Download AXIS 207 Network Camera Installation Guide

AXIS 207 Installation Guide
Page 3
AXIS 207 Network Camera
Installation Guide
Mounting
lock ring
Status
indicator
(outer ring)
I/O
Terminal
connector
Microphone
Network
indicator
Serial number
S/N
Control
button
Power
indicator
Network Power
connector connector
Follow these steps to install the AXIS 207 on your local network (LAN):
1. Connect the camera - see Cable Connections, on page 4.
2. Assign an IP address - see All installation methods, on page 5.
For more information, please see the User’s Manual, which is available on the CD
included in this package. Updated versions can be obtained from www.axis.com
Package Contents
Item
Network Camera
Power adapter
Camera stand
Flexible clamp
I/O terminal connector
CD
Cable clip
Printed Materials
Notes
AXIS 207
PS-L (country-specific) Please check that the adapter is correct for your location
Supplied with 3 mounting screws. The extension section is ready fitted
For shelf mounting
4-pin I/O terminal connector - 1 transistor output, 1 digital input, auxiliary power and GND
Documentation and software
Self-adhesive - fixes to back panel for holding power cable.
AXIS 207 Installation Guide
Axis Warranty Document
ENGLISH
Product ID
Focus
ring