Download WARNING - Sioux Tools

MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few
drops of oil and run for 10 seconds. This will help remove contaminants and reduce the formation of rust.
WARNING
Disconnect tool from air supply before installing or removing drill bit or making any adjustments
SOUND AND VIBRATION READINGS
Catalog No.
SDR10A Series
*Sound Pressure
dBA
77.7
*per PN8NTC1
*Sound Power
dBA
89.3
*per PN8NTC1
*Vibration
m/s2
Less than 2.5
*per ISO 8662
DECLARATION OF CONFORMITY
We, Sioux, Snap-on Power Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the
products
SDR10A SERIES
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792, ISO 12100-1, ISO 12100-2, ISO 8662, Pneurop PN8NTC1
following the provisions of
98/37/EC Directive.
May 1, 2009
Robert Hartman
Murphy, North Carolina, USA
Vice President and General Manager-Power Tools
Signature of issuer
Date and place of issues
Name and position of issuer
3