1
Download Installation, Maintenance, and Service Manual
Transcript
e-Q2B and eQ2B-CAL Siren Systems 290A6807 RIBBED BLACK ZIP CORD BLACK ZIP CORD BROWN RED + BAT RED GREEN GREEN RED BLACK WHITE ONE BP-200 OR TWO BP100 OR TWO ES100 RUMBLER 2 AUDIO (PIN 7) RUMBLER ENABLE (PIN 5) TIES TO RIBBED BLACK ZIP CORD CUT WIRE F1 15 AMP HORN RING OR MOMENTARY SWITCH RUMBLER SPEAKERS 5 9 7 11 12-POSITION TENSION CLAMP CONNECTOR P/N 140584-12 BLACK WHITE RED GREEN INSULATION STRIPPED 0.25 in (0.635 mm) B G W RE LK R H D N T SPEAKER OUTPUT INSULATION STRIPPED 0.275 in (0.7 mm) RED BAT −GND RUMBLER AMPLIFIER WHITE WHITE ZIP CORD CONNECTING THE BLACK ZIP CORD IN PARALLEL WITH THE MAIN SIREN SPEAKER COULD DAMAGE THE MAIN VEHICLE SIREN AMPLIFIER. 1. INSERT SCREWDRIVER TO OPEN TENSION CLAMP. 2. SLIP WIRE INTO CONNECTOR. 3. REMOVE SCREWDRIVER TO LOCK CLAMP ON WIRE. 3 12 RING HORN RMBLR RMBLR RADIO RADIO ENBL RADIO 1 RADIO 10 8 − GRN 6 − BLK 4 + WHT 2 PARK A/H AUX BRAKE GRND CYCLE + RED REMOTE MIC Chapter 3: Wiring the e-Q2B Siren System Figure 3.8 Rumbler 2 connections to the e-Q2B GREEN BLACK WHITE 23
