap
are listed on page 86 under GRILL CLOTH, each
76-013 Key for cabinet sides, (not cash door), F336
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
92-058 Capacitor kits for Amplifiers used in Seeburg Models: LPC1 through
USC2, Specify: Amplifier # TSA1 through TSA10, each kit includes:
Schematics and replacement values reference sheet, each kit
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
76-001 Volume control key for original pots., (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
92-061 Capacitor kit for SCC3 used in Seeburg’s: PFEAIU and SS160, includes:
Schematics and replacement values reference sheet
92-062 Capacitor kit for SCC4 used in Seeburg APFEAI, includes:
Schematics and replacement values reference sheet
92-022 Silicon control switch, replaces Seeburg part #s: 309377 & 309472, found
in SCC1 thru SCC9, (Models U-100 thru SB100), not digital models, each
92-063 Capacitor kit for 45TASU2 used in Models: PFEAIU, APFEAI and SS160,
includes: Oil Filled cap, Schematics & replacement values reference sheet
92-105 Capacitor for Auto-Speed units: Seeburg’s: LPC1/480, PFEAIU, APFEAI & SS160
91-009 Potentiometer for Solid State Auto-Speed Unit 45TASU1 and 45TASU2,
Seeburg # 307625, has a convenient shaft for adjusting the speed
72-002 Bulb, miniature #19 (selection playing indicator) (2), each
72-008 Bulb, miniature #55 (credit lamps) (2), each
70-012 Fluorescent lamp 30 watt 36" T8, cool-white, (recommended color) (1)
70-014 Fluorescent lamp 30 watt 36" T8, black light bulbs are recommended (2), ea.
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot, with molded plug
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
- 71 -
$6.00
35.00
10.00
8.00
3.00
18.00
7.00
18.00
12.00
12.00
4.00
75.00
20.00
40.00
3.00
3.00
3.00
32.50
42.50
12.00
37.00
12.00
12.00
4.00
1.00
15.00
30.00
30.00
1.75
12.00
7.50
6.50
SEEBURG SS160 “Stereo Showcase” of 1966 – 1967
80 Records (160 Selections)
A-1 PART #
80-062
80-063
80-064
33-001
Service, Installation & Operation manual, SS160, 160 pages, order R-297
Trouble Shooting Guide, Seeburg SS160, 48 pages, order R-212
Seeburg SS160, purchase R-297 & R-212, save $10.00, order R-297A
Front glass, all colors and graphics have been meticulously reproduced and
printed as original, Note: 17 different ink screens are used to manufacture
this part, (add $25 for packing, & shipping), (this item is not discountable)
33-002 Side glass, left side, shades of red, all colors and graphics are printed
as original, (this item is not discountable)
33-003 Side glass, right side, shades of blue, all colors and graphics are printed
as original, (this item is not discountable)
$45.00
30.00
65.00
175.00
50.00
50.00
73-045 Left keyboard Pricing, (albums: 1/2 Dollar or 2 Quarters per album / 10¢ per, Quarter 3,
1/2 Dollar 6 selections), plastic insert & clear glass, original colors for LPC1, (blue, red & blk.)
15.00
Other denominations of Left keyboard pricing inserts are available, please call
73-046 Right keyboard plastic, Select Any Single or Select any LP Album and
COINS, (NICKELS, DIMES, QUARTERS, HALF DOLLARS UP TO ONE DOLLAR TOTAL
plastic insert & clear glass, original colors for LPC1, (white, blue, red & black)
73-055 Seeburg models: LPC1 through LS2, labels for program title-holders,
(Letters and numbers, A1 thru V8), original font, peal and stick, 10 piece set
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-038 Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
74-008 Styli, wedge shaped, for all original Pickering/Seeburg cartridges including
#345-03D, (.7 mil diamond tip for all stereo and mono. records),
(This item is not discountable, at this price), per pair
83-008 Springs for tone arm, long “U” on one end, hand made in the U.S.A., pair
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-015 Spring, for original SP/ST – momentary slide, part of the service switch,
can be replaced without removing switch or re-soldering wires, (AY thru LS2)
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
83-009
84-035
76-013
67-012
Carriage roller for mechanism, Seeburg part # 245082, each
Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
Key for cabinet sides, (not cash door), F336
Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
- 72 -
15.00
8.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
1.00
30.00
7.00
14.00
6.00
6.00
35.00
8.00
3.00
7.00
18.00
12.00
12.00
4.00
SEEBURG SS160 “Stereo Showcase” of 1966 – 1967 (Continued)
A-1 PART #
92-058 Capacitor kits for Amplifiers used in Seeburg Models: LPC1 through
USC2, Specify: Amplifier # TSA1 through TSA10, each kit includes:
Schematics and replacement values reference sheet, each kit
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
92-061 Capacitor kit for SCC3 used in Seeburg’s: PFEAIU and SS160, includes:
Schematics and replacement values reference sheet
92-022 Silicon control switch, replaces Seeburg part #s: 309377 & 309472, found
in SCC1 thru SCC9, (Models U-100 thru SB100), not digital models, each
92-063 Capacitor kit for 45TASU2 used in Models: PFEAIU, APFEAI and SS160,
includes: Oil Filled cap, Schematics & replacement values reference sheet
92-105 Capacitor for Auto-Speed units: Seeburg’s: LPC1/480, PFEAIU, APFEAI & SS160
91-009 Potentiometer for Solid State Auto-Speed Unit 45TASU1 and 45TASU2,
Seeburg # 307625, has a convenient shaft for adjusting the speed
72-002 Bulb, miniature #19 (selection playing) (2) & (credit lamps, use 1 or both), each
72-007 Bulb, miniature #53 (illuminates the popularity meter area) (2), each
70-012 Fluorescent lamp 30 watt 36” T8, cool-white, recommended color) (2), each
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
$75.00
20.00
40.00
3.00
3.00
32.50
12.00
37.00
12.00
12.00
4.00
1.00
15.00
30.00
1.75
12.00
6.50
SEEBURG LS1 “Spectra” of 1967 – 1968 & LS2 “Gem” of 1968 – 1969
80 records (160 Selections)
A-1 PART #
80-065
80-066
80-067
80-068
80-069
80-070
34-001
34-002
73-055
83-006
84-001
84-002
84-003
84-004
Service, Installation & Operation manual, LS1, 154 pages, order R-320
Parts manual, Seeburg LS1, 42 pages, order R-331
Seeburg LS1, purchase R-320 and R-331, save $9.00, order R-320A
Service manual, Seeburg LS2, (Supplements the LS1 Service manual and
both are required for complete service to the LS2), 40 pages, order R-334
Installation, Operation & Parts catalog, Seeburg LS2, 102 pages, order R-332
Seeburg LS2, purchase R-320, R-334 & R-332, save $22.00, order R-334A
Front door glass, original pattern, includes white translucent plastic panels,
for LS1 only, pair, (add $25.00 for packing & shipping an oversize box)
Front door glass, original pattern, includes white translucent plastic panel,
for LS1 only, (add $25.00 for packing & shipping an oversize box), each
Seeburg models: LPC1 through LS2, labels for program title-holders,
(Letters and numbers, A1 thru V8), original font, peal and stick, 10 piece set
Brushes, stylus-cleaning, double sided
Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
Motor support plug, rubber, for under mechanism motor
Mechanism turntable drive bushings, Seeburg part # 245464, pair
Mechanism frame rubber bumper, Seeburg part # 245291, pair
- 73 -
$40.00
29.00
60.00
27.00
35.00
80.00
130.00
75.00
8.00
12.00
25.00
3.00
10.00
5.00
SEEBURG LS1 “Spectra” of 1967 – 1968 and
LS2 “Gem” of 1968 – 1969 (Continued)
A-1 PART #
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-038 Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
74-008 Styli, wedge shaped, for all original Pickering/Seeburg cartridges including
#345-03D, (.7 mil diamond tip for all stereo and mono. records),
(This item is not discountable, at this price), per pair
83-008 Springs for tone arm, long “U” on one end, hand made in the U.S.A., pair
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-015 Spring, for original SP/ST – momentary slide, part of the service switch,
can be replaced without removing switch or re-soldering wires, (AY thru LS2)
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
84-035 Grommets, support the latch bar solenoid, (replace if rubber is hard), 4 pc. set
34-003 Letter and number strips, indicate location of 45s in the record magazine,
peal & stick, 2 piece set
76-014 Key for cabinet sides, (not cash door), F205
67-012 Cash door, superior grade birch covered plywood, with backup plates,
(for use with metal frame around opening, Models C through LS3)
76-050 Lock, 1 1/8” quality lock, & 2 keys for Reproduction - wooden cash door
76-051 Lock, 1 1/8” quality lock, hardware, & 2 keys for Original metal cash door
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
92-058 Capacitor kits for Amplifiers used in Seeburg Models: LPC1 through
USC2, Specify: Amplifier # TSA1 through TSA10, each kit includes:
Schematics and replacement values reference sheet, each kit
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
91-011 Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
92-064 Capacitor kit for SCC7 used in Seeburg LS1, includes: schematics &
replacement values reference sheet
92-065 Capacitor kit for SCC8 used in Seeburg LS2, includes: schematics &
replacement values reference sheet
92-022 Silicon control switch, replaces Seeburg part #s: 309377 & 309472, found
in SCC1 thru SCC9, (Models U-100 thru SB100), not digital models, each
72-002 Bulb, miniature #19 (digital selection display, 28 required), and
(credit window lamps) (1, 2 or all 3 can be used), each
70-020 Fluorescent lamp, UPPER, for Model LS1, (not for LS2) 18 watt 30” T8,
Note: Use FS-U Starter for this lamp, cool-white, (1)
70-022 Fluorescent lamp, UPPER, for Model LS2, (not for LS1) 18 Watt 24" T8,
Note: Use FS-U Starter for this lamp, cool-white, (1)
- 74 -
$25.00
75.00
1.00
30.00
7.00
14.00
6.00
6.00
35.00
8.00
3.00
5.00
7.00
18.00
12.00
12.00
4.00
75.00
20.00
40.00
3.00
3.00
25.00
25.00
12.00
4.00
15.00
9.00
SEEBURG LS1 “Spectra” of 1967 – 1968 and
LS2 “Gem” of 1968 – 1969 (Continued)
A-1 PART #
70-012 LS1 & LS2, Fluorescent lamp, LOWER, 30 watt 36” T8, cool-white, (1)
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
$15.00
15.00
30.00
1.75
1.75
12.00
6.50
SEEBURG LS3 “Apollo” of 1969 – 1970 through
STD4 “Mardi-Gras” of 1977 – 1978 (160 Selection Models)
A-1 PART #
84-001
84-002
84-003
84-004
