Download Corvette Accessory Drive Package

Installation Procedure:
The figure below shows the accessory drive package installed on 3. Install A/C compressor (88958093) with nut (15709703) and bolts
(11516360), (11516714) and (12552922) per Figure 4 below:
a typical small block application. Refer to this picture and following
pictures for clarification during the installation of the various
Figure 4
components included in this package.
11516360
15709703
For kit without air conditioning skip Steps 1 thru 4.
Figure 1
88958093
11516714
12552922
4. Install A/C belt tensioner (12595289) and belt (12579228) per
Figure 5 below:
1. Install stud, part number (12556447) per Figure 2 below:
Figure 5
Figure 2
12579228
12556447
12595289
2. Attach the Air Conditioning (A/C) compressor bracket (12569286)
to the engine with bolt (11515768). Orient the bracket as shown
in Figure 3 below:
5. Install the generator/power steering bracket (12578067) and
power steering bracket (12555222) with 3 bolts (11516357) and
bolt (11518631) per Figure 6 below:
Figure 6
Figure 3
12569286
11516357
12555222
11518631
11515768
TITLE
Corvette Accessory Drive Package Specifications
12578067
REV 06MR13
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
DATE
PART NO.
19202977
REVISION
SHEET
3
OF
12
AUTH