Download H - Dr. Brown`s

-PAGEQUICKSTART
ASSEMBLY
IMPORTANT NOTE TO DR. BROWN’S MOMS: If you are a mom who is switching from
a traditional breast pump, you may experience a short transition period while your breasts
adjust to the compression technology of the Dr. Brown’s® Double Electric Breast Pump.
This transition period is typically a maer of a few days, and you will still achieve milk flow.
But if your milk volume seems slower at first, stick with it and you will see your milk volume
return. This will not impact moms who are using an electric pump for the first time.
This section serves as a quick-start reference for Dr. Brown’s moms that are
experienced with the Dr. Brown’s® Breast Pump. It is not a replacement for the
complete instructions provided in this Instruction Booklet. Please be sure to read these
thoroughly before expressing for the first time.
Before your first use and aer all other uses, it is important to wash your Breast Pump.
Be sure to follow the complete directions in the Cleaning section of this
Instruction Booklet.
ASSEMBLY
Aer cleaning, follow these steps to assemble your Collection Units:
Begin by placing the Bole Seal into
the boom of the Connector.
l
To install the Breastcup, insert into the
Connector and then push at the edges
to secure the Breastcup to the Connector.
l
Then secure the Collection Bole to the
Connector. Tightening the Collection Bole
firmly will seal the Bole Seal, but do not
over tighten.
Quick Start }
l
l
Make sure the Breastcup is sealed all
around. This is important for the pump
to function properly.
Note: Run your fingers and thumbs around
the edge to make sure the Breastcup
is affixed all around.