84-015
Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
Motor support plug, rubber, for under mechanism motor
Mechanism turntable drive bushings, Seeburg part # 245464, pair
Mechanism frame rubber bumper, Seeburg part # 245291, pair
Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
Styli, wedge shaped, for all original Pickering/Seeburg cartridges including
#345-03D, (.7 mil diamond tip for all stereo and mono. records),
(This item is not discountable, at this price), per pair
Springs for tone arm, long “U” on one end, hand made in the U.S.A., pair
Spring for mechanism reversing switch, (Models B thru STD4), handmade
Spring, for original SP/ST – momentary slide, part of the service switch,
can be replaced without removing switch or re-soldering wires, (AY thru LS2)
Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
Spring for mechanism reversing switch, (Models B thru STD4), handmade
Contact lever assembly, Seeburg part # 10-252635, these make contact with,
and slide on, the Tormat memory unit, for USC1 thru STD4 (2 required), each
Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
$25.00
3.00
10.00
5.00
Carriage roller for mechanism, Seeburg part # 245082, each
Digital receiver & decoder, (DRD1), Grey box, rebuilt, (with exchange)
Digital receiver & decoder, (DRD1), Grey box, rebuilt, (without exchange)
Toggle switch, (Main on-off switch), excellent replacement, for all models
Digital transmitter & pricing unit, (DTP1), Black box, rebuilt, (with exchange)
Digital transmitter & pricing unit, (DTP1), Black box, rebuilt, (without exchange)
Knob, for volume control, round plastic, (amplifier must be removed to attach), has
two 5/64” Allen wrench screws, Seeburg AY100 thru LS3, (SHFA3 Thru TSA9)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
8.00
85.00
105.00
6.50
75.00
95.00
84-025
84-038
74-008
83-008
83-011
83-015
83-017
83-011
83-014
92-015
83-009
78-032
78-034
78-015
78-033
78-035
91-011
- 75 -
25.00
75.00
1.00
30.00
7.00
14.00
6.00
6.00
14.00
5.00
35.00
3.00
3.00
12.00
6.50
SEEBURG USC1 “Bandshell” of 1970 – 1971
80 records (160 Selections)
A-1 PART #
80-071
80-072
80-073
83-006
84-001
84-002
84-003
84-004
84-015
84-025
84-038
74-008
83-008
83-011
83-017
83-014
92-015
Service manual, Seeburg USC1 & USC2, 146 pages, order R-321
Parts manual, Seeburg USC1, 78 pages, order R-65
Seeburg USC1, Purchase R-321 and R-65, save $10.00, order R-321A
Brushes, stylus-cleaning, double sided
Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
Motor support plug, rubber, for under mechanism motor
Mechanism turntable drive bushings, Seeburg part # 245464, pair
Mechanism frame rubber bumper, Seeburg part # 245291, pair
Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
Styli, wedge shaped, for all original Pickering/Seeburg cartridges including
#345-03D, (.7 mil diamond tip for all stereo and mono. records),
(This item is not discountable, at this price), per pair
Springs for tone arm, long “U” on one end, hand made in the U.S.A., pair
Spring for mechanism reversing switch, (Models B thru STD4), handmade
Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
Contact lever assembly, Seeburg part # 10-252635, these make contact with,
and slide on, the Tormat memory unit, for USC1 thru STD4 (2 required), each
Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
89-005 Letter and number strips, indicate location of 45s in the record magazine,
(160 selection Models only: LS3 through SMC3), peal & stick, 2 piece set
76-015 Key for cabinet sides, (not cash door), F291
67-014 Cash door, large, birch covered plywood, with backup plates
76-052 Lock, for Repro. wood cash door, for Models USC1 through SMC3,
7/8” quality lock, hardware, & 2 keys
76-053 Lock, for Original metal cash door, for Models USC1 through SMC3,
7/8” quality lock, hardware, & 2 keys
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
92-058 Capacitor kits for Amplifiers used in Seeburg Models: LPC1 through
USC2, Specify: Amplifier # TSA1 through TSA10, each kit includes:
Schematics and replacement values reference sheet, each kit
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
91-018 Knob, Large, round, plastic, press-on, for volume control, (for original
potentiometer), in Seeburg Models: USC1 thru SMC3, (For amplifiers:
(TSA10 through SHP3), A-1 Part # 91-015 can also be used
72-002 Bulb, miniature #19 (digital selection display) (20 required), each
72-017 Bulb, miniature #1819 (instruction and credit window lamps) (6 total), ea.
- 76 -
$40.00
32.00
62.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
1.00
30.00
7.00
14.00
6.00
5.00
35.00
8.00
5.00
7.00
20.00
12.00
12.00
4.00
75.00
20.00
40.00
$3.00
3.00
4.00
2.00
SEEBURG USC1 “Bandshell” of 1970 – 1971 (Continued)
A-1 PART #
70-012 Fluorescent lamp 30 watt 36” T8, cool-white, CW or Day. can be used (3), each
70-013 Fluorescent lamp 30 watt 36” T8, daylight, CW or Day. can be used (3), each
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
$15.00
15.00
30.00
1.75
12.00
6.50
SEEBURG USC2 “Bandshell Firestar” of 1971 – 1972
80 Records (160 Selections)
A-1 PART #
80-071 Service manual, Seeburg USC1 & USC2, 146 pages, order R-321
80-074 Service Supplement, Installation & Operation manual, Seeburg USC2,
(Supplements the USC1 Service manual R-321 and both are required
for complete service to the USC2), 110 pages, order R-336
80-075 Parts catalog, Seeburg USC2, 78 pages, order R-338
80-076 Seeburg USC2, purchase R-321, R-336 & R-338, save $27.00, order R-336A
80-084 USC2 Restoration Video, (VHS tape), running time 1 hr. 43 minutes, (limited qty.)
36-001 Record now playing indicator glass, left of selection keypad
36-002 Credits & Instruction glass, right of selection keypad
36-010 Record now playing indicator glass, left of selection keypad and Credit &
Instruction glass, right of selection keypad, (Purchase both and save $10.)
36-003 Printed plastic strips, (14 ½” W X 1 5/16” H), used in back of
record playing glass and credit & instruction glass, 4 piece set
36-004 Lid glass, (program title glass), has black printed border only,
(add $50 per order for packaging & shipping)
36-005 Front glass, original printed pattern, (add $50 for packaging & shipping)
36-006 Front printed plastic panel, (no additional pack. & ship. if sent with glass)
36-007 Side glass, left or right, each
36-008 Printed plastic panel, for left side glass, each
36-009 Printed plastic panel, for right side glass, each
83-006 Brushes, stylus-cleaning, double sided
84-001 Motor coupler, connects mech. motor to gear, (replace if rubber is hard)
84-002 Motor support plug, rubber, for under mechanism motor
84-003 Mechanism turntable drive bushings, Seeburg part # 245464, pair
84-004 Mechanism frame rubber bumper, Seeburg part # 245291, pair
84-015 Motor mounts, (round, metal & rubber rings); hold mechanism motor in place,
for all models using mechanism motors made in the U.S.A., 2 required, each
84-025 Seeburg B & up, Rubber parts for Mechanism: 84-001, 84-002, 84-003, 84-004,
& (2) 84-015, (replace if rubber is hard, eliminates “Howl” in the audio), 8 pc. set
84-038 Grommet, supports metal mechanism cover, on Side of LPC1 & LPC480
and on Front of covers for models PFEAIU and newer, (eliminates shorting)
74-008 Styli, wedge shaped, for all original Pickering/Seeburg cartridges including
#345-03D, (.7 mil diamond tip for all stereo and mono. records),
(This item is not discountable, at this price), per pair
83-008 Springs for tone arm, long “U” on one end, hand made in the U.S.A., pair
83-011 Spring for mechanism reversing switch, (Models B thru STD4), handmade
83-017 Switch, SP/ST – momentary slide, part of the service switch, (AY thru SMC3)
83-014 Contact lever assembly, Seeburg part # 10-252635, these make contact with,
and slide on, the Tormat memory unit, for USC1 thru STD4 (2 required), each
92-015 Capacitor, (run condenser), for mechanism motor, original style/metal can,
for M100A through STD4, not SX100, for all motors that were manufactured
in the USA, not for Nidec motors, (This item out of stock at this time)
- 77 -
$40.00
37.00
32.00
82.00
19.95
55.00
55.00
100.00
30.00
75.00
120.00
75.00
40.00
50.00
50.00
12.00
25.00
3.00
10.00
5.00
25.00
75.00
1.00
30.00
7.00
14.00
6.00
5.00
35.00
SEEBURG USC2 “Bandshell Firestar” of 1971 – 1972 (Continued)
A-1 PART #
83-009 Carriage roller for mechanism, Seeburg part # 245082, each
89-005 Letter and number strips, indicate location of 45s in the record magazine,
(160 selection Models only: LS3 through SMC3), peal & stick, 2 piece set
76-015 Key for cabinet sides, (not cash door), F291
67-014 Cash door, large, birch covered plywood, with backup plates
76-052 Lock, for Repro. wood cash door, for Models USC1 through SMC3,
7/8” quality lock, hardware, & 2 keys
76-053 Lock, for Original metal cash door, for Models USC1 through SMC3,
7/8” quality lock, hardware, & 2 keys
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
92-058 Capacitor kits for Amplifiers used in Seeburg Models: LPC1 through
USC2, Specify: Amplifier # TSA1 through TSA10, each kit includes:
Schematics and replacement values reference sheet, each kit
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
91-002 Volume control pot. (for stereo amplifiers): SHFA1, SHFA2 and TSA1
through TSA10, Also: Stereo Amps. in Rock-Ola Models
1460 through 437, (This item is out of stock at this time)
91-015 Knob, press-on, for volume control, (for original potentiometer), in
Seeburg Models: AY100 thru SMC3, (For amplifiers: SHFA3 thru SHP3)
91-018 Knob, Large, round, plastic, press-on, for volume control, (for original
potentiometer), in Seeburg Models: USC1 thru SMC3, (For amplifiers:
(TSA10 through SHP3), A-1 Part # 91-015 can also be used
72-002 Bulb, miniature #19, (digital selection display) (20 required), each
72-017 Bulb, miniature #1819, (instruction and credit window lamps) (6 total), ea.
70-012 Fluorescent lamp 30 watt 36” T8, cool-white, CW or Day. can be used (3), each
70-013 Fluorescent lamp 30 watt 36” T8, daylight, CW or Day. can be used (3), each
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
$8.00
5.00
7.00
20.00
12.00
12.00
4.00
75.00
20.00
40.00
3.00
3.00
4.00
2.00
15.00
15.00
30.00
1.75
12.00
6.50
SEEBURG HARDWARE: NUTS, BOLTS, SCREWS, ETC.
