Download A-V Impulse™

Transcript
TABLE OF CONTENTS
4.4 REPLACING THE MEMBRANE FASCIA LABEL....................................................................EN-17
4.5 REPLACING THE MEMBRANE SWITCH PANEL..................................................................EN-17
4.6 REPLACING THE COMPRESSOR.....................................................................................EN-18
4.7 REPLACING THE RESERVOIR.........................................................................................EN-18
Remove the old reservoir.................................................................................................................................... EN-18
Dismantle the old reservoir................................................................................................................................. EN-19
Remove the fill and vent valves from the old reservoir...................................................................................... EN-19
Replace the fill and vent valves onto the new reservoir..................................................................................... EN-19
Rebuild the new reservoir................................................................................................................................... EN-19
Install the new reservoir into the case................................................................................................................ EN-19
4.8 REPLACING A FILL OR VENT VALVE PISTON.....................................................................EN-20
4.9 REPLACING A VALVE COIL.............................................................................................EN-21
4.10 REPLACING THE FAN ASSEMBLY..................................................................................EN-21
4.11 REPLACING THE VALVE DRIVER PCB ASSEMBLY.............................................................EN-23
4.12 REPLACING THE PROCESSOR PCB ASSEMBLY................................................................EN-23
4.13 REPLACING DISPLAY COMPONENTS.............................................................................EN-23
4.14 REPLACING THE EPROM.............................................................................................EN-25
4.15 REPLACING THE POWER SUPPLY ASSEMBLY.................................................................EN-25
4.16 REPLACING THE POWER CORD....................................................................................EN-26
4.17 REPLACING THE POWER INLET....................................................................................EN-26
4.18 REPLACING A FUSEHOLDER........................................................................................EN-27
4.19 REPLACING THE POWER SWITCH.................................................................................EN-28
5.0 UPGRADE ITEMS.........................................................................................................EN-29
6.0 LIST OF SUPPORTING ITEMS.........................................................................................EN-29
A-V Impulse System