Download Installation Instructions

If you are replacing your plumbing valve, see below for four common plumbing methods. Specific rough-in fittings are not supplied. These may be
required for installation. Remove existing handle and valve trim before
replacing your valve. Please follow all local building and plumbing codes.
English
English
1. Determining Your Existing Rough-In Plumbing Installation
PEX
Copper
Helpful Tools
Helpful Tools
For safety and ease of faucet replacement,
Moen recommends the use
of these helpful tools.
For safety and ease of faucet replacement,
Moen recommends the use
of these helpful tools.
Safety Glasses
Measuring Tape
Pi p e J o i n t
Co m po u nd
Torch
Safety Glasses
Front View
Measuring Tape
Pipe Joint Compound
Front View
Wire Brush
Phillips Screwdriver
Tube Cutter
Crescent Wrench Thread Seal Tape Phillips Screwdriver
Lead-free Solder Kit
Thermometer
Thread Seal Tape
Pi p e J o i n t
Co m po u nd
Crescent Wrench
Back View
Flashlight
Full Circle Crimping Tool Thermometer
Tubing Cutter
Pipe Joint Compound
Key Hole Saw
IPS – (Galvanized Iron Pipe/Threaded Connections)
Back View
Flashlight
Key Hole Saw
CPVC
Helpful Tools
Helpful Tools
For safety and ease of faucet replacement,
Moen recommends the use
of these helpful tools.
For safety and ease of faucet replacement,
Moen recommends the use
of these helpful tools.
Pi p e J o i n t
Co m po u nd
Safety Glasses
Front View
Measuring Tape
Safety Glasses
Thermometer
Measuring Tape
Pipe Joint Compound
Front View
Crescent Wrench Thread Seal Tape Phillips Screwdriver
Crescent Wrench
Adjustable Wrench
Back View
Flashlight
CAUTION – TURN HOT & COLD WATER SUPPLIES OFF BEFORE REMOVING YOUR CURRENT FAUCET OR DISASSEMBLING YOUR CURRENT
VALVE. OPEN FAUCET HANDLE TO RELIEVE WATER PRESSURE AND
ENSURE COMPLETE WATER SHUT-OFF HAS BEEN ACCOMPLISHED.
E4
CPVC Cement Thermometer CPVC Cleaner Tubing Cutter
Pipe Joint Compound
Key Hole Saw
CPVC
C le a n er
CPVC
C e m e nt
Pi p e J o i n t
Co m po u nd
Thread Seal Tape Phillips Screwdriver
Back View
Flashlight
Key Hole Saw
CAUTION – TURN HOT & COLD WATER SUPPLIES OFF BEFORE REMOVING YOUR CURRENT FAUCET OR DISASSEMBLING YOUR CURRENT
VALVE. OPEN FAUCET HANDLE TO RELIEVE WATER PRESSURE AND
ENSURE COMPLETE WATER SHUT-OFF HAS BEEN ACCOMPLISHED.
E5