FOR SEEBURG JUKEBOXES
A-1 PART #
68-091 Seeburg B through VL200, screws for both sides of the Hinge for the glass
dome-frame, flat head Phillips, plated, 18 required, (20 pieces in the pack)
68-007 Seeburg A, B, BL and C, Speed washers, round, hold letter/number strips
& title headings to program title holders. Also hold: 2 pc. Inst. glass;
SELECT glass & COINS glass, 55 pieces
68-075 Seeburg G, W, R, J & JL, Speed washers, round, hold title headings
to program holders, (same part as 68-007 but 12 pieces), 12 piece set
68-016 Carriage bolt (1) & wing nut (1) for lower back door cover, for
Seeburg B thru VL, (3 pairs required), each pair
68-023 Seeburg B through VL and 201, shaft and 2 E washers,
prevents mechanism chassis from sliding, (2 required), each
68-030 Seeburg C, G & W, Screws (6) and washers (6), stainless steel,
hold mirror frames in place at both ends of mechanism, (screw heads
were originally painted red), 12 piece set
68-080 Seeburg C, G & W, Screws, Stainless, (Oval head, slotted, as original) (6)
and finishing washers (6), hold mechanism end caps in place, 12 piece set
- 78 -
$3.00
7.00
1.55
1.50
6.00
4.00
6.00
SEEBURG HARDWARE: NUTS, BOLTS, SCREWS, ETC.
FOR SEEBURG JUKEBOXES (Continued)
A-1 PART #
68-085 Seeburg R, J & JL, Screws, Stainless, (Oval head, Phillips, as original) (4)
and finishing washers (4), hold mechanism end caps in place, 8 piece set
68-046 Seeburg KS/KD200 through all newer, (not L100), chassis lock pin,
prevents mechanism chassis from sliding, (2 required), each
68-045 Seeburg B, BL, C, G & W, screws, mech. cover, top & side, stainless, per pair
68-050 Screw, Slotted head, for Top of Mechanism cover, R thru 222, Stainless steel
68-017 Seeburg B, BL & C, Thumb screw, holds electrical selector in place, (4), each
68-035 Seeburg B thru 201, (not for V200 or VL200), Screws, stainless steel,
for plastic stripper plate, Slotted head, set of 6
68-037 Seeburg B thru 201, (not for V200 or VL200), Screws, stainless steel,
for plastic stripper plate, Phillips head, set of 6
68-019 Screw, stainless steel, Slotted head, holds original Seeburg redhead
cartridge in place, (1 required) & for cartridge socket (1 required), each
68-025 Screw, stainless steel, Phillips head, holds original Seeburg redhead
cartridge in place, (1 required) & for cartridge socket (1 required), each
68-060 Screw, stainless steel, Phillips head, holds Pickering 345-03D cartridge,
in place, (For Seeburg, 345-03D cartridge only and only 1 is required)
68-020 Screw, stainless steel, Phillips head, holds Seeburg Stereo cartridge (1)
& for cartridge socket (1), for Seeburg models: 220 thru PFEAIU only, each
68-040 Seeburg B thru JL, Screws w/lock washers, hold metal frame for record now
playing indicator to record magazine frame, Slotted head, set of 4
68-042 Seeburg B thru JL, Screws w/lock washers, hold metal frame for record now
playing indicator to record magazine frame, Phillips head, set of 4
68-022 Seeburg G and W, Screw, Phillips, near cabinet dome locks, (2), each
68-051 Shoulder screw, Stainless steel, (Phillips head, as original, holds left side
of Mechanism cover at correct height), for Seeburg Models: R, J, JL through
222 including V200 & VL200, (original Seeburg # 246356)
68-024 Seeburg Q & Up, Screw for top of metal mechanism cover
68-026 Seeburg A thru VL200, Machine screws, Phillips head, hold Amplifier &
Receiver in place on lower back door, (4) 1” & (4) ½”, 65¢ ea. or 8 piece set
$5.00
4.50
1.50
1.00
2.50
1.50
1.50
1.50
1.50
1.50
1.50
2.00
2.00
1.00
8.00
2.00
5.00
SEEBURG KEYS (For Original Locks), for cabinet sides and
Models with back doors, (not for cash door locks)
FOR MODEL
KEY #
PRICE
L7380
L7325
G219
G245
F221
F279
F314
F313
F264
F278
F330
$3.00
100.00
10.00
10.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
A-1 PART #
76-001 Volume control key: for original potentiometers,
(All Seeburg Amps. thru SHFA2 & all Wurlitzer’s)
76-090 Volume control keys, discount for quantity, 50 pieces $2.00 each
76-002 Key, Seeburg 146, 147, 148: Lid
76-003 Key, Seeburg 146, 147, 148: Door
76-004 Key, Seeburg M100A, M100B, M100BL, (not for cash door locks)
76-005 Key, Seeburg M100C, (not for cash door locks)
76-006 Key, Seeburg HF100G, W100, (not for cash door locks)
76-007 Key, Seeburg HF100R, 100J, 100JL, (not for cash door locks)
76-008 Key, Seeburg V200, VL200, (not for cash door locks)
76-009 Key, Seeburg KS/KD200, L100, 101, 161, 201, (not for cash door locks)
76-010 Key, Seeburg 220, 222, AQ100/160, AY100/160, DS100/160
76-011 Key, Seeburg LPC1, LPC480, (not for cash door locks)
76-012 Key, Seeburg U100 (Mustang), (not for cash door locks)
76-013 Key, Seeburg PFEA1U (Electra), APFEA1 (Fleetwood) and
SS160 (Showcase), (not for cash door locks)
- 79 -
F336
7.00
SEEBURG KEYS (For Original Locks), for cabinet sides and
Models with back doors, (not for cash door locks) (Continued)
FOR MODEL
KEY #
PRICE
A-1 PART #
76-014 Key, Seeburg S100 (Phonojet), LS1 (Spectra), LS2 (Gem),
LS3 and SE100, (not for cash door locks)
F205
76-015 Key, Seeburg USC1 (Bandshell) and USC2 (Firestar)
F291
76-016 Key, Seeburg SX-100, SPS160, SPS2, FC1, SL100, SQS160,
STD160, SB100, STD2, STD3, 100-77D, FC2, 100-78D and
STD4, Key for Cabinet and back door, (not for cash door locks)
F293
76-017 Key, Seeburg SMC1 (Disco 160) and SMC2 (Phoenix)
S102
76-018 Key, Seeburg VMC1 (Video Music) and SMC3 (Prelude)
F333
76-019 Keys, Seeburg master set, 17 cut keys & 1 volume control key, (Save $23.00)
76-085 Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
$7.00
7.00
7.00
8.00
7.00
105.00
4.00
We stock original and replacement Locks and keys for Seeburg wallboxes,
(For Seeburg wallbox lock information, please see page 81).
SEEBURG MECHANISM MOTORS &
SELECTOR COIL ARMATURE ASSEMBLIES,
(a/k/a Pin Banks or Pin Cages)
A-1 PART #
84-016 Motor for mechanism, Bodine, 4 wire leads, used, tested, guaranteed
84-020 Selector Coil & Armature Assembly, (a/k/a: Pin Bank), (Completely
dissembled & rebuilt, 100% Guaranteed, “A quality restoration”). Immediate
delivery is available. An exchange is required: Customer must send a
Pin Bank that is in good, original, condition, (In other words, one that can be
rebuilt and is not damaged), Specify: M100B/BL, M100C, HF100G, W100,
HF100R, 100J or 100JL, each
$125.00
195.00
SEEBURG SPRAY PAINTS
“Seeburg paints” are custom formulated using high quality acrylic enamel.
(All spray paint cans contain between 10.5 ounces and 12 ounces).
Please note: Spray Paint can be shipped within the USA via UPS Ground only.
For Security & safety reasons, we will not ship Spray Paint via air transportation.
SPRAY PAINTS FOR SEEBURG JUKEBOXES
A-1 PART #
88-006 Spray paint, “Seeburg Yellow”, for Model M100C, for mechanism frame
and most of the other mechanism parts, acrylic enamel, 10.5 oz. can
88-007 Spray paint, “Seeburg Aqua/Blue”, for Model M100C, for mechanism cover
and base of mechanism, acrylic enamel, 10.5 oz. can
88-008 Spray paint, Red, for Model G magazine and mechanism frame, also for
Model W entire mech. except for mech. cover, acrylic enamel, 10.5 oz. can
88-009 Spray paint, Dark Blue, for HF100G & W100, metal grill on front, 12 oz. can
88-010 Spray paint, Light Blue, Model G, for mechanism cover & mechanism
end caps, and for HF100R mech. cover, acrylic enamel, 10.5 oz. can
Parts for Seeburg Speaker are listed on the next page
- 80 -
$25.00
25.00
25.00
14.00
25.00
SEEBURG SPEAKER PARTS
A-1 PART #
82-004 Grill, musical note-shaped, mirror polished stainless steel for front of
original or reproduction, large teardrop-mirrored speaker, (18 1/8” H X 12” W)
82-002 Mirrors for large teardrop-mirrored speaker, blue glass, (161 1” squares)
82-003 Seeburg Logo for Small Teardrop Spkr., polished Zinc, w/2 speed washers
82-006 Line matching transformer for Speakers w/constant voltage, 10 watt, 70.7 volt
77-055 Mirror kit for KLEERTONE: Musical Note Front & Model 125 speakers,
Blue mirrors, (92 pieces, 2” X ½”), for speaker cabinet
$60.00
85.00
50.00
9.00
65.00
SEEBURG WALL-O-MATIC and CONSOLETTE WALLBOXES
A-1 PART #
80-121
37-015
80-077
80-078
80-115
37-020
37-001
37-018
37-016
37-002
37-017
37-021
37-022
37-003
37-004
37-005
37-006
37-150
37-007
37-013
37-012
76-060
76-085
37-008
37-010
37-011
37-009
72-006
72-006
72-008
72-002
Manual, for pre-war Seeburg wallboxes, 148 pages, order R-301
Front glass, printed, (shows pricing), for 1940 Seeburg Bar-0-Matic
Manual, 3W-1 & 3W-1D wallboxes, 24 pages, order R-328
Manual, wallboxes: 200 and 160 play & type 3W100, 56 pages, order R-168
Manual, wallboxes, stereo Consolette models SCI and SCII, 48 pgs, R-317
Program window, original, curved GLASS, with original logo for 3W-1 only
Program window, curved plastic, printed as original, for 3W-1 only
Program window, curved plastic, printed as original, for 160 select models
Program window, curved plastic, printed as original, for 3WA, 200 models
Instruction plate, (metal), original shape & printed as original, for 3W-1 only
Letter and number strips for title holder pages, for 3W-1 only,
(These indicate A1 thru K10), peel and stick, 10 piece set
Foil, peel and stick cover for Instruction plate, printed as original, 3W-1 only
Foil, peel & stick cover for Instruction plate, printed as original, 160 & 200 only
Select lens for instruction plate, green plastic, original shape, for 3W-1 only
Coin entry glass, COINS, 6 PLAYS – QUARTER, etc., w/red felt backer, for 3W-1
Coin entry glass, 10¢/25¢, 3 PLAYS QUARTER, etc., w/red felt backer, for 3W-1
Coin entry glass, 25¢, 1 PLAY – QUARTER, with red felt backer, for 3W-1 only
Red felt backer only, pre-cut, for A-1 # 37-004, 37-005 & 37-006, each
Springs for pages, fits 3W-1 & 3W-100 models, (2 required), per pair
Spring for pages, fits 160 and 200 selection models, (1 required)
Plastic instruction plate, “Turn pages to view entire program”, for
160 and 200 selection wall boxes only
Lock, original lock, one key, barrel nut and roll pin, for 3W-1 wallboxes
Key, for all of our reproduction locks that are keyed alike, key # LS301, ea.
