Download POWERGLIDE®

Transcript
PowerBrush Switch
1
Upright
Locked
in Place
2
Br
Re ush
set
Reclined
In Use
PowerBrush
ON / OFF
Power
Turn vacuum ON before
turning ON PowerBrush.
Press brush side
of button to run
PowerBrush.
PowerBrush will not run
when vacuum is locked in
upright position.
If debris is entangled in
brush, brushroll automatically turns off. Unplug cord,
remove debris, then press
red Brush Reset button.
If debris is keeping vacuum
from operating, unplug cord,
remove debris, and then
press Brush Reset button
to resume vacuuming.
Adjusting the Variable Suction
1
2
suction control
FULL
Twist Valve - Marker
moves to indicate REDUCED
suction level
suction control
FULL
Locate Variable Suction Control Valve.
Twist Valve - Marker
moves to indicate REDUCED
suction level
Full
Suction
Reduced
Suction
Full
Suctio
Twist counter-clockwise to reduce suction.
Reduced
Suction
NOTE: Some frieze carpets have long delicate fibers or threads that may be
damaged by rotating brush. Turn off the PowerBrush when cleaning this and
other similar types of carpet.
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
6
www.BISSELL.com