Download ENG - TZ250 Racing

ENGINE REMOVAL
ENG
EC4M0000
ENGINE REMOVAL
T 30 Nm (3.0 mdkg, 22 ftdlb)
T 8 Nm (0.8 mdkg, 5.8 ftdlb)
T11 Nm (1.1 mdkg, 8.0 ftdlb)
T 23 Nm (2.3 mdkg, 17 ftdlb)
T11 Nm (1.1 mdkg, 8.0 ftdlb)
T 30 Nm (3.0 mdkg, 22 ftdlb)
T 23 Nm (2.3 mdkg, 17 ftdlb)
Extend of removal
Preparation for
removal
Order
Part name
Q’ty
ENGINE REMOVAL
Hold the machine by placing
the suitable stand.
Cowling and fuel tank
Carburetor and carburetor box
Exhaust pipe
Clutch cable
Radiator hose 2
Radiator hose 3, 4
Drive sprocket
Shift arm
Spark plug cap
YPVS cable
Disconnect the CDI magneto lead.
4-71
Remarks
W
Support the machine securely so there
is no danger of it falling over.
Refer to “COWLING, INDUCTION
GUIDE, SEAT AND FUEL TANK”
section.
Refer to “CARBURETOR AND REED
VALVE” section.
Refer to “EXHAUST PIPE AND
SILENCER” section.
Disconnect at engine side.
Disconnect at water pump side.
Disconnect at cylinder head side.
Refer to “SHIFT SHAFT” section.