Plug, 3 prongs w/lock arms for connecting wall boxes to selection receivers
Socket, 3 prong w/lock arms, to splice cable at any point using 3 prong plug
Socket, 3 prong panel mount for wired selection receivers,
(this socket receives A-1 Part # 37-008)
Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
Bulb, miniature #51 (above pages & under select window) 3W-1 (3), each
Bulb, miniature #51 (above pages & in selections windows) 160 and
200 Selection wallboxes, (up to 6), each
Bulb, miniature #55 (coin entry and push buttons) 3W-1, 3W100,
160 selection and all 200 selection Seeburg wallboxes (3), each
Bulb, miniature #19, (2 prong), Stereo Consolette wallboxes, these
Illuminate the pricing & select glasses and above the turning pages (5), ea.
We stock original Locks & keys for Seeburg wallboxes. To order a key for
an original Seeburg wallbox lock, please Specify: the “S” Key #, (a 3 digit #)
on the face of the original lock. Keys for wallbox locks are $12.00 each.
- 81 -
$40.00
20.00
20.00
28.00
27.00
45.00
25.00
35.00
35.00
25.00
10.00
9.00
9.00
9.00
9.00
9.00
9.00
0.35
9.00
5.00
15.00
18.00
4.00
15.00
15.00
10.00
10.00
1.00
1.00
1.00
4.00
FOR SEEBURG JUKEBOXES, WE STOCK: SERVICE MANUALS,
TROUBLE SHOOTING GUIDES, MINI BULBS & FLUORESCENT LAMPS,
CARTRIDGES, STYLI, (NEEDLES), KEYS FOR CABINET LOCKS,
CREDIT UNIT ADAPTERS & REPLACEMENT CREDIT UNITS FOR MOST
SEEBURG MODELS. Please Call or Email for details and pricing.
WURLITZER
WURLITZER KEYBOARD BUTTON SETS (Information about)
Exact reproductions, BEAUTIFUL! For Models: 1700, 2000, 2100, 2200, 2300,
and 2310. All Letters & Numbers are heat stamped onto each button,
as original and each clear cap is pre-set during production.
(Each button is meticulously, handmade, in the U.S.A.)
Please note: All exact reproduction “Wurlitzer Keyboard Button Sets” are in
limited supply. Also, Wurlitzer Keyboard button sets are not discountable.
WURLITZER KEYBOARD BUTTON SETS
A-1 PART #
96-060 Wurlitzer Model 1700, Keyboard buttons, 30 piece set, (limited quantity)
96-061 Wurlitzer Model 1700, individual Keyboard buttons,
original Maroon-Red color, (26 per complete set), (limited quantity), each
$130.00
6.00
96-063 Wurlitzer Models 2000 & 2100, Keyboard buttons,
30 piece set, (limited quantity in stock, this item is not discountable)
150.00
96-064 Wurlitzer Models 2200 & 2300, Keyboard buttons,
30 piece set, (limited quantity in stock, this item is not discountable)
150.00
96-066 Wurlitzer Model 2310, Keyboard buttons,
20 piece set, (limited quantity in stock, this item is not discountable)
96-067 Wurlitzer Models 1700, 1800, 1900 & 2104, Large Square keyboard
buttons, (A, B, C and D only), 4 piece set, (limited quantity in stock)
96-003 Wurlitzer Models 3100 and 3200, Keyboard button, original red color,
with metal insert, (This item is unavailable until further notice), each
130.00
75.00
5.00
MISCELLANEOUS WURLITZER PARTS
A-1 PART #
96-032 Model 750 wooden caster blocks, each
96-014 Model 800 front door center amber plastic, resin molded,
exact reproduction, (Limited quantity in stock)
96-033 Model 850 wooded caster blocks, each
$12.00
185.00
10.00
65-003 Foil, embossed, gold, ½” pillowed squares,
for interior of Seeburg M100C, Wurlitzer 1080 & 1100,
32” X 16” sheet, Original thickness, (2 sheets required), each sheet
40.00
65-020 Special: This is the exact same foil as our # 65-003 but the gauge
or thickness of the sheet is thinner, save 50% off the regular price,
32” X 16” sheet, Thinner gauge, (2 sheets required), each sheet
20.00
72-012 Bulb, miniature #87, 6.8 volt, Wurlitzer 1100 Arch, each
96-045 1100 Lower cabinet plastics, beautiful 4 piece set, (Not discountable)
96-016 1250 Light diffusers for above program holders, white plastic, 3 piece set
- 82 -
2.00
525.00
18.00
MISCELLANEOUS WURLITZER PARTS (Continued)
A-1 PART #
96-019 1250 Program title glass, numbers printed as original, 3 piece set
96-020 1250 Color sheet, front of mech. 22” W x 2 ½” H, green, red, purple & yellow
62-001 Color sheet, Universal, 4 vertical colors, Green, Red, Purple and Yellow,
Sheet size is 23 ¾” X 8 ¾”, (also a perfect replacement for OMT), per pair
92-018 Bridge rectifier, 15 amps. 200 volts, 4 posts, w/mounting hole, a must
replacement part for power supplies in Wurlitzer: 1500, 1550 & 1700 – 2400
91-005 Volume control pot. for Models 1400, 1500, 1600, 1700 & 1800
76-001 Volume control key for original pots, (Seeburg amps. thru SHFA2 & all Wurlitzer’s)
83-048 Brush, (needle cleaning brush), Ami E and newer, Rock-Ola 1438 and newer
and Wurlitzer 1700 thru 3800, (Not One More Time models), one brush
96-034 Model 1800 Floor, (Not discountable), (add $50 for packaging & shipping)
96-035 Model 1800 Speaker baffle board, (add $50 for packaging & shipping)
96-071 1800 thru 3200, Cash bag, Wur # 62670, duck cloth, as original, handmade
96-037 Decal, Centennial, 1856-1956, for Models 1900 & 2000
91-006 Volume control potentiometer for Models 1900 through 2400 (mono.)
72-022 Bulb, #303, 28 volt, for Wurlitzer 2600 – 3300 Junction boxes, each
96-070 Front glass for 2700 and 2710, “Wurlitzer Stereo”, New Original stock,
(Limited quantity in stock), each
66-008 Decal, Stereophonic, water transfer, gold, black & red, 6 3/8” x 1 3/4"
92-019 Transistor, PNP germanium, for Seeburg TSA1 thru TSA10 Amplifiers,
Seeburg Auto Speed Units and Wurlitzer Amplifiers: 546 thru 553, each
92-020 Transistor, NPN silicon, for Seeburg SHP Amplifiers
& Wurlitzer 556 Amplifiers, each
96-005
96-006
96-007
96-008
Drive belt for turntable motor, Models: 1700 through 2500, each
Drive belt for turntable motor, Models: 2600 and 2610 only, each
Drive belt for turntable motor, Models: 2700 and 2800, each
Drive belt for turntable motor, series:
2900 through 3300, one size fits both pulleys, 2 required, each
96-009 Drive belt for turntable motor, series: 3400 through 3800,
7500 & 1050, one size fits both pulleys, 2 required, each
96-050 Model 1050 Pilaster plastic, (unavailable until further notice), left side
96-051 Model 1050 Pilaster plastic, (unavailable until further notice), right side
96-052 Model 1050 Pilaster plastics, (unavailable until further notice), per pair
72-035 Bulb, miniature, “Gate lamp”, for all computerized Wurlitzer jukeboxes
including all One More Time, (OMT), models that play 45s and CDs
71-005 Ballast 4 to 8 watt T5, for 1 lamp, new square style, clamped core, each
71-003 Ballast 13 watt T8, for 1 lamp, new square style, clamped core, each
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-021 Ballast, Double 20 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
- 83 -
$36.00
15.00
28.00
8.00
40.00
3.00
6.00
125.00
180.00
14.00
10.00
40.00
2.00
50.00
6.00
20.00
5.00
5.00
5.00
5.00
5.00
5.00
120.00
120.00
210.00
4.00
18.00
15.00
15.00
45.00
18.00
22.50
45.00
30.00
1.75
1.75
MISCELLANEOUS WURLITZER PARTS (Continued)
A-1 PART #
71-015 Starter socket, exact match for most jukeboxes, (brown only)
$4.50
71-013
71-014
71-016
71-040
4.50
4.50
12.00
Fluorescent lamp socket, T8 & T12, exact match for most jukeboxes, (black)
Fluorescent lamp socket, T8 & T12, exact match for most jukeboxes, (white)
Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot length,
with molded plug, for Wurlitzer models through 3200
68-097 Caster, 2” hard rubber, (with a caster socket & 4 stainless mounting screws), each
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
90-
7.50
8.25
6.50
Tubes, Electron tubes: (See pages 94, 95 and 96 for a complete list)
GROMMETS AND MOUNTS FOR WURLITZER TURNTABLE MOTORS
Note: Concerning replacement Grommets and Mounts for Turntable motors
in Wurlitzer Models 1700 and newer:
Wurlitzer Models 1700 thru early 2800: Turntable motors in these models
take 2 mounts above the motor and 2 grommets below the motor.
Wurlitzer Models Late 2800 thru 3300: Turntable motors in these models
take 3 mounts, (2 above the motor and one below the motor).
Wurlitzer Models 3400 thru 3800, 1050 & 7500: Turntable motors in these
models take 4 mounts and no grommets.
