Download RE60 TYPE

Beginning of changes
or
250.0“C
300.0
Acceptation
of changes
Cancellation
of changes
250.0“C
SP 300.0
Increase
the value
Decrease
the value
Fig.5. Change of set point
5. PROGRAMMING OF CONTROLLER PARAMETERS
5.1. Diagram of the controller menu
The controller service is presented on the fig.6. after pressing and
push-button during at least 2 seconds, the proholding the
gramming of parameters is possible. The transition between parameters is carried out by means of
and
push-buttons.
Some parameters can be invisible - it depends on the choice of the
control algorythm or the alarm configuration. The table 1 includes
the description of parameters. The return to the normal working
mode follows after pressing the
push-button or automatically
after 30 seconds from the last push-button pressure.
14