Download Q-Spot 560 LED Quick Reference Guide Rev. 5 Multi

EN
Q-Spot™ 560 LED QRG
DMX Linking
DMX
Connection
Master/Slave
Connection
The Q-Spot™ 560 LED will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The Q-Spot™ 560 LED uses a regular DMX data connection for its DMX
personalities: Basic and Advanced. See the User Manual to connect and
configure for DMX operation.
The Q-Spot™ 560 LED uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting
Omega Bracket
Safety Cable
Product
Mounting
Diagram
Floor Mounting
Overhead Mounting
Control Panel
Description
Button
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Password After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
<MENU>
3