A-1 PART #
96-057 Wurlitzer turntable motor mounts, #60882, each
$5.00
96-058 Wurlitzer turntable motor grommets #49884, each
3.00
WURLITZER KEYS (For Original Locks), for cabinet sides and
Models with back doors, (not for cash door locks)
FOR MODEL
KEY #
PRICE
A-1 PART #
76-001 Volume control key: for original potentiometers,
(All Seeburg Amps. thru SHFA2 & all Wurlitzer’s)
$3.00
76-090 Volume control keys, discount for quantity, 50 pieces $2.00 each
76-025 Key, TF25, for Wurlitzer 41, 71, 81
100.00
TF25
76-026 Keys, for Wurlitzer 700, 800 & 780, (both required), TF25 & LF50, for both
76-027
76-028
76-029
76-030
76-031
76-033
76-032
76-034
76-035
76-036
76-037
76-038
76-039
76-040
Key, LF50, for Wurlitzer 750, 850 and 950
Key, RW75, for Wurlitzer 1015, 1080, 1100 and 1250
Key, RW44, for Wurlitzer 1400 and 1450
Key, RW47, for Wurlitzer 1500 and 1550
Key, RW49, for Wurlitzer 1500A, 1550A, 1600 and 1650
Key, RW80, for Wurlitzer 1700 and 1700HF
Key, RW85, for Wurlitzer 1600A and 1650A
Key, RW90, for Wurlitzer all Models from 1800 through 2410
Key, RW95, for Wurlitzer all Models from 2500 through 3010
Key, RW100, for Wurlitzer 3100, 3200 and 3300
Key, RW105, for Wurlitzer 3400, 3410 and 3460 only
Key, RW110, Wurlitzer 3500, 3600, 3700, 7500, all 3800 & 1050
Key, Wurlitzer One More Time, 45s & CDs, (Reproduction 1015)
Key, Wurlitzer New York, NY & other CD models, (not OMT)
- 84 -
LF50
RW 75
RW 44
RW 47
RW 49
RW 80
RW 85
RW 90
RW 95
RW100
RW105
RW110
WUA 1
WUA 2
7.00
12.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
9.00
9.00
WURLITZER MOUNTING BOARDS FOR MECHANISMS
A-1 PART #
Please note: Wurlitzer Mounting Boards for Mechanisms are not discountable
96-021
96-027
96-028
96-026
96-029
Mech. board 600 Rotary w/walnut veneer (add $50 for pack. & ship.)
Mech. board Victory 600 Rotary w/walnut veneer (add $50 for pack. & ship.)
Mech. board Victory 600 Keyboard w/walnut veneer (+ $50 for pack. & ship.)
Mech. board 800 with walnut veneer (add $50 for packaging & shipping)
Mech. board 850 with walnut veneer (add $50 for packaging & shipping)
$130.00
130.00
130.00
130.00
130.00
FOR WURLITZER JUKEBOXES, WE STOCK: SERVICE MANUALS,
TROUBLE SHOOTING GUIDES, PARTS LISTS, MINI BULBS,
CARTRIDGES, STYLI – (NEEDLES), FLUORESCENT LAMPS, AND
KEYS, (FOR ORIGINAL CABINET LOCKS), FOR MOST MODELS
Please Call or Email for details and pricing.
BOOKS, JUKEBOX HISTORY
AND BOOKS ABOUT JUKEBOXES
A-1 PART #
80-079 History book, AMi Jukeboxes, Includes: The pre Jukebox era; Early AMi
Jukebox, with text, photos and other data on Ami and Rowe Jukeboxes
from 1938 through 1989, 176 pages
$39.50
80-081 History book, Seeburg Jukeboxes, Includes: 62 years of fun 1927 – 1989;
The pre Seeburg Jukebox era; Jukeboxes by Seeburg and others 1927-1933;
Special features in Jukeboxes and wall boxes and Ready reference data for
Seeburg Jukebox Models A of 1948 through SCDI of 1986-87, 142 pages
39.50
80-082 History book, Wurlitzer Jukeboxes, Includes: Chronology of Wurlitzer Jukeboxes
1934 through 1974; Early history of Wurlitzer; Photos and data on Wurlitzer
Jukeboxes, and remote equipment; Jukeboxes by Wurlitzer Of West Germany
and Deutsche Wurlitzer including the “One More Time”, 224 pages
40.00
80-083 History Book, Obscure Jukeboxes, Volume 1, also by Frank Adams, Includes:
Edison Phonographs, Regina Music Boxes and rare Jukeboxes manufactured by
Mills, Aireon, United, Ristaucrat and a host of other American manufacturers from
1889 through 1993. Mostly black & white pictures, some in full color, 182 pages
24.50
80-085 Restoring the Seeburg “C”, detailed instructions with pictures, 64 pages
24.00
80-086 Mechanical restoration guide for 50s Seeburg Jukeboxes, 36 pages
15.00
BULBS, INCANDESCENT, (LIGHT BULBS)
A-1 PART #
72-025 Light bulbs, 7½ watts, standard base, long life,
Specify: clear, orange or white, each
72-026 Light bulb, 11 watts, frosted, standard base, long life, each
72-027 Light bulbs, 11 watts, standard base, long life, Specify: translucent red,
translucent amber, translucent blue, translucent yellow, translucent green, each
72-028 Light bulb, 15 watts, standard base, long life, Specify: clear or frosted, each
Miniature Bulbs are listed on the next page
- 85 -
$2.50
2.50
3.00
2.50
BULBS, MINIATURE
A-1 PART #
72-001 Bulb, miniature #12, (2 prong), 6.3 volt, Late 50’s/Early 60’s Seeburg’s, ea.
72-002 Bulb, miniature #19, (2 prong), 14.4 volt, for 12 volt applications, 1971 & up
Seeburg’s, (digital selection indicators & Consolette wallboxes), each
72-021 Bulb, miniature #37, 14 volt, (wedge base), Rock-Ola 490-1, each
72-003 Bulb, miniature #44, 6.3 volt, for Rock-Ola, Seeburg & Wurlitzer, each
72-004 Bulb, miniature #47, 6.3 volt, for Rock-Ola, Seeburg & Wurlitzer, each
72-006 Bulb, miniature #51, 7.5 volt, Seeburg 146/147/148 selection dial &
Seeburg wallboxes, & Wurlitzer 2000 & 2100, (n.o.s. Westinghouse), each
72-007 Bulb, miniature #53, 14.4 volt, Seeburg & Rock-Ola, (n.o.s., Westinghouse), ea.
72-008 Bulb, miniature #55, 7 volt, each
72-010 Bulb, miniature #63, 7 volt, 50s Seeburg’s, each
72-009 Bulb, miniature #73, 14.4 volt, (SMC3 Decorative lamps), each
72-019 Bulb, miniature #74, 14 volt, some Rock-Ola Models, each
72-011 Bulb, miniature #81, 6.5 volt, Rock-Ola 1478 thru 1485, Seeburg 146 – 148
and 50s Seeburg’s, (10 or more #81 Bulbs for only $1.25 each), or each
72-012 Bulb, miniature #87, 6.8 volt, Wurlitzer 1100 Arch, each
72-020 Bulb, #93, 12.8 volt, some Seeburg LPC480 models only, these illuminate
album facsimile pictures located above curved program glass, (16), each
72-022 Bulb, #303, 28 volt, for Wurlitzer 2600 – 3300 Junction boxes, each
72-030 Bulb, #309, 28 volt, for Rock-Ola 1493 & 440 thru 470, power distribution, ea.
72-014 Bulb, miniature #313, 28 volt, (Use bulb # 1819, A-1 Part # 72-017,
for Rock-Ola 1422, 1426 and 1428 Thank You lamp), each
72-015 Bulb, miniature #455, 6.5 volt Flasher,
(new original stock, Westinghouse, best quality), each
72-016 Bulb, miniature #656, 28 volt, (for newer Seeburg Models starting with the
1972 SPS160 Olympian), (Credit, Coins, etc.), each
72-017 Bulb, miniature #1819, 28 volt, Seeburg’s: LS3; USC1; USC2, each
72-005 Bulb, miniature #1847, 6.3 volt, (longer lasting, replaces #47 bulb), each
72-018 Bulb, miniature #2182D, 14 volt, (2 wire), Seeburg: STD2, 3 & 4, ea.
72-035 Bulb, miniature, “Gate lamp”, for all computerized Wurlitzer jukeboxes
including all One More Time, (OMT), models that play 45s and CDs
$4.00
4.00
1.00
1.00
1.00
1.00
1.00
1.00
1.50
1.00
1.00
2.00
2.00
2.50
2.00
3.50
2.00
2.00
1.00
2.00
1.50
1.00
4.00
CARTRIDGES & NEEDLES
Please note: All Cartridges listed in this catalog, are the Very best
quality available. We do not sell inferior products.
A-1 PART #
75-003 Cartridge with needle, Pickering NP/AC, magnetic, stereo,
excellent replacement for AMi: I, J (Stereo), K, Lyric, Continental I & II, L,
M, N, O & MM1 & up, Rock-Ola: 424, 425, 426, 429, 433, 436, 437, 440,
442, 444 & 446 thru 490-2, Wurlitzer: OMT 45 rpm & some German
models. This cartridge can also be used for all 45 rpm Mono. jukeboxes,
not for Seeburg, (requiring a magnetic cartridge), by wiring both channels
& grounds, across, on the back of the cartridge)
75-001 Cartridge with flip over needle, # P-132D ceramic, stereo,
excellent replacement for the original Astatic 51-1 & 51-3 cartridge,
and Rock-Ola: 1468 through 1485, 1493 thru 418, 430, 431, 432, 434, 435,
441, 443, 445, Wurlitzer (Stereo only): 2300 through 3800, 7500 & 1050.
This cartridge can also be used for all 45 rpm Mono. jukeboxes,
not for Seeburg, (requiring a ceramic cartridge), by wiring both channels
& grounds, across, on the back of the cartridge)
- 86 -
$80.00
25.00
Important Note: Replacement Stylus for the P-132D Cartridge:
Use A-1 Part # 74-001, (.7 mil needles), for playing all 45 rpm records,
Use A-1 Part # 74-030, (3 mil needles), for playing original, shellac,
78 rpm records, (Please see these 2 part #’s on Pg. 88 for more information)
NEEDLES, (REPLACEMENT STYLI)
Please note: All Needles, (Replacement Styli), listed in this catalog, are the
Very best quality available. We do not sell inferior products.
