Download RINO book.book

RINO_EN.book Page 56 Thursday, June 10, 2010 5:21 PM
INSTALLATION
4
ELECTRICAL CONNECTIONS
 Complete the installation in line with low voltage regulations and applicable rules.
 Use cables with sufficient section, and always earthed.
 Check the manufacturer's instructions for all the elements installed.

Electrical connections
(photocells without testing)
R.E
ANT
SMF
FCC
FCA
A.T
A.P
SG.A
SG.C
Plug-in receiver
Cable connectors for antenna
Traffic light card AEPS1-001
Magnetic closing limit switch (reed)
Magnetic opening limit switch (reed)
Total opening key command
Pedestrian opening key command
Opening safety device (mechanical strip or
photocell)
Closing safety device (mechanical strip or
photocell)
56 Installation Guide
AUX
FT
STOP
LG
DEST
E1
Output (24Vdc, 300mA)
Constant output in order to feed peripheral
devices (photocells without testing)
24Vdc Output for photocell testing
Emergency pushbutton
Garage light
(230Vac: max. 2,300W resistive)
(125Vac: max. 1,250W resistive)
Flashing light
(125/230Vac, max. 60W)
A1 Operator encoder cable connectors
Instalacion_95.fm - 4/6/10
(photocells with testing)