Download Aluminum Jack

SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
The Omega Aluminum Jack is designed to lift, but not support, one end of a vehicle. The jack must be used in
conjunction with a pair of appropriately rated jack stands. This Jack has a unique feature, which provides fast, no
load lifts to the jacking point.
!
WARNING: Never use a hydraulic jack as a stand alone support device. After lifting, immediately support the
lifted vehicle with appropriately rated jack stands. Never place any portion of your body under the vehicle when
lifting or lowering.
Two-piece
Handle
Air Vent Screw
Saddle Pad
Saddle
Lifting Arm
Front Roller
Handle Sleeve
Handle Lock
Fastener
Caster
Pump Piston
Figure 1 - Model 26022 Nomenclature
2