A-1 PART #
74-015 Needles, (Styli), for original Seeburg Blackhead cartridge,
(.7 mil sapphire tip, for all 45 rpm stereo and mono. records), per pair
$25.00
74-027 Styli, for original Seeburg Blackhead cartridge, (3 mil sapphire tip
for original, shellac 78 rpm records only. Not for Vinyl 78s), per pair
25.00
74-025 Styli, .7 mil sapphire tip, forked base, (a screw holds each stylus in place),
for Varco cartridges, (early Seeburg conversion cartridges),
(This item is not discountable at this price), per pair
10.00
74-026 Styli, .7 mil diamond tip, forked base, (a screw holds each stylus in place),
for Varco cartridges, (early Seeburg conversion cartridges),
(This item is not discountable at this price), per pair
12.00
74-009 Styli, replaces Astatic SE100-7D, for original Pickering/Seeburg Hi-Fi
magnetic, redhead cartridges used in Models M100B thru 201,
(.7 mil diamond tip for all 45 rpm stereo & mono. records),
(Out of Stock at this time), per pair
65.00
74-010 Styli, T shaped, replace Astatic SE102-7D, for original Pickering/Seeburg
cartridges used in Models 220 thru PFEAIU, (.7 mil diamond tip for all
45 rpm stereo & mono. records), (Unavailable until further notice), per pair
125.00
74-008 Styli, wedge shaped, replaces Astatic SE103-7D, for all Pickering/Seeburg
cartridges used in Models SS160 and newer, Also for Pickering/Seeburg
cartridge # 345-03D used in Models M100B thru 201, (.7 mil diamond tip for
all 45 rpm stereo & mono. records), (This item is not discountable), per pair
30.00
74-038 Styli, # 558-D7, .7 mil diamond, (Stationary), not a flip-needle for Seeburg,
DS conversion, (Thorpe), cartridge Models M100B thru 201, per pair
12.00
74-012 Stylus, Astatic N4-2S, 2 mil sapphire needle, (for reproductionvinyl 78 rpm records only), replaces old style straight needle
10.00
74-021 Stylus, Astatic N29-7S, .7 mil sapphire Z shaped needle for Astatic
# 51 cartridge, (.7 mil diamond tip for all 45 rpm stereo and mono. records)
14.50
74-020 Stylus, # 500-D1, 1 mil diamond needle for AMi Model F only
15.00
74-018 Stylus, # 501-D7, .7 mil diamond tip needle for all 45 rpm records,
replaces Astatic N350-1D, for AMi G & H only
15.00
74-002 Stylus, # 503-D7, .7 mil diamond needle, replaces Astatic N351-1D for AMi i, J,
K, Lyric, Continental I & II and United UPA & UPB, (for all 45 rpm records)
15.00
74-019 Stylus, Astatic SH122-7D, .7 mil diamond needle for AMi L, M, N, & O and
Rock-Ola 424, 425, 426, 429 & 433, (for all 45 rpm records)
18.00
74-014 Stylus, Astatic SH104-7D, .7 mil diamond needle, replacement for
Shure N44C needle, for AMi/Rowe MM1 thru MM6 & up to R-94,
Rock-Ola 436, 437, 440, 442, 444 & 446 thru 490-2
18.00
74-032 Stylus, special production, .7 mil diamond needle for
Wurlitzer One More Time 45 RPM, (for all 45 rpm records)
20.00
- 87 -
NEEDLES (Continued)
Please note: All Needles, (Replacement Styli), listed in this catalog,
are the Very best quality available. We do not sell inferior products.
A-1 PART #
74-004 Styli, # 804-DS77, .7 mil diamond & .7 mil sapphire, “flip-needle”
for Wurlitzer 2300 through 2600 only, (for all 45 rpm records),
See Note below, before ordering this replacement needle
$12.00
74-005 Styli, # 808-DS77, .7 mil diamond & .7 mil sapphire, “flip-needle”
for Wurlitzer 2700 through 3200 only, (for all 45 rpm records),
See Note below, before ordering this replacement needle
12.00
74-003 Stylus, # 159-D7, .7 mil diamond needle, replaces Astatic N43-7D
for Rock-Ola 1484, 1488, 1493, 1495, 1496, 1497, 404 408, 414, 418,
430, 431, 432, 434, 435, 441 and 445, (for all 45 rpm records)
12.00
74-006 Styli, # 813-DS77, .7 mil diamond & .7 mil sapphire, “flip-needle”
for Wurlitzer 3300 only, (for all 45 rpm records),
See Note below, before ordering this replacement needle
12.00
74-013 Styli, Astatic N14-D, .7 mil diamond & .7 mil sapphire, “flip-needle”
for Wurlitzer 3400 & 3500, (for all 45 rpm records),
See Note below, before ordering this replacement needle
10.00
74-007 Styli, Astatic N51-DS77, .7 mil diamond & .7 mil sapphire, “flip-needle” for
Wurlitzer 3600, 3700, 3800, 7500 & 1050, (for all 45 rpm records),
See Note below, before ordering this replacement needle
12.00
Note: For Wurlitzer models 2300 and newer: we recommend that the cartridge
be replaced using our A-1 part # 75-001, (Ceramic cartridge # P-132D),
(The price of the P-132D cartridge is $25.00 and includes a diamond needle).
74-011 Stylus, authentic Pickering, for NP/AC cartridge, .7 mil diamond needle
15.00
74-001 Styli, # 864-DS77, .7 mil diamond & .7 mil sapphire, “flip-needle”
for P-132D ceramic cartridge, (for all 45 rpm records)
12.00
74-030 Styli, # 864-DS73, .7 mil diamond & 3 mil sapphire, “flip-needle”
for P-132D ceramic cartridge, (one side plays 45s, one side plays 78s)
10.00
FLUORESCENT LAMPS, BALLASTS, SOCKETS & STARTERS
Fluorescent lamp diameter guide:
T 5 = 5/8”,
T 8 = 1”,
T12 = 1 ½”
Suggestion: When replacing a fluorescent lamp, always install a new Starter.
If the Ballast is not in excellent condition, or if it is the original ballast,
we strongly suggest replacing it also.
A-1 PART #
70-025
70-001
70-002
70-024
70-023
70-016
70-004
70-005
70-017
70-018
70-022
Fluorescent lamp, 4 Watt 6”
Fluorescent lamp, 6 Watt 9"
Fluorescent lamp, 8 Watt 12"
Fluorescent lamp, 13 Watt 21"
Fluorescent lamp, 14 Watt 15"
Fluorescent lamp, 14 Watt 15"
Fluorescent lamp, 15 Watt 18"
Fluorescent lamp, 15 Watt 18"
Fluorescent lamp, 15 Watt 18"
Fluorescent lamp, 15 Watt 18"
Fluorescent lamp, 18 Watt 24"
T 5 cool-white
T 5 cool-white
T 5 cool-white
T 5 cool-white
T 8 cool-white
T12 cool-white
T 8 cool-white
T 8 Daylight
T12 cool-white
T12 Daylight
T 8 cool-white
- 88 -
$8.00
8.00
8.00
10.00
9.00
10.00
8.00
10.00
10.00
10.00
9.00
FLUORESCENT LAMPS, BALLASTS,
SOCKETS & STARTERS (Continued)
Fluorescent lamp diameter guide:
T 5 = 5/8”,
T 8 = 1”,
T12 = 1 ½”
Suggestion: When replacing a fluorescent lamp, always install a new Starter.
If the Ballast is not in excellent condition, or if it is the original ballast,
we strongly suggest replacing it also.
A-1 PART #
70-021
70-026
70-020
70-006
70-007
70-008
70-009
70-019
70-010
70-011
70-012
70-013
70-014
Fluorescent lamp, 18 Watt 26"
Fluorescent lamp, 18 Watt 28"
Fluorescent lamp, 18 Watt 30"
Fluorescent lamp, 20 Watt 24"
Fluorescent lamp, 20 Watt 24"
Fluorescent lamp, 25 Watt 28"
Fluorescent lamp, 25 Watt 28"
Fluorescent lamp, 25 Watt 30"
Fluorescent lamp, 25 Watt 33"
Fluorescent lamp, 25 Watt 33"
Fluorescent lamp, 30 Watt 36"
Fluorescent lamp, 30 Watt 36"
Fluorescent lamp, 30 Watt 36"
T 8 cool-white
T 8 cool-white
T 8 cool-white
T12 cool-white
T12 Daylight
T12 cool-white
T12 Daylight
T12 cool-white
T12 cool-white
T12 Daylight
T 8 cool-white
T 8 Daylight
T 8 BLB = True “Black Light Bulb”
70-050 Colored sleeve for T12 fluorescent lamp, (cut to your specified length),
Specify: sleeve color: red, blue, green, yellow or pink, per foot
70-055 Colored sleeve for T8 fluorescent lamp,
Specify: sleeve color: red, blue, green, yellow or pink, per foot
71-005 Ballast 4 to 8 watt T5, for 1 lamp, new square style, clamped core, each
71-003 Ballast 13 watt T8, for 1 lamp, new square style, clamped core, each
71-001 Ballast 14 to 20 watt, for 1 lamp, new square style, clamped core, white, each
71-021 Ballast, Double 20 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-006 Ballast, 25 watt, for 1 lamp, new style, (clamped core), made in the U.S.A.
71-035 Ballast, 25 watt, for 1 lamp, original style case & Black color, (Now thermally
protected), made in the U.S.A., includes 2 rubber grommets for mounting
71-024 Ballast, Double 25 watt, (for 2 lamps), original style case & Black color,
thermally protected, made in U.S.A., includes 2 rubber grommets for mounting
71-008 Ballast 30 to 40 watt, for 1 lamp, (Thermally protected),
made in the U.S.A., this item is not discountable at this price
$12.00
12.00
15.00
10.00
10.00
15.00
18.00
18.00
15.00
18.00
15.00
15.00
30.00
1.85
1.85
18.00
15.00
15.00
45.00
18.00
22.50
45.00
30.00
71-028 Starter with condenser, FS-U 4 thru 25 watts, (Replaces: FS-5, 4 to 8 watts,
FS-2, 15 to 20 watts and FS-25, 25 watts), each
71-010 Starter with condenser, FS-4, 30 to 40 watt, made in the U.S.A., each
1.75
1.75
71-015 Starter socket, exact match for most jukeboxes, (brown only)
4.50
71-013 Fluorescent lamp socket, T8 & T12, exact match for most jukeboxes, (black)
71-014 Fluorescent lamp socket, T8 & T12, exact match for most jukeboxes, (white)
4.50
4.50
FOILS, (EMBOSSED FOILS) FOR CABINET INTERIORS
A-1 PART #
65-008 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
$40.00
65-023 Foil, embossed, gold, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-008 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
- 89 -
FOILS, (EMBOSSED FOILS)
FOR CABINET INTERIORS (Continued)
A-1 PART #
65-009 Foil, embossed, gold, ¼” squares, for cabinet interior, 18" X 72" roll,
cloth backed, use spray adhesive for installation, per roll
$40.00
65-024 Foil, embossed, gold, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-009 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-011 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-026 Foil, embossed, silver, ¼” diamonds, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-011 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-012 Foil, embossed, silver, ¼” squares, for cabinet interior, 18” X 72” roll,
cloth backed, use spray adhesive for installation, per roll
40.00
65-027 Foil, embossed, silver, ¼” squares, for cabinet interior, 30" X 52" roll,
(This is the exact same foil as our # 65-012 but this is a larger roll),
cloth backed, use spray adhesive for installation, per roll
50.00
65-003 Foil, embossed, gold, ½” pillowed squares,
for interior of Seeburg M100C, Wurlitzer 1080 & 1100,
32” X 16” sheet, Original thickness, (2 sheets required), each sheet
40.00
65-020 Special: This is the exact same foil as our # 65-003 but the gauge
or thickness of the sheet is thinner, save 50% off the regular price,
32” X 16” sheet, Thinner gauge, (2 sheets required), each sheet
20.00
FUSES
A-1 PART #
97-005 Fuse, AGC, (fast acting), Specify: number of amps located on each fuse, ea.
