Download dB - Operator`s Manual

TROUBLESHOOTING
PROBLEM
8. The blades do not
engage
11. Uncertain or
ineffective braking
37
LIKELY CAUSE
SOLUTION
– the safety devices have cut in
– check that the conditions allowing
starting are met ( 5.2.b)
– problems with engagement
mechanism
– contact Your Dealer
9. Uneven cut and
– cutting deck not parallel to the
poor grass collection
ground
10. Unusual
vibrations while
working
EN
– check the tyre pressure ( 5.3.2)
– realign the cutting deck ( 6.3.2)
– blade cuts badly
– contact Your Dealer
– forward speed too high compared to
the height of the grass ( 5.4.5)
– reduce forward speed and/or raise
the cutting deck
– wait for the grass to dry
– collector channel is blocked
– remove the grass-catcher and
empty the collector channel
( 5.4.7)
– cutting deck is full of grass
– clean the cutting deck (
– blades are unbalanced or loose
– contact Your Dealer
– bolts and screws are loose
– check and tighten all the engine and
frame bolts
– the brake is not adjusted correctly
– contact Your Dealer
12. Erratic forward
– problems with the belt or the
movement, poor driengagement device
ve when going uphill
or if the machine has
a tendency to rear up
– contact Your Dealer
13. With the engine – move the disengagement lever to
running, the machine
position «B»
does not move when
the drive pedal is
pressed
– move it to position «A» (
5.4.10)
4.33)
If problems continue after having carried out these operations, contact your dealer.
WARNING!
Do not take on complicated repair work if you don't have the
necessary equipment or the technical knowledge. The warranty is automatically voided and the manufacturer is not held responsible if repairs are done
badly.