Download literature.rock...lautomation.com

B.
Transformadores de Aislamiento uso Rectificador
•
IEEE C57.12.00-1993, IEEE Standard General Requirements for Liquid-Immersed Distribution
and Regulating Transformers.
•
IEEE C57.12.01-1989, IEEE Standard General Requirements for Dry-Type Distribution
and Power Transformers.
•
ANSI C57.12.10-1988, American National Standard for Transformers – 230 KV and Below
833/948 through 8333/10417 KVA, Single-Phase, and 750/862 through 60000/80000 KVA
with load TAP Changing – Safety Requirements.
•
ANSI C57.12.51-1981, American National Standard Requirements for Ventilated Dry-Type
Power Transformers, 501 KVA and Larger, Three-Phase with High-Voltage 601 to 34500
volts, Low-Voltage 208Y/120 to 4160 Volts.
•
ANSI C57.12.70-1978, American National Standard Terminal Markings and Connections
for Distribution and Power Transformers.
•
IEEE C57.12.90-1933, IEEE Standard Test Code for Liquid-Immersed Distribution, Power
and Regulating Transformers and IEEE Guide for Short Circuit Testing of Distribution and
Power Transformers.
•
IEEE C57.12.91-1995, IEEE Standard Test Code for Dry-Type Distribution and Power
Transformers.
•
IEEE C57.18.10-1998, IEEE Standard Practices and Requirements for Semiconductor
Power Rectifier Transformers.
•
IEEE C57.124-1991, IEEE Recommended Practice for the Detection of Partial Discharge
and the Measurement of Apparent Charge in Dry-Type Transformers.
•
IEC 60076-1, Power Transformers: General.
•
IEC 60076-2, Power Transformers: Temperature rise.
•
IEC 60076-3, Power Transformers: Insulation levels and dielectric tests, Amendment No.1.
•
IEC 60076-3-1, Power Transformers: Insulation levels and dielectric tests. External
clearances in air.
•
IEC 60076-4, Power Transformers: Tappings and Connections.
•
IEC 60076-5, Power Transformers: Ability to withstand short circuit.
•
IEC 60616, Terminal and Tapping Markings for Power Transformers.
•
IEC 60722, Guide to the Lightning Impulse and Switching Impulse Testing of Power
Transformers and Reactors.
•
IEC 60726, Dry-type Power Transformers.
•
IEC 61378-1, Converter Transformers, Part 1: Transformers for Industrial Applications