Download Intimidator Spot LED 250 Quick Reference Guide

Transcript
EN
Intimidator™ Spot LED 250 QRG
Menu Options
Main Level
DMX Address
Operation Modes
Pan
Tilt
Display
Channel Mode
Manual Pan Restrict
Manual Tilt Restrict
Reset
Load
Programming Levels
001~512
SLAv (Son)
NASL (SLoU)
NAFA (FASt)
NStS (SrUn)
Normal Pan
PAn
Inverse Pan
r PAn
Normal Tilt
tiL
Inverse Tilt
r tiL
Normal Display
diS
Inverse Display
r diS
13-Channel Mode
13CH
8-Channel Mode
8CH
PA54
Pan 540º
Pan 360º
PA36
Pan 180º
PA18
Tilt 270º
Ti27
Tilt 180º
Ti18
Tilt 90º
Ti 9
Description
Sets the DMX starting address
Slave operating mode
Automatic Mode, Slow Program
Automatic Mode, Fast Program
Sound Active Mode
Normal Pan operation
Inverse Pan operation
Normal Tilt operation
Inverse Tilt operation
Change the LCD display text position
Selects the DMX personality
Select Pan angle restrictions
Select Tilt angle restrictions
Resets product
Load factory defaults
rESt
LoAd
DMX Linking The Intimidator™ Spot LED 250 can work with a DMX controller when
linked using a regular DMX serial connection. Instructions for connecting
and configuring this product for DMX operation are in the User Manual. If
you are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
Starting Address To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 502.
Master/Slave The Intimidator™ Spot LED 250 uses the DMX data connection for
mode. Instructions for connecting and configuring this product
Connection Master/Slave
for Master/Slave operation are in the User Manual.
5