$2.50
97-002 Fuse, MDL, (slo-blo), Specify: number of amps located on each fuse, each
3.50
97-006 Fuse, Pig-Tail, Specify: AGC or MDL & # of amps located on each fuse, ea.
5.00
97-003 Fuse, GMQ, (red cap), Specify: number of amps located on each fuse, each
5.00
97-004 Fuse holder for GMQ fuses, Specify: ½, 8/10, 1 6/10 or 3 2/10 amps, each
8.00
37-009 Fuse, 3 amp or 3 2/10 amp Fustat, large screw in type, for Seeburg: M100A
thru VL200 Selection Receivers, (these are for the operation of wallboxes)
10.00
Complete Fuse Kits available for any Jukebox Amplifier or other component
part, upon request. For a quote, Please call with model # of Jukebox.
GRILL CLOTH
A-1 PART #
65-002 Grill cloth: All colors except black & Burlap have metallic threads, 30" X 40",
Available colors, Specify: gold metallic, gold leaf, red metallic, red leaf,
silver metallic, silver leaf, black leaf, black with gold threads, black with
silver threads, green, or royal blue, each
65-018 Grill cloth: Burlap, 30” X 40”, Available colors, Specify: red or black
can be used on some 50s & 60s models, each
65-015 Speaker-board screen, (used in back of front metal grill screen), plastic fiber,
charcoal-black, for Seeburg Models 100J thru DS160. Can also be used
on other makes & models that have a front metal grill screen, 36” X 30”
- 90 -
$18.00
18.00
14.00
LINE CORDS, (POWER CORDS),
PLUGS & OUTLETS FOR LINE CORDS
A-1 PART #
71-016 Line cord 16/3 round, black, 10 foot length, with 90° flat, molded plug
$12.00
71-040 Line cord 18/2 round, black, (Type SJOW = Quality), 12 foot length, with
molded plug, for: AMi 40’s & 50’s models, Rock-Ola 40’s & 50’s models,
Seeburg’s through PFEAIU & APFEAI and Wurlitzer’s through model 3200
7.50
71-025 Plug, 2 prongs, non-polarized, black rubber cover, (Cooper quality), each
2.50
71-033 Seeburg M100A through DS160, Outlet, 3-wire grounded duplex receptacle,
(The WSR3, 5 or 7, TSR1–6 or TSU1–7 plugs into this and a 2 or 3 wire
line cord attaches to this), brown
9.00
71-026 Vinyl cube, plug-in-tap, converts the single A. C. socket in all WSR3, 5 or 7,
TSR1–6 or TSU1–7 in Seeburg’s M100A through DS160 to 3 A. C. outlets
78-015 Toggle switch, (Main on-off switch), excellent replacement, for all models
3.00
6.50
LUBRICANTS
A-1 PART #
98-005 Luberplate, Aero lube, (white grease), for all Models, 3/8 oz. tube
$3.50
98-006 Lubricating oil, highest quality, genuine turbine oil, perfect for lubricating
mechanisms and motors, 4 oz. plastic bottle with 9” telescoping extension
3.50
98-007 “PB Blaster”, penetrating fluid for loosening frozen parts, 12 oz. aerosol can
5.00
PLUGS & SOCKETS FOR SPEAKERS, ETC.
A-1 PART #
37-025
37-026
37-014
37-031
37-032
37-035
37-041
37-042
37-051
37-061
37-062
37-071
37-072
37-081
37-091
37-092
37-093
37-101
37-102
Plug, SMALL, 2 round prongs, for Mech. cancel switch, without a cover
Plug, SMALL, 2 round prongs, for Mech. cancel switch, with a cover
Plug, two flat prongs, used in TSR1, 2 & 3, (J7 plug for reject switch)
Plug, SMALL, round, 3 prongs, Amphenol, for muting switch, without a cover
Plug, SMALL, round, 3 prongs, Amphenol, with Aluminum cover
Plug, SMALL, round, 4 prongs, Amphenol or Cinch, for credit units,
some are molded, some have covers, some do not have a cover
Plug, Large, 4 prongs, Amphenol, without a metal cover
Plug, Large, 4 prongs, Amphenol, with a metal cover
Plug, SMALL, round, 5 prongs, Amphenol or Cinch, for credit units
Plug, Large, 5 prongs, Amphenol, without a metal cover
Plug, Large, 5 prongs, Amphenol, with a metal cover
Plug, SMALL, round, 6 prongs, Amphenol or Cinch, for credit units
Plug, SMALL, round, 6 prongs, Amphenol or Cinch, with Aluminum cover
Plug, Large, 6 prongs, Amphenol: used in Seeburg M100A, B/BL & C,
Speaker Plug, (With or Without a Metal cover)
Plug, Large, 7 prongs, Amphenol, (Dummy plug for early 50s Seeburg
Amps. & Speaker plug in Wurlitzer 501, 502 & 503 Amps.), without a cover
Same as A-1 Part # 37-091, Plug, Large, 7 prongs, but with a metal cover
Plug, Large, 7 prongs, Amphenol, (Original, Molded, Dummy plug), wires
cannot be attached because this plug is molded & cannot be opened
Plug, Large, 8 prongs, Octal, (Speaker plug in Wurlitzer: 1100 thru 1650 and
is used for converting Wurlitzer 1015, 1080 & 1100 to Free Play, no cover
Same as A-1 Part # 37-101, Plug, Large, 8 prongs, but with a metal cover
Plugs and Sockets are Continued on the next page
- 91 -
$5.00
6.00
7.00
5.00
8.00
5.00
12.00
15.00
6.00
15.00
18.00
6.00
8.00
20.00
22.00
25.00
25.00
17.00
20.00
PLUGS & SOCKETS FOR SPEAKERS, ETC, (Continued)
A-1 PART #
37-111 Plug, 9 pin miniature, (Looks like the bottom of a 12AX7 tube), for Seeburg
HFMA1 thru newer Seeburg Amps. & some Rock-Ola’s, without a cover
37-121 Plug, Large, 11 prongs, Octal, for credit units, etc. Without a metal cover
37-122 Same as A-1 Part # 37-121, Plug, Large, 11 prongs, but with a metal cover
37-125 Socket, for Large, 11 prong, Octal plug, each
37-131 Plug, 27 prongs, Jones plug for Seeburg Wired selection receivers
37-132 Socket, for 27 prong Jones plug
$7.50
17.00
20.00
12.00
25.00
25.00
POLISH FOR PLASTICS AND METALS
Novus plastic polish: for cleaning and restoring plastics. Recommended for Use on:
Plexiglas, Lexan, Lucite, Uvex and Acrylite. Please Note: The ideal polishing cloth
Is nonabrasive, absorbent lint free and disposable, (reusable cloths retain abrasive
particles that will scratch plastic surfaces. Always use a new polishing cloth).
A-1 PART #
50-007 Novus #1, gently cleans, shines & protects all plastic surfaces without scratching.
Resists fogging, repels dust & eliminates static, 2 FL. oz. squeeze bottle
$2.75
50-008 Novus #2, removes fine scratches, haziness & abrasions from most plastics
restores faded and discolored plastics, 2 FL. oz. squeeze bottle
4.00
50-009 Novus #3, removes scratches and abrasions from most acrylic surfaces.
Use Novus #3 when surface is too damaged to be restored using Novus #2, the use
of Novus #3 requires the use of Novus #2 for final finishing. 2 oz. squeeze bottle
4.50
50-012 Novus #1, #2 and #3, (Three pack of 2 oz. squeeze bottles), one of each
10.75
50-001 Novus #1, gently cleans, shines & protects all plastic surfaces without scratching.
Resists fogging, repels dust & eliminates static, 8 oz. non-aerosol pump bottle
6.50
50-002 Novus #2, removes fine scratches, haziness & abrasions from most plastics
restores faded and discolored plastics, 8 FL. oz. squeeze bottle
7.50
50-003 Novus #3, removes scratches and abrasions from most acrylic surfaces.
Use Novus #3 when surface is too damaged to be restored using Novus #2, the use
of Novus #3 requires the use of Novus #2 for final finishing. 8 oz. squeeze bottle
8.50
50-015 Novus #1, #2 and #3, (Three pack of 8 oz. bottles), one of each
20.50
50-018 Novus #2, removes fine scratches, haziness & abrasions from most plastics
restores faded and discolored plastics, 64 FL. oz. plastic bottle, this is
the economy size, ($14.50 off of eight of the 8 FL. oz. bottles of #2)
39.50
50-004 Maas metal polishing cream is made with a base of jeweler’s rouge. It Cleans,
polishes & preserves chrome, aluminum, stainless steel, etc., 2 ounce tube
7.50
50-005 Maas metal polishing cream is made with a base of jeweler’s rouge. It Cleans,
polishes & preserves chrome, aluminum, stainless steel, etc., 4 ounce tube
12.00
50-006 Maas micro-fiber polishing cloth, dry-treated with Maas metal polish,
for: Chrome, Silver, Brass, Copper, Stainless, Mirrors, Crystal & more,
one reusable cloth, (12” by 12”)
Information about 45 R.P.M. Records is listed on the next page
- 92 -
7.00
RECORDS, (7” 45 R.P.M. RECORDS)
As of April 6, 2015 our inventory of 45 R.P.M. records consists of approximately
12,000 pieces. All of the 45s on our Regular Price list are “new”. New to us means:
“Never played and in Mint condition”.
Our Newest Category of 45s is “Bargain Priced” 45s. Some of these 45s are used,
however, all are guaranteed against defects. All Bargain Priced 45s are currently
$2.25 each. A Blank Title Strip is included with every 45 R.P.M. record that we sell
and Laser Printed Title Strips are $.25 each.
All of our 45s are guaranteed against defects. Because our stock of 45 R.P.M.
records changes often, we do not offer a printed list of 45s. For a complete list of
45s please visit our website:
www.jukeboxusa.com
TITLE STRIPS & RECORD ACCESSORIES
Blank Program Title Strips for all 78 R.P.M. program title boards, (These strips are
not recommended for use with 45 R.P.M. program holders). Please note that every
other strip is “perforated” so a scissors must be used to cut every other strip,
horizontally.
A-1 PART #
87-015 Title strips, for 78 R.P.M. records only, Red border, Sheets are 3 1/16” wide by
11 5/16” long, (heavy stock), 20 strips per sheet, 15 sheets = 300 title strips
$4.00
Blank Program Title Strips for all 45 R.P.M. program title boards, these look like
the original, “Sterling”, title strips, (Arrows point to the artist). All sheets are 8 ½” wide
by 11” long, (heavy stock), each title strip is perforated. These sheets are perfect
for all computer-printers and typewriters. 20 title strips per sheet, (5 sheets = 100
title strips per package).
A-1 PART #
87-004 Title strips, blank, for 45 R.P.M. records, Red border, perforated, this style
looks like the original, “Sterling”, title strips, (Arrows point to the artist area),
20 strips per sheet X 5 sheets = 100 strips per package
$5.00
87-006 Title strips, blank, for 45 R.P.M. records, Blue border, perforated, this style
looks like the original, “Sterling”, title strips, (Arrows point to the artist area),
20 strips per sheet X 5 sheets = 100 strips per package
5.00
87-007 Title strips, blank, for 45 R.P.M. records, Green border, perforated, this style
looks like the original, “Sterling”, title strips, (Arrows point to the artist area),
20 strips per sheet X 5 sheets = 100 strips per package
5.00
87-005 Title strips, blank, for 45 R.P.M. records, Purple border, perforated, this style
looks like the original, “Sterling”, title strips, (Arrows point to the artist area),
20 strips per sheet X 5 sheets = 100 strips per package
5.00
87-009 Title strips, for 45 R.P.M. records, Blank, (No borders), perforated, this style
looks like the original, “Sterling”, title strips, (Arrows point to the artist area),
(“No border”), title strips are for our customers who own the Title Strip
Printing program and wish to print their own borders when they print their
title strips), 20 strips per sheet X 5 sheets = 100 strips per package
4.00
87-010 Title Strip Filing & Printing program for PCs, (CD by Low Profile Software),
(Compatible with: Windows 95, 98, 2000, ME, XP and Vista), not discountable
48.95
87-002 Record sleeves, white, for 7” 45 rpm records, each
87-003 Record sleeves, white, for 7” 45 rpm records, package of 100 pieces
- 93 -
.15
12.00
RUBBER GASKET
Sponge rubber, with permanent adhesive backing, for inside dome glass,
lid glass & other areas that require this original type, (heavy duty), cushion.
(Tell us the Make & Model number of your jukebox and we will supply
the correct length and size of gasket that you need).
A-1 PART #
64-001 Sponge rubber gasket, with permanent adhesive backing, original type,
black, 1/4" wide x 1/8” thick, per foot
64-020 Sponge rubber gasket, with permanent adhesive backing, original type,
black, 3/8” wide x 1/8” thick, per foot
64-002 Sponge rubber gasket, with permanent adhesive backing, original type,
black, 3/8” wide x 3/16” thick, per foot
64-003 Sponge rubber gasket, with permanent adhesive backing, original type,
black, 1/2” wide x 3/16” thick, per foot
64-004 Sponge rubber gasket, with permanent adhesive backing, original type,
black, 3/4” wide x 3/16” thick, per foot
$.65
.80
.90
1.15
1.40
TOOLS
A-1 PART #
98-001 Spring tension gauge for measuring tone arm weight, (for most jukeboxes),
(This is a Lifetime-quality item. This item is not discountable)
98-002 Points file, superior quality, (tungsten steel, lifetime-quality)
98-003 Contact, (points), adjuster, L shaped, chrome plated, lifetime-quality
98-008 Scriber, one end straight, one end L shaped, each end is threaded and
removable for scribing a tight area, lifetime-quality, made in USA
98-004 Low voltage tester, 5 to 50 volts AC/DC, (50 to 60 Hz), has visual
indicator and two insulated alligator clips
98-010 Circuit tester, 80 to 250 volts AC/DC, has visual indicator and probe, test leads
98-012 Hemostat, 5” straight end, for holding components while soldering, stainless
98-014 Hemostat, 5” curved end, for holding components while soldering, stainless
98-015 Flush Cutting Shear, Plato brand, has cushioned handles, made in The USA
$55.00
6.00
7.00
10.00
8.00
8.00
5.00
5.00
12.00
TUBES, (ELECTRON TUBES AND TUBE SOCKETS)
Please note: All Electron Tubes listed in this catalog are New and fully
Guaranteed to work to your complete satisfaction. We do not sell used tubes.
A-1 PART #
90-001
90-055
90-002
90-056
90-070
90-003
90-004
90-005
90-006
90-007
90-008
90-010
90-011
90-012
OA2 Electron tube
2A3 Electron tube, high quality, (Made in Russia)
2D21 Electron tube
5U4G Electron tube, high envelope, original pear shape, (Made in Russia),
We have reduced the price of this sought-after tube, to make it more affordable
5U4GB Electron tube, All Brand Names, (Made in U.S.A.), N.O.S., fully tested
5U4GB Electron tube, high quality, (Made in Russia)
5Y3GT Electron tube
5Z3 Electron tube
6AN8A Electron tube
6AU6 Electron tube
6AW8A Electron tube
6BA6 Electron tube
6BJ6 Electron tube
6BK7 Electron tube
- 94 -
$10.00
60.00
9.00
25.00
25.00
22.00
20.00
28.00
14.00
8.00
8.00
8.00
10.00
9.00
TUBES, ELECTRON TUBES & TUBE SOCKETS (Continued)
Please note: All Electron Tubes listed in this catalog are New and fully
Guaranteed to work to your complete satisfaction. We do not sell used tubes.
A-1 PART #
90-013
90-015
90-016
90-017
90-018
90-019
90-020
90-021
90-022
90-051
90-023
90-072
90-073
90-024
90-071
90-025
90-026
90-027
90-028
90-052
90-030
90-058
90-031
90-065
90-034
90-032
90-033
90-035
90-036
90-037
90-038
90-039
90-040
90-042
90-043
90-044
90-045
90-057
90-046
90-047
90-075
6BQ5 / EL84 Electron tube, very high quality, (Made in Slovak Republic)
6C6 Electron tube and # 77 have the same internal components
6CA7 Electron tube
6CG7 Electron tube
6CY7 Electron tube
6EU7 Electron tube, high quality, (Made in Russia)
6F6 Electron tube
6H6 Electron tube
6J5GT Electron tube, (Glass)
6J5 Electron tube, (Metal)
6J7 Electron tube, (Metal)
6L6GB Electron tube, All Brand Names, (Made in U.S.A.), N.O.S., fully tested
6L6GC Electron tube, All Brand Names, (Made in U.S.A.), N.O.S., fully tested
6L6GC Electron tube, excellent quality, (Russian “Svetlana”)
6L6GC Electron tube, “Tung-Sol”, Russian Power Tube, Special request
6N7 Electron tube
6SA7 Electron tube, (Metal)
6SC7 Electron tube, (Metal)
6SJ7 Electron tube, (Metal)
6SK7 Electron tube, (Metal)
6SL7GT Electron tube, (Glass), high quality, (Made in The U.S.A. or Russia)
6SN7GTB, Electron tube, (Glass), New old stock, (Made in USA)
6SN7GTB, Electron tube, (Glass), high quality, (Made in Russia)
6V6GT, Electron tube, (Glass), New old stock, (Made is USA)
6V6GT Electron tube, (Glass), high quality, (Made in Russia)
6X4 Electron tube
6X5GT Electron tube
12AT7 Electron tube, high quality, (Made in Russia)
12AU7A Electron tube
12AX7 Electron tube, same as # 7025, high quality, (Made in USA)
12BH7A Electron tube
30 Electron tube
41 Electron tube
76 Electron tube
77 Electron tube and 6C6 have the same internal components
79 Electron tube
80 Electron tube
2050 Electron tube, high envelope, original pear shape, highest quality
2050A Electron tube, all name brands, excellent quality
5879 Electron tube
6CM6 Electron tube, N.O.S. made in USA = Best replacement for 6973,
(Jumper pins 1 & 8 on the bottom of the tube socket when using 6CM6)
$20.00
9.00
28.00
15.00
14.00
32.00
20.00
12.00
14.00
15.00
14.00
21.00
35.00
18.00
26.00
12.00
8.00
17.00
12.00
12.00
24.00
27.00
20.00
24.00
19.00
12.00
14.00
22.00
21.00
16.00
28.00
30.00
20.00
24.00
9.00
10.00
28.00
24.00
24.00
19.00
14.00
90-053 6CZ5 Electron tube, = Replacement for 6973, (Use 6CZ5 with no
modifications if used with Seeburg or Wurlitzer Amps.)
18.00
90-048 6EM5 Electron tube, = Replacement for 6973, (Use 6EM5 with no
modifications if used with Seeburg or Wurlitzer Amplifiers)
18.00
90-054 6973 Electron tube, not a substitute, high quality, (Made in Russia)
90-037 7025 Electron tube, same as 12AX7, high quality, (Made in USA)
35.00
16.00
- 95 -
TUBES, ELECTRON TUBES & TUBE SOCKETS (Continued)
Please note: All Electron Tubes listed in this catalog are New and fully
Guaranteed to work to your complete satisfaction. We do not sell used tubes.
A-1 PART #
90-049 7199 Electron tube, high quality, (Made in Russia)
90-050 7868 Electron tube, (not discountable), (unavailable until further notice)
90-061 Tube socket / connector socket, 7 pin ceramic pc mount for pc boards in
Seeburg Models KS200, KD200 and L100, each
90-062 Tube socket, 8 pin octal ceramic pc mount for holding 5U4, 6L6 & 2050
tubes in pc boards in Seeburg Models KS200, KD200 and L100, each
90-063 Tube socket / connector socket, 9 pin ceramic pc mount for pc boards in
Seeburg Models KS200, KD200 and L100, each
90-064 Metal shield & inner spring, (covers 9 pin electron tubes such as 5879)
$55.00
85.00
5.00
5.00
5.00
5.00
WIRE, (TONE ARM WIRE)
A-1 PART #
71-050 Wire, tone arm wire, 4/32 gauge stranded, black, red, green, white, per foot
7.00
OUR COMPANY INFORMATION,
PROMISE & GUARANTEE
Our “Customer Satisfaction Guarantee” applies to every original jukebox part,
reproduction jukebox part and/or accessory that is purchased from us.
If you have any questions, please send us an Email or give us a call, anytime.
Copyright  2013 & 2015
2015 - 2016 Catalog
A-1 Jukebox & Nostalgia, Inc.
Exclusive Distributor of “Ken Arnold brand” and other “exact-reproduction” Parts for Jukeboxes
To Place an Order:
Email: [email protected]
Phone 410-945-8900
Fax Orders: 410-945-1946 (For Fax transmissions only. We have a Fax switch so please call 1st.)
Please Note: We now have a Fax Switch.
Our Fax machine will not receive your Fax unless you let us know that you want
to send a Fax transmissions to us. Please phone ahead or Email us to let us know
that you want to send us a Fax.
Please visit our Website: www.jukeboxusa.com
for a complete list of Jukebox parts, accessories for Jukeboxes
and a list of the 45 R.P.M. Records that we have in stock
- 96 -