Download CONTENTS

Chery QQ Service Manual
465 Engine Mechanical System
procedures of installation
1 Install thermostat and new gasket, tighten
the bolt if necessary.
Notice: Place the gasket properly on the
entrance.
2 Tighten the bolt
3 Connect hose to the thermostat.
4 Connect intake hose to thermostat shell.
5 Install timing belt housing rear cover.
6 Install camshaft timing pulley, see the
installation illustration of camshaft timing
pulley for reference.
7 Install timing belt, see the installation
illustration of timing belt for reference.
HINT: Add drinking water and 3.3 liter
radiator protective liquid in the system,
drain the air of the engine body away.
V Replacement of thermostat
procedures of disassemble
1 Remove timing belt see illustration of
timing belt removal for reference.
2 Remove camshaft timing pulley ,see
illustration of camshaft timing belt removal
for reference.
3 Remove timing belt housing bolt and rear
cover of timing belt
4 Loosen and remove thermostat bolt.
5 Remove thermostat
- 30 –
Chery Automobile Co., Ltd