Download ac-w13cg

Air Conditioner
Service Manual
http://splitoff.ru/tehn-doc.html
,
,
,
.
2
MODEL:
AC-W13CG
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
3
CONTENTS
TECHNICAL SPECIFICATION.............................................................................................................. 4
PERFORMANCE CURVE ...................................................................................................................... 5
OUTLINE & DIMENSIONS ................................................................................................................... 6
EXPLODED VIEW & PARTLIST........................................................................................................... 7
CIRCUIT DIAGRAM .............................................................................................................................. 9
PCB FUNCTION MANUAL................................................................................................................. 10
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
4
TECHNICAL SPECIFICATION
Content
Function
Power supply
Capacity
(W)
(BTU/h)
Rated input (W)
Rated current (A)
Air flow (m3/h)
Dehumidifying volume (L/h)
EER(W/W)
Fan type/piece
Diameter-length(mm)
Evaporator
Row-fin distance(mm)
Working area(m2)
Indoor side
Swing motor
Input(W)
Fuse (A)
Working capacitor (µ F)
Noise(dB(A))
Compressor Model
L.R.A. (A)
Throttling method
Starting method
Working temp.
Condenser
Outdoor unit
Pipe-diameter
Row-fin distance (mm)
Working area
Type-piece
Noise (dB(A))
Diameter
Defrosting method
Motor fan speed (rpm)
Output power (W)
Dimension (W x H x D) (mm)
Net weight (kg)
Refrigerant charge
AC-W13CG
Cooling
1Ph 220~230V-50Hz
3200
10922
1390
6.5
430
1.6
2.4
Centrifugal fan-1
217mm x 90
Aluminum fin–copper tube
2-14
0.11
SM002
4
Controller 3.15A
3.5 µ F/450V
51
C-RV222H1AA
31
Capillary
Capacity starting
≤115oC
Aluminum fin-copper tube
9.52
2-1.8
0.16
Axial fan-5
57
325
Auto defrosting
970/900/850
60
570 x 380 x 590
45
R22/670g
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
5
PERFORMANCE CURVE
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
6
OUTLINES AND DIMENSIONS
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
7
EXPLODED VIEW & PART LIST
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
8
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
38
39
40
41
42
Part name
Fliter net
Front panel
Horizontal air guider
Cover of switch
base plate
Swing motor
Drain pan
Plug
Slide block
Knob
Swing switch
Mask
Thermostat
Insulating gasket D
Main switch
fan capacitor
Compressor capacitor
Capacitor clamp
Electric box
Propeller housing
Chassis assembly
Compressor
Capillary assembly
Rear insulation plate
Condencer
Cabinet
Top cover of condensor
Axial flow fan
Motor support
Motor
Top connection plate
front insulation plate
Centrifugual fan
insulation plate of housing
Top cover of evaporator
Evaporator
Cross beam
connecting lever
Air guider
Power cord
Qty
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
9
CIRCUIT DIAGRAM
These circuit diagrams are subject to change without notice. Please refer to the ones stuck on the
machines.
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
10
PCB FUNCTION MANUAL
A. Running mode
1. Cool
2. Dry
3. Fan
4. Heat
5. Auto
6. Manual operation
B. Controlling contents
1. Indoor unit fan motor (high, middle and low speed)
2. Compressor
3. Sweep fan motor
4. Buzzer
5. Reversing valve
6. Electrical heater
C. The parameter to be input
1. The set mode
2. The set temperature of the indoor (shorten form is Test)
3. The set speed
4. The mode of timer
5. The ambient temperature of the indoor unit (shorten form is Tin)
6. The temperature of the defrosting sensor (shorten form is Tde)
7. The sweep mode
D. The basal control modes
Cooling mode
1
2
3
4
5
If Tin ≥ Tset + 1oC cooling mode act, compressor run, unit fan motor and sweep fan motor run in the
set speed, reversing valve stop.
If Tin ≤ Tset –2oC compressor stop, unit fan motor and sweep fan motor run in the set speed.
If Tset –2oC < Tin < Tset +1oC keep running in the old mode.
In the cooling mode, the range of Tset is 16oC ~ 30oC and it can be set in CON.
Compressor restart in 3 min after the unit stop and won’t stop during the following 6 min because Tin
and Tset.
Drying mode
1
2
3
4
5
6
If Tin > Tset, drying mode act.
If Tin < Tset drying mode stop, compressor stop, unit fan motor run in low speed.
If Tin ≤ Tset-2oC, compressor and fan motor stop.
Unit fan motor run for 6 min in low speed, compressor stop, fan motor run in low speed. After 4 min,
unit fan motor running low speed for 6min. Then run by this cycle.
In drying mode, the range of Tset is 18oC ~30oC and it can be set in CON.
The protecting functions are same as cooling mode.
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
11
Fan mode
1
2
3
4
5
6
Unit fan motor can run in high, middle, low and auto speed, compressor stop.
If the different in temperature of Tin and Tset is 2~4oC, motor run in middle speed.
If the different in temperature of Tin and Tset is less than 2oC, motor run in low speed.
If the different in temperature changed, fan speed will change when the new difference is more or
less 1oC than the old one.
In drying mode, the range of Tset is 18oC ~ 30oC and it can be set in CON.
There is no protection mode in fan mode.
Heating mode
If Tin ≤ Tset-1oC, heating mode act, reversing, compressor run, unit fan motor run in the set speed and
the condition of avoiding the cold wind, sweep fan motor run in the set mode.
2 If Tin ≥ Tset+2oC, compressor stop, reserving valve is still electric then unit fan motor run in the low
speed.
3 If Tset < Tin < Tset+2oC, keep running in the old mode.
4 4-way valve stop in 4 min after unit stop.
5 When heating time exceed 45 min and Tde ≤ -8oC, defrosting mode act reversing valve and fan motor
stop, compressor still run.
6 When defrosting time exceed 8 min and Tde ≥ +10oC, defrosting stop, heating mode act. Reversing
valve run, fan motor run in the set speed and condition of avoiding cold wind.
7 Once heating mode act, and fan motor run in high or middle speed, electrical heater work and it
won’t work when fan motor run in low speed.
8 In heating mode, the range of Tset is 16oC ~ 30oC or it can be set in CON.
9 The conditions of avoiding cold wind, fan motor run in 30sec after compressor start.
10 The protection of compressor’s delay. Compressor restart in 3min later after it stop and won’t stop in
the following by Tin and Tset.
1
AUTO mode
1 If Tin ≥ Tset +1oC, cooling mode act, Tset =26oC unit fan motor run in set speed.
If Tin ≤ Tset –2oC, compressor stop and fan motor run in low speed.
If Tset +2oC < Tin < Tset +1oC the unit run in old mode.
2 If Tin ≤ Tset, heating mode act Tset =20oC. If Tin ≥ Tset +3oC, compressor and reversal valve stop, unit
fan motor run in low speed. If Tset < Tin <Tset +3oC, keep the old mode.
3
Press Λ or Ѵ to change Tset 1 ~ 2oC more or less.
Protection function
They are same as the protection functions of cooling or heating mode.
If Tin change, mode change first. There is no protection of compressor that compressor won’t stop
in the following 6 min once it run.
Others control
1
2
3
4
5
6
7
8
9
Timer
Manual operation
Sleep
Motor speed
Sweep motor
Running indicate light
Timer indicate light
Compressor indicate light
Buzzer
Model No.: AC-W13CG
Version: 1.0
: http://splitoff.ru/tehn-doc.html
http://splitoff.ru/tehn-doc.html
,
,
,
.