Download PN-K322B - Sharp Australia Support
Transcript
Turning Power On/Off • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Turning power on/off Press the power button ( ) to turn the power ON/OFF. To turn off the power, press and hold down the power button ( for about 2 seconds. Power button ( ) ) ENGLISH Caution Power LED Power lamp status Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • When switching the main power switch off and back on, always wait for at least 5 seconds. • For a complete electrical disconnection, pull out the main plug. Status of the monitor Green lit Power on Off Power off (Standby mode) Orange lit Input signal waiting mode Caution • When switching the power button ( ) off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. TIPS • When the main power switch is off, the monitor cannot be turned on. • If the monitor is in the input signal standby mode and you press the power button ( ), the monitor enters standby mode. 7 E