Download ELECTROMAGNETIC FLOW METER

Press
key from run mode: the display will be as shown here next.
Keys or change the digit,
moves the cursor.
Press
to confirm, the display will be as shown here next.
Press the key to exit and confirm the selection; press the key to exit and
delete the selection.
9.7.2.2.2 - LowCutoff %
Low Cutoff specifies the Qmax% value below which the instantaneous flow
measurement reading (direct or reverse) and the outputs are forced to zero.
Default: 0.0 Range: 0.0÷9.9
Press
key from run mode: the display will be as shown here next.
Keys or change the digit,
moves the cursor.
Press
to confirm, the display will be as shown here next.
Press the key to exit and confirm the selection; press the key to exit and
delete the selection.
9.7.2.2.3 - Max Limit %
When the measure variation is lower than Max Limit%, or higher but with a
lower time period than that set in Limit Time (s), the measure is not detected.
When the measure variation is higher than Max Limit% and with a higher time
period than that set in Limit Time (s), the measure is detected.
Default: 0.0 Range: 0.0÷9.9
Press
key from run mode: the display will be as shown here next.
Keys or change the digit,
moves the cursor.
Press
to confirm, the display will be as shown here next.
Press the key to exit and confirm the selection; press the key to exit and
delete the selection.
9.7.2.2.4 - Limit Time (s)
Sets the time limit used by the function Max Limit%.
Default: 00.0
Range: 00.0÷99.9
Press
key from run mode: the display will be as shown here next.
Keys or change the digit,
moves the cursor.
Press
to confirm, the display will be as shown here next.
Press the key to exit and confirm the selection; press the key to exit and
delete the selection.
9.7.2.2.5 - Direction
This parameter enables the flow direction measurement
Default: Fwd (positive flow)
Range: Fwd (positive flow); Rev (Negative flow); Bid. (bidirectional flow)
Press
key from run mode: the display will be as shown here next.
Press or to select the parameter setting.
0000137643
Rev. 1.0
19