Download HP 3478A Digital Multimeter

Response:
Press the 34 78A SRQ
key. The calculator will
continue to beep every 1 0
seconds until the key is
pressed.
Response:
TESTING FOR PROGRAM CODES
PASSES ILLEGAL CODE TEST
You will be asked to
watch the 34 78A display
as it completes the
verification. The final
-hp-85 display indicates
WATCH 3478A DISPLAV
PASSES RANGE, FUijCTION,
AUTOZERO TEST
PASSES DISPLAV TEST
PASSES TRIGGER TEST
PASSES PRESET COMMANDS TEST
READINGS TEST PASSES
that all tests passed.
VERIFICATION COMPLETE ***
****
EHD OF VERIFICATION PROGRAM *
What the Test Does
Test 1. SELF TEST.
This test verifies that the 34 78A responds to the HP-18 CLEAR command and performs its internal self test.
Test 2. PROGRAM CODES.
The test starts by verifying that the 34 78A can send an SRQ and that the computer will respond to it. Next, an illegal code is sent to the 34 78A to be certain
that it rejects it. Then, all possible combinations of autozero, function and range
codes are sent to the 34 78A. In addition, all display modes, trigger modes and the
preset commands are tested. Finally, two readings are taken. One from the the
300V de range that is checked to be sure there are no offsets. The second
reading checks for an overload condition from the 2-wire ohms mode.
72