Download LED TV
Transcript
Viewing the Control Panel The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Selecting the Media Play Selecting the Menu Down (Front) Selecting a Source Function menu Right Left Return Remote control sensor Up (Rear) Power off ✎✎The product color and shape may vary depending on the model. ✎✎Exits the menu when pressing the controller more than 1 second. ✎✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions. Standby mode Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord. Setup (Initial Setup) When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Set the initial setup following instructions that the TV guides. ✎✎Setup is available only when the Source is set to TV. ✎✎To start the Setup, enter the password using the remote control. The default password is 0-0-0-0. If You Want to Reset This Feature... OO MENUm → System → Setup → ENTERE English - 6 [UF4005-5005-ZS]BN68-05756A-00L02.indb 6 2013-12-03 �� 11:08:06