Download PB-5

PARKING BRAKE CONTROL
< SERVICE INFORMATION >
PARKING BRAKE CONTROL
A
Component
INFOID:0000000001718283
B
C
D
E
PB
G
H
I
J
WFIA0338E
1.
Parking brake pedal assembly
2.
Equalizer
3.
Return spring
6.
Rear left cable
4.
Rear right cable
5.
Pin
7.
Front cable
8.
Adjusting nut
K
L
Removal and Installation
INFOID:0000000001718284
REMOVAL
1.
2.
3.
4.
5.
6.
7.
8.
9.
M
Remove instrument lower panel LH and knee protector using power tool. Refer to IP-12, "Instrument
Lower Panel LH".
Disconnect parking brake switch electrical connector.
Remove adjusting nut from threaded end of front cable.
Remove parking brake pedal assembly nuts.
Disconnect front cable from parking brake pedal assembly while
compressing legs of spring clip.
Remove parking brake pedal assembly.
Remove center console. Refer to IP-10, "Instrument Panel".
Remove front cable bolts, then remove front cable from vehicle.
Remove rear disc rotors. Refer to BR-33, "Removal and Installation of Caliper Assembly and Disc Rotor".
WFIA0138E
Revision: August 2007
PB-5
2008 Quest
N
O
P