Download Installation Instructions Instructions d`Installation

Installation Manual
ENGLISH
Product Dimensions and Cutout Requirements
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4"or 3/8" diameter drill In each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
Figure 1. Product dimensions
CUT OUT
WIDTH
A
B
C
D
30”
MIN.28-1/2”
(72.4 cm)
MAX.29”
(73.6 cm)
MIN 19”
(48.3 cm)
MAX 19-5/8”
(49.8m cm)
2-1/2”
(6.35 cm)
MIN 1-1/2”
(3.8 cm)
36”
MIN 34-1/2”
(87.6 cm)
MAX 35”
(88.9 cm)
MIN 19”
(48.3 cm)
MAX 19-5/8”
(49.8m cm)
2-1/2”
(6.35 cm)
MIN 1-1/2”
(3.8 cm)
Figure 2. Coutout dimensions
5