Download AXIS 206 Network Camera Installation Guide

AXIS 206 Quick Installation Guide
Page 3
AXIS 206 Network Camera
Quick Installation Guide
Front
Mounting
lock ring
Rear
Serial number
label
Status
indicator
(outer ring)
ENGLISH
Focus
ring
Network
indicator
Control
button
Network
connector
Power
indicator
Power
connector
Follow these steps to install the AXIS 206 on your local network (LAN):
1. Familiarize yourself with the camera (this page).
2. Connect the camera - see Cable Connections, on page 4.
3. Assign an IP address - see Installation Methods, on page 4.
For more information, please see the User’s Manual, which is available on the CD
included in this package. Updated versions can be obtained from www.axis.com
Package Contents
Item
Notes
Network Camera
AXIS 206.
Power adapter
The adapter is country-specific. Please check that the adapter is correct for your location.
Camera stand
Supplied with 3 mounting screws. The extension section is ready fitted.
Cable clip
Fixes to back panel for holding power cable.
CD
Documentation and software.
Printed Materials
•
AXIS 206 Quick Installation Guide
•
Axis Warranty Document