Download 4. Adjustments

4. Adjustments
FinePix S6000fd/S6500fd Service Manual
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
<Note>
Always use a 800mm conversion lens.
AF Adjustment
< AF Adjustment Preparations >
(1)
(2)
(3)
(4)
Prepare a 800mm conversion lens.
Prepare a S9100/S9600 Multi-stripe chart.
Mount the camera on a zoom drive jig.
Set FOCUS MODE to the position of [S-AF].
When preparations (1) - (4) are complete,
press the [Enter] key on the PC.
<Fig. 4-12-1>
—> The [AF Adjustment (INF) Start] screen appears.
<Step 3>
AF Adjustment (INF)
(1)
(2)
(3)
(4)
Set FOCUS MODE to the position of [S-AF].
Set the zoom position to the side of the WIDE edge.
Place the S9100/S9600 Multi-stripe chart at a distance of 897.3+-1mm from top of the [Filter Ring].
Adjust the position of the camera so that the center of the
S9100/S9600 Multi-stripe chart is displayed in the camera LCD.
(5) Place the S9100/S9600 Multi-stripe chart at a
distance of 803.3+-1mm from plane side of the conversion lens.
When preparations (1) - (5) are complete, press the [Enter] key on the PC.
Top of Filter Ring
Multi-stripe chart
| <-------------------Center-----897.3+-1mm----------------------------------->
| Flat side
|
|<----------------Center-----803.3+-1mm---------------------------->
|
CAMERA
DRIVE JIG
Conversion lens (800mm)
< Setup for AF Adjustment >
—> The [AF Adjustment (INF) Start] screen start.
—> Write the adjustment data to the flash ROM when adjustment has been completed correctly.
4-30
<Fig. 4-12-2>