Download Preventive Maintenance Support

Transcript
Preventive Maintenance Support:
Dipstick Calibrations / Fluid Levels
2.4.3 Hot Check Procedure.
1. Operate the transmission in D (Drive) until normal operating
temperatures are reached:
• Sump temperature 71°C–93°C (160°F–200°F).
• Converter-out temperature 82°C–104°C (180°F–220°F).
• If the transmission temperature gauge is not present, check fluid
level when the engine water temperature gauge has stabilized and
the transmission has been operated under load for at least
one hour.