Download ILO - Schematics Forum
Transcript
8.Press Upgrade button and start update process. 9. The update process is successful as the progress bar is 100%. After the update process is ok, turn off power and wait indicator light is off. Turn on power and TV can work. Checking : It is needed to check the version of the firmware for MT5351AG which has been download into the Plasma TV . Press Menu button of the remote control and the main OSD menu is appeared on the screen . Use the remote control and select the DTV menu . following input “0000” (zero , zero , zero , zero) of the remote control .Then enter the mode of factory after input the digits . It is easy to be found the version of the current firmware for MT5351AG is “PDP4210EA1 CLA_QAM_XXXXXX_XX”under the mode of factory . 119/125