Download 2 Pulse

Lista del menú (en el visualizador)
Las siguientes opciones están disponibles en cada menú.
“xx…” en la tabla significa el parámetro de cada elemento.
Menú
Elemento
Parámetro
Ajuste
inicial
COMPLETE
[xxxxxxxxxx]
RETRY, SAVE EXIT, WRN CHECK,
PHASE INFO, DIST. INFO,
LEVEL INFO, EXIT
SAVE
EXIT
WARNING CODE [xxx:4x]
FL, FR, C, SLA, SRA, SLB, SRB, SBL,
SBR : 0, 1, 2, 3, 4
Auto Calibration AUTO CAL START?
54321
MEASURING: TONE
MEASURING: T.S.P.
MEASURING: WOOFER
NO WARNING
ERROR CODE [xxx:3x]
RETRY? [xxxx]
F, SR, SB : 0, 1, 2, 3, 4
YES, EXIT
YES
CANCEL
CAL TYPE [xxxxxxxxx] ENGINEER, FULL FLAT,
FRONT REF, OFF
FULL
FLAT
POSITION [xxxxxxxx]
POS.1, POS.2, POS.3
POS.1
TEST TONE [xxxxxxxx]
OFF, L a SW (AUTO), L a SW (FIX)
OFF
PHASE NOISE [xxxxxxx]
OFF, L/C, C/R, R/SL, R/SR, SR/SL,
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
OFF
PHASE AUDIO [xxxxxxx] OFF, L/C, C/R, R/SL, R/SR, SR/SL,
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
OFF
NAME IN ? [xxxxxxxx]
Level Settings
–10,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
–10,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
CENTER [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
SURROUND L [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
SURROUND R [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
SUR BACK [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
SUR BACK L [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
SUR BACK R [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
SUB WOOFER [xxx.xdB]
–20,0 dB a +10,0 dB (pasos de 0,5 dB)
0 dB
D. RANGE COMP. [xxx]
OFF, AUTO, STD, MAX
AUTO
Ajustes de opciones
FRONT L [xxx.xdB]
FRONT L [xxx.xdB]
Continúa
153ES