Download TP-6861

1.8 Metering Menu
1.8.1
1.8.2
Note: Not all of these engine metering submenus
may apply.
Generator Metering Submenu
D Volts displays the alternator output AC voltages.
The display shows all line-to-line
line-to-neutral
voltage
combinations
three-phase or single-phase configurations.
display also shows the average line-to-line
line-to-neutral voltages.
and
for
The
and
D Current displays the alternator output AC amps.
The display shows each line (L1-L2-L3) of
three-phase models or L1-L2 current for
single-phase models. The display also shows the
average current.
D Frequency (Hz) displays the frequency (Hz) of
alternator output voltage.
D Power kW displays the total and the individual L1,
L2, and L3 alternator output as actual output
values.
D Power Factor displays the total and individual line
power factor values.
D % Rated kW displays alternator output as a
percentage of the entered data value.
D Reactive Power kVAR displays the total and
individual L1, L2, and L3 kVAR.
D Apparent Power kVA displays the total and
individual L1, L2, and L3 kVA.
D % Rated kVA displays alternator kVA as a
percentage of the entered data value.
D Phase Rotation displays the actual generator
rotation.
Engine Metering Submenu
D Engine Speed (Tachometer) displays the engine
speed (RPM) at which the engine is presently
running.
D Oil Pressure displays the engine oil pressure.
D Coolant Temperature displays the engine coolant
temperature.
Rate displays the calculated fuel
consumption rate based on fuel injector outputs (if
available from ECM).
D Fuel
D Gen Battery Voltage displays the DC voltage of
the generator starting battery(ies) as measured by
the controller.
D ECM Battery Voltage displays the DC voltage of
the engine starting battery(ies) as reported from
the ECM.
D Oil
Temperature
temperature.
displays
the
engine
oil
D Coolant Pressure displays for the engine coolant
pressure.
D Fuel Pressure displays the fuel line pressure at the
generator set inlet for gas-powered models.
D Fuel Temperature displays the fuel supply
temperature.
D Fuel Used Last Run displays the accumulated
amount of fuel used since last reset (if available
from ECM).
D Crankcase
Pressure
crankcase pressure.
displays
the
engine
D Intake Air Pressure displays the engine intake
manifold air pressure if available.
D Intake Air Temperature displays the engine intake
manifold air temperature if available.
TP-6861 10/14
Section 1 Specifications and Features
21