Download 1 - Fagor

English
a
Install feet on underside
radiator, push them in fully.
b
The legs may be screwed in place.
Before inserting the screws, align
each leg with the vertical lines on
the eco-heater, so that the holes
in the leg (where the screws are
to be inserted) coincide with the
holes in the eco-heater. Tighten
the screws until the legs are firmly
fixed to the appliance.
NOTE: On 650W eco-heaters,
only one leg may be screwed in to
the central part of the eco-heater.
It is therefore recommended to fit
the legs in place without screwing
them in.
c
of
One Ø 4.8 x 16 screw
for each leg
Position the radiator on the floor
where appropriate, respecting
minimum distances indicated in
Figure 1.
Figure 1
potential ledge
25 mm
minimum
150 mm
minimum
wall or
nearest
object
wall or
nearest object
on the left
wall or nearest
object on the
right
PROFILE
100 mm minimum
250 mm minimum (side